# changelog

author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - tweak the PAM code some more to try to do a setcred() after initgroups()
  - pull in all of the optflags on i386 and sparc
  - don't explicitly enable Kerberos support -- it's only used for password
    checking, and if PAM is enabled it's a no-op anyway


author: Bill Nottingham <notting@redhat.com>
changelog:
  - i18n-ize initscript
  - add a sysconfig file for daemon options (#23550)
  - clarify smbpasswd man page (#23370)
  - build with LFS support (#22388)
  - avoid extraneous pam error messages (#10666)
  - add Urban Widmark's bug fixes for smbmount (#19623)
  - fix setgid directory modes (#11911)
  - split swat into subpackage (#19706)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - set a default CA certificate path in smb.conf (#19010)
  - require openssl >= 0.9.5a-20 to make sure we have a ca-bundle.crt file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix swat only_from line (#18726, others)
  - fix attempt to write outside buildroot on install (#17943)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - move initscript back
  - remove 'Using Samba' book from %doc 
  - move stuff to /etc/samba (#13708)
  - default configuration tweaks (#13704)
  - some logrotate tweaks


author: Than Ngo <than@redhat.de>
changelog:
  - add initdir macro to handle the initscript directory
  - add a new macro to handle /etc/pam.d/system-auth


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix yp_get_default_domain in autoconf
  - only link against readline for smbclient
  - fix log rotation (#9909)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - use cp rather than mv to preserve /etc/services perms (#4938 et al).
  - use mktemp to generate /etc/tmp.XXXXXX file name.
  - add prereqs on sed/mktemp/killall (need to move killall to /bin).
  - fix trigger syntax (i.e. "samba < 1.9.18p7" not "samba < samba-1.9.18p7")


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.0.5
  - fix mount.smb - smbmount options changed again.........
  - fix postun. oops.
  - update some stuff from the samba team's spec file.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add a mount.smb to make smb mounting a little easier.
  - smb filesystems apparently don't work on alpha. Oops.


author: Erik Troan <ewt@redhat.com>
changelog:
  - made the %postun script a tad less agressive; no reason to remove
    the logs or lock file (after all, if the lock file is still there,
    samba is still running)
  - the %postun and %preun should only exectute if this is the final
    removal
  - migrated %triggerpostun from Red Hat's samba package to work around
    packaging problems in some Red Hat samba releases


author: John H Terpstra <jht@samba.anu.edu.au>
changelog:
  - Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
  - Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
  - Compounded make line
  - Updated smb.init restart mechanism
  - Use compound mkdir -p line instead of individual calls to mkdir
  - Fixed smb.conf file path for log files
  - Fixed smb.conf file path for incoming smb print spool directory
  - Added a number of options to smb.conf file
  - Added smbadduser command (missed from all previous RPMs) - Doooh!
  - Added smbuser file and smb.conf file updates for username map


author: Tim Waugh <twaugh@redhat.com> 1.0.5-0.20010605
changelog:
  - CVS snapshot 2001-06-05.
  - Don't install xscanimage plug-in symlinks.  The old sane package never
    used to do this, and it looks confusing in gimp if you also have
    xsane-gimp (which is better) installed.  xscanimage works stand-alone
    anyhow.


author: Peng Wu <pwu@redhat.com> - 0.4.5-10.el5
changelog:
  - Resolves: rhbz#723204: scim-bridge segfaults when closing a dialog
    Add patch scim-bridge-0.4.5-fixes-null-imengine.patch


author: Jens Petersen <petersen@redhat.com> - 0.4.5-7.el5
changelog:
  - add scim-bridge-0.4.5-shutdown-with-X-211260.patch backported from cvs
    to fix agent lingering after desktop sessions (#211260)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-6.el5
changelog:
  - backport scim-bridge-0.4.6-compiz-focus-214149.patch to fix problem with
    preedit getting committed immediately (#214149)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-4.el5
changelog:
  - add scim-bridge-0.4.5-many-client-events-209573.patch from cvs to stop
    crash with long scim-chewing input (Ryo Dairiki, #211262)
  - add scim-bridge-0.4.5-preedit-underline-attribute-208921.patch from cvs to
    avoid underlining of Hangul in preedit (Ryo Dairiki, #211261)


author: Jens Petersen <petersen@redhat.com> - 0.4.5-3
changelog:
  - add scim-bridge-0.4.5-key-event-order-206261.patch from cvs to fix modifiers
    problem with scim-sinhala (Ryo Dairiki, #206261)
  - make im module subpackages require scim-bridge = ver-rel instead of
    /usr/bin/scim-bridge (#207872)


author: Jens Petersen <petersen@redhat.com> - 0.4.2-1
changelog:
  - update to 0.4.2 release (fixes #204657, #204337)
  - rename gtkimm and qtimm subpackages to gtk and qt respectively
  - move gtkimm xinput.d script to gtk subpackage
  - add qtimm xinput.d script to qt subpackage
  - require scim >= 1.4.4-33.fc6


author: Jens Petersen <petersen@redhat.com> - 0.3.1-1
changelog:
  - update to 0.3.1 release
  - buildrequire qt-devel
  - disable building oxygen source documentation for now
  - include html docs


author: Jens Petersen <petersen@redhat.com> - 0.2.3-2
changelog:
  - update with fixes from cvs (#197719)
  - fix input state caching across desktop sessions (Ryo Dairiki, #197775)


author: Jens Petersen <petersen@redhat.com> - 0.2.0-1.1
changelog:
  - update to 0.2.0
  - add scim-bridge-0.2.0-agent-fixes.patch from cvs to fix trigger event
    handling and config reload problems (Ryo Dairiki)


author: Petr Pisar <ppisar@redhat.com> - 1.2.10-9
changelog:
  - Fix dist macro expansion in spec code (Resolves: #440629)
  - Don't block SDL_WM_GrabInput() if window is not viewable (Resolves: #664771)


author: Thomas Woerner <twoerner@redhat.com> 1.2.10-6
changelog:
  - dropped libXt build requires, because libSDL does not need libXt at all - 
    this was an autofoo bug (fixed already)
  - fixed multilib devel conflicts (#192749)
  - added buidrequires for imake: AC_PATH_X needs imake currently


author: Christopher Stone <chris.stone@gmail.com> 1.2.10-4
changelog:
  - added missing (build) requires for libXt libXrender libXrandr
  - remove %makeinstall macro (bad practice)
  - use %{buildroot} macro consistantly


author: Thomas Woerner <twoerner@redhat.com> 1.2.10-1
changelog:
  - new version 1.2.10
  - dropped the following patches because they are not needed anymore:
    ppc_modes, gcc4, yuv_mmx_gcc4 and no_exec_stack
  - new pagesize patch (drop PAGE_SIZE, use sysconf(_SC_PAGESIZE) instead)


author: Thomas Woerner <twoerner@redhat.com> 1.2.6-2
changelog:
  - removed rpath
  - using O3 instead of O2, now (SDL_RLEaccel.c compile error)
  - added BuildRequires for nasm


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.2.3-5
changelog:
  - dlopen() aRts and esd rather than linking directly to them.
  - make sure aRts and esd are actually used if they're running.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.2.3-2
changelog:
  - Rebuild with new aRts, require arts-devel rather than kdelibs-sound-devel
  - Temporarily exclude alpha (compiler bugs)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - output same libraries for sdl-config whether --libs or --static-libs 
    selected.  Fixes compilation of most SDL programs.
  - properly packaged new HTML documentation


author: Tim Powers <timp@redhat.com>
changelog:
  - applied patch from Hans de Goede <hans@highrise.nl> for fullscreen toggling.
  - using  --enable-video-x11-dgamouse since it smoothes the mouse some.


author: Sam Lantinga <slouken@devolution.com>
changelog:
  - Re-integrated spec file into SDL distribution
  - 'name' and 'version' come from configure 
  - Some of the documentation is devel specific
  - Removed SMP support from %build
  LANG=C
  export LANG
  unset DISPLAY
   - it doesn't work with libtool anyway


author: Peng Wu <pwu@redhat.com> - 1.4.4-43.el5
changelog:
  - Resolves: rhbz#664464: scim leaks a 1x1 window per new xterm.
    Add patch scim-fixes-xwin-leaks.patch.


author: Peng Wu <pwu@redhat.com> - 1.4.4-42.el5
changelog:
  - Refresh scim_panel-observe-workarea-xprop-204442.patch and
    scim_panel_gtk-icon-size-fixes.patch for source rpm build.


author: Huang Peng <phuang@redhat.com> - 1.4.4-41.el5
changelog:
  - updated initial-locale-hotkey-186861.patch to fix null hotkey system 
    config overridden by hardcoded defaults. (#244761)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-39.el5
changelog:
  - fix scim-1.4.4-gtkimm-key-snooper-off-213796.patch to a more complete working
    backport from cvs (#214128)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-38.el5
changelog:
  - move dl modules used by im-scim.so back to scim-libs for multilib (#215750)
  - improve scim-restart to also restart xim socket and only kill user's own
    processes (#210450)
  - add scim-1.4.4-gtkimm-key-snooper-off-213796.patch to turn off key snooper in
    im-scim to avoid crashes when clicking during scim gtkimm preedit
    (Shawn Huang, #214128)
  - add Hangul keysym to Korean hotkeys (#212115)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-37.el5
changelog:
  - add scim-panel-observe-workarea-xprop.patch to make toolbar respect desktop
    work area (Takuro Ashie, #210448)
  - add scim_x11_frontend-ic-focus-LTC27940-215953.patch to fix XIM focus
    preedit commit issue (IBM Japan, #215953)
  - add scim-fix-unload-segfault.patch to fix xim process segfaulting
    when already running (Shawn Huang, #210449)
  - obsolete also iiimf-emacs and iiimf-le-sun-thai (#211875)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-36.el5
changelog:
  - replace gtk2 prereq by requires(post) and requires(postun) to workaround
    upgrading errors due to scim-libs being installed before gtk2 gets upgraded
    (#202543)
  - obsolete iiimf-csconv (#211875)
  - improve scim-restart script to also handle scim-bridge (#210450)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-35
changelog:
  - reduce tray icon size to 12 to fit button in
    scim_panel_gtk-icon-size-fixes.patch
  - add scim-gtkimm-underline-attrib-206397.patch and
    scim_x11_frontend-underline-attrib-206397.patch from upstream cvs (#206397)
  - make Chinese full/half width icons darker


author: Jens Petersen <petersen@redhat.com> - 1.4.4-34
changelog:
  - remove dist tag from xorg-x11-xinit requires (#204154)
  - remove scim-bridge-qt from xinput script for now
  - buildrequire gettext instead of gettext-devel


author: Jens Petersen <petersen@redhat.com> - 1.4.4-33
changelog:
  - update xinput.d script for scim-bridge
  - improvements to menu and full/half width icons (Andy Fitzsimon)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-32
changelog:
  - revert tray icon to a button to get transparency working (#198259)
  - better full/half icons (Andy Fitzsimon)
  - silence remove of old alternatives (#203794)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-31
changelog:
  - improve scim_panel_gtk-menu-recently-used-factories.patch to handle
    two letter locale and "other"
  - simplify scim_panel_gtk-systray-click-199187.patch to handle switching
    between tray menus better (Qingyu Wang)
  - add scim_backup-default-engine-2letter-locale.patch to improve matching of
    m17n maps (#197058)
  - add scim_utility-Assamese-locale-fix.patch to list Assamese as as_IN


author: Jens Petersen <petersen@redhat.com> - 1.4.4-30
changelog:
  - improvements to scim_panel_gtk-menu-recently-used-factories.patch
    - only list up to 5 recently used factories and only when more than 5 in menu
    - keep menu entry of recenty used factory in original place too
    - fix display of English/European entry
  - bring back Ctrl+space hotkey for Japanese and Korean users for backward
    compatibility (#201173)
  - include European keyboard in default factories again to avoid breaking
    deadkey support in XIM apps (lxo, #188357)
  - move scim modules to the main package


author: Jens Petersen <petersen@redhat.com> - 1.4.4-25
changelog:
  - suffix xinput file with .conf and bump priority to 82
  - xinput sub-scripts moved to a subdir
  - clearer new half-letter and half-punct icons (Andy Fitzsimon)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-24
changelog:
  - update to latest scim-1.4 branch
    - should fix systray icon transparency (Saturo Sato, #198259)
  - list factories on menu in most recently used order with
    scim_panel_gtk-menu-recently-used-factories.patch (#187027)
  - new set of icons based on Tango project design (Andy Fitzsimon, #187024)
  - change defaults to no sticky icon in toolbar and vertical lookup window
  - fix various icon size problems with scim_panel_gtk-icon-size-fixes.patch


author: Jens Petersen <petersen@redhat.com> - 1.4.4-22
changelog:
  - update to head of scim-1.4 branch
    - buildrequire doxygen and build html for snapshots
    - rawcode-unicode-maxlength.patch, scim-panjabi-punjabi.patch, and
      factory-menu-singlet-submenus-187027.patch no longer needed
  - prereq gtk2 >= 2.9.1-2 and ignore update-gtk-immodules errors
  - remove with_libstdc_preview macro


author: Jens Petersen <petersen@redhat.com> - 1.4.4-21
changelog:
  - changes to default system config (scim-system-default-config.patch):
    - set default IMEs for Chinese locale (#187028)
    - only set next and previous factory hotkeys for Chinese locale
    - do not set F9 as a hotkey in Korean locale (#195633)
    - disable rawcode, European keyboard, and various scim-tables Chinese tables
      by default (#187028)


author: Qingyu Wang <qwang@redhat.com> - 1.4.4-19
changelog:
  - add initial-locale-hotkey-186861.patch to implement locale-based subkeys
    to initialize users' hotkey configuration keys (#186861)
  - update scim-system-default-config.patch with localized hotkeys for
    Japanese and Korean


author: Jens Petersen <petersen@redhat.com> - 1.4.4-17
changelog:
  - update to scim-bridge 0.1.8 (#191329)
  - test factory-menu-singlet-submenus-187027.patch to avoid having language
    submenus for a single IME


author: Jens Petersen <petersen@redhat.com> - 1.4.4-11
changelog:
  - include experimental scim-bridge-0.1.2 by Ryo Dairiki (#185693)
    - make scim-bridge the default gtkimmodule for now
  - reenable qtimm module (#182177)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-10
changelog:
  - build without libstdc++so7 for now
  - turn on scim by default for all locale: add xinput.d/default
  - drop the redundant module dirs in scim-1.0/
  - add Alt-` to list of default hotkeys for Japanese users with us keyboard


author: Jens Petersen <petersen@redhat.com>
changelog:
  - make scim-libs prereq libstdc++so7 to avoid update-gtk-immodules error when
    installing on i386 (#186365)
  - setup xinput.d for some more locale (as_IN, or_IN, si_LK, vi_VN, and zh_HK)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-9
changelog:
  - make scim-libs prereq gtk2 > 2.8 to avoid update-gtk-immodules error
    when upgrading from FC4 (#183636)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-8
changelog:
  - add scim-system-default-config.patch
    - add Zenkaku_Hankaku as trigger hotkey for Japanese users
    - use static XIM event flow so deadkeys work under XIM in off state (#169975)
  - add alternatives as prereq for %post and %postun (pknirsch, #182853)


author: Warren Togami <wtogami@redhat.com> - 1.4.4-5
changelog:
  - Add epoch to iiimf Obsoletes so it actually removes it (#173071)
    NOTE: The goal of these Obsoletes is for the official supported 
    upgrade path to work smoothly.  If users want to use iiimf, they
    are free to do so but their package must be compatible.


author: Jens Petersen <petersen@redhat.com> - 1.4.4-3
changelog:
  - build conditionally with libstdc++so7 preview to workround libstdc++ weak
    symbol version conflicts for c++ gtk apps built with older gcc
    (Benjamin Kosnik, #166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - do not change scim_binary_version in scim.pc-versioned-moduledir-179706.patch
  - set qtimm to xim for now


author: Jens Petersen <petersen@redhat.com> - 1.4.4-2
changelog:
  - remove scim-reload-engines-165655.patch since it seems to break input after
    reloading configuration (#179807)
  - add gtkimm-clear-preedit-on-reset-174143.patch to clear the preedit buffer
    when IME turned off (Qian Shen, #174143)
  - add rawcode-unicode-maxlength.patch to improve input of unicode codes
    (James Su, #173102)
  - add scim.pc-versioned-moduledir-179706.patch to include api version in
    moduledir in scim.pc so that IMEs get installed in versioned dir by default
    (Akira Tagoh, #179706)


author: Jens Petersen <petersen@redhat.com> - 1.4.4-1
changelog:
  - update to 1.4.4 bugfix release
    - scim-gtk-langs-167090.patch no longer needed since 1.4.3
  - move scim dl modules to scim-libs for multilib to work correctly
    - define %scim_api


author: Jens Petersen <petersen@redhat.com> - 1.4.2-9
changelog:
  - enable linker symbol versioning now that mt_alloc is fixed (#173220)
  - buildrequire libXt-devel for configure
  - buildrequire autoconf, automake, and libtool for autoreconf


author: Jens Petersen <petersen@redhat.com> - 1.4.2-7
changelog:
  - make "reload config" reload IMEs with scim-reload-engines-165655.patch
    (Qian Shen, #165655)
  - add iiimf obsoletes for upgrading (#173071)


author: Jens Petersen <petersen@redhat.com> - 1.4.2-2
changelog:
  - add scim-restart script to make it easier to restart scim after updating
    IMEs with scim-add-restart.patch
  - add scim-gtk-langs-167090.patch to set gtk immodule language list empty
    for now so that rhgb doesn't load scim (Warren Togami, #167088)


author: Jens Petersen <petersen@redhat.com> - 1.4.0-3
changelog:
  - bring back the xinput alternatives settings for now
  - quote the postun readlink test (wcalee@myrealbox.com, #164674)


author: Jens Petersen <petersen@redhat.com> - 1.4.0-2
changelog:
  - initial build for Fedora Core
  - remove xinput alternatives settings out to IME packages
  - drop the old Chinese manual from docs for now
  - make scim-1.0 dirs accessible


author: Jens Petersen <petersen@redhat.com> - 1.3.3-1
changelog:
  - update to 1.3.3 release
  - disable linking with version-scripts for now since they cause some problems
  - disable building of static libs


author: Jens Petersen <petersen@redhat.com> - 1.3.2-1
changelog:
  - update to 1.3.2 test release
  - don't set xinput.d script executable
  - no need to set XMODIFIERS explicitly and QT_IM_MODULE in xinput.d script


author: James Su <suzhe@turbolinux.com.cn>
changelog:
  - implemented dynamic adjust feature for generic table module.
  - fixed key handling bug in generic table module.


author: James Su <suzhe@turbolinux.com.cn>
changelog:
  - Replaced highlight_start and highlight_end in scim_server
    and scim_frontend with AttributeList (scim_attributes.h)
  - Moved icons/* to data/icons and gtkstringview.* to
    utils/


author: James Su <suzhe@turbolinux.com.cn>
changelog:
  - merged signal system from libinti.
  - implemented namespace scim.
  - implemented referenced object.
  - version 0.3.0


author: James Su <suzhe@turbolinux.com.cn>
changelog:
  - improved table input method.
  - actually fixed the memleaks within IMdkit.
  - pumped the version to 0.2.1


author: James Su <suzhe@turbolinux.com.cn>
changelog:
  - version 0.1.4
  - added Embedded Lookup Table style into X11 FrontEnd.
  - use wchar_t instead of unsigned long if __STDC_ISO_10646__ defined.


author: James Su <suzhe@turbolinux.com.cn>
changelog:
  - version 0.1.0
  - many bugfixes.
  - Help window of X11 FrontEnd was implemented.
  - scim can exit cleanly.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-5
changelog:
  - scim-anthy-fix-kana-conversion.patch: fix direct kana conversion feature
    to get that work correctly. (#215692)


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-2
changelog:
  - scim-anthy-libtool-export.patch: fix a typo.
  - scim-anthy-fix-pending-state.patch: fix not composing roman character
    properly when any characters are still in pending queue after deleting.
    (#208074)
  - scim-anthy-dict-encoding.patch: revert the default dictionary encoding to
    EUC-JP.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-1
changelog:
  - New upstream release.
  - scim-anthy-1.0.0-pseudo-ascii*.patch: merged into upstream.
    removed from srpm.


author: Akira TAGOH <tagohr@edhat.com> - 1.0.0-4
changelog:
  - scim-anthy-1.0.0-pseudo-ascii.patch,
    scim-anthy-1.0.0-pseudo-ascii-insert-space.patch: applied to allow the ASCII
    characters with the capital letter without even turning off the IME. (#187721)


author: Akira TAGOH <tagoh@redhat.com> - 1.0.0-1
changelog:
  - New upstream release.
    - can input numerals when the candidate window doesn't appear. (#185934)
  - scim-anthy-symbol-style.patch: removed.
  - add Requires: gettext-devel
  - run aclocal and autoconf as well to regenerate Makefile properly.


author: Akira TAGOH <tagoh@redhat.com> - 0.9.0-3
changelog:
  - scim-anthy-symbol-style.patch: applied a backport patch from upstream CVS to
    add an UI for the symbol style. (#178400)


author: Jens Petersen <petersen@redhat.com> - 0.9.0-2
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - add scim-anthy-helper-moduledir.patch to tweak the helper module install dir,
    since scim.pc now returns moduledir with api-version
  - remove anthy-imengine-helper.la


author: Akira TAGOH <tagoh@redhat.com> - 0.8.0-2
changelog:
  - scim-anthy-wide-latin.diff: applied to fix a problem that the input character
    appears twice with the full size alphanumeric mode.


author: Akira TAGOH <tagoh@redhat.com> - 0.5.3-4
changelog:
  - Import into Core.
  - relying the file dependencies instead of the explicit package dependency
    of anthy since anthy-libs was gone.
  - clean up the spec file.


author: Ryo Dairiki <ryo-dairiki@mbm.nifty.com>
changelog:
  - add xinput.d alternatives setup in %post and %postun
  - provide scim-ja_JP and only uninstall xinput.d-ja_JP alternative if
    no scim-ja_JP left


author: Caius Chance <cchance@redhat.com> -0.3.1-11.el5
changelog:
  - Resolves: rhbz#220287 (Last candidate on lookup table is not a valid 
              candidate.)
    <<< Add logic to refit last look-up page.


author: Jens Petersen <petersen@redhat.com> - 0.2.1-5
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - update filelist since module dir is now api-versioned


author: Jens Petersen <petersen@redhat.com> - 0.2.1-1
changelog:
  - initial build for Fedora Core
  - version 0.2.1 buildrequires libchewing 0.2.7 or later
  - spec file cleanup


author: Qingyu Wang <qwang@redhat.com>
changelog:
  - First release of scim-standard-helper
  - Added helper functions for scim-standard-im
  - First release of scim-standard-im


author: Akira TAGOH <tagoh@redhat.com> - 0.2.2-6
changelog:
  - scim-hangul-0.2.2-swap-keybinding.patch: swap the keybindings to move
    the cursor on the candidate window according to the candidate window's
    orientation.


author: Akira TAGOH <tagoh@redhat.com> - 0.2.2-3
changelog:
  - scim-hangul-0.2.2-ascii-mode.patch: applied to support the ASCII input mode
    in scim-hangul. (#185506)


author: Jens Petersen <petersen@redhat.com> - 0.2.1-3
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - update filelist since moduledir is now api-versioned


author: Akira TAGOH <tagoh@redhat.com> - 0.2.0-5
changelog:
  - fixed the description of this package. (Ryo Dairiki)
  - scim-hangul-0.2.0-ignore-invisible-char.patch: applied to not commit any
    Hangul characters with the keys unrelated to Yetgeul. (#166138)


author: Jens Petersen <petersen@redhat.com> - 0.1.4-3
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - specify filelist more precisely


author: Huang Peng <phuang@redhat.com> - 0.5.91-16
changelog:
  - catch exceptions when load user data from files. (#231180)
  - save user data in temp files at first, and then overwrite old user data files. (#231180)


author: Shawn Huang <phuang@redhat.com> - 0.5.91-14
changelog:
  - add Obsoletes: miniChinput <= 0.3 to remove miniChinput when upgrading 
    from RHEL4 to RHEL5 (#211878).


author: Qian Shen <qshen@redhat.com> - 0.5.91-11.2
changelog:
  - remove " g_object_set ( renderer_num, "alignment", 0.5, NULL) " in add_column() to fit gtk2.10 in fc6


author: Qian Shen <qshen@redhat.com> - 0.5.91-9
changelog:
  - run aclocal/autoconf/automake before configure
  - to create new confiugre/Makefiles based on the 
  - modified configure.ac


author: Jens Petersen <petersen@redhat.com> - 0.5.91-4
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against it
  - update filelist since moduledir is now api-versioned


author: Jens Petersen <petersen@redhat.com> - 0.5.0-2
changelog:
  - add source url
  - add scim-pinyin-0.5.0-setup-ambiguity-cast.patch from cvs to fixing build
    on 64bit archs (Ryo Dairiki)
  - configure with --disable-static so only .la files need to be removed


author: Jens Petersen <petersen@redhat.com> - 0.9.3-1
changelog:
  - initial build for Fedora Core
  - update summary and url
  - add xinput.d script for scim one to source


author: Jens Petersen <petersen@redhat.com> - 0.2.0-2
changelog:
  - add scim-sinhala-remove-timeout-206253.patch to remember previous key event
    for longer than a second (#206253)
  - add scim-sinhala-help-text-206114.patch to add some keymap help (#206114)


author: Jens Petersen <petersen@redhat.com> - 0.2.0-1
changelog:
  - update to scim-sinhala-trans 0.2.0 from new upstream cvs
  - no longer uses surrounding text (#200403)
  - update url and spec file
  - add scim-sinhala-trans-autogen-automake.patch to build with current automake


author: Jens Petersen <petersen@redhat.com> - 0.5.6-3
changelog:
  - move iiimf-le-unit obsoletes to scim-m17n (#183305)
  - disable Indian script tables for now: they are now in m17n-db
    - added %indic_tables switch to allow them to be built


author: Jens Petersen <petersen@redhat.com> - 0.5.6-1
changelog:
  - update to 0.5.6 release
    - update tables-skip-ja-ko.patch
    - updates filelist for chinese tables


author: Jens Petersen <petersen@redhat.com> - 0.5.5-2
changelog:
  - remove the Japanese and Korean tables and their subpackages with
    tables-skip-ja-ko.patch and %{jk_tables}


author: Jens Petersen <petersen@redhat.com> - 0.5.4-1
changelog:
  - upstream 0.5.4 release
    - indic-icons-1.tar.gz, scim-tables-indic.patch, thai-table.patch, and
      scim-tables-cvs-20051018.patch are no longer needed


author: Jens Petersen <petersen@redhat.com> - 0.5.3-4
changelog:
  - add a Thai table derived from m17n-db with a Thai icon
  - separate the Indic tables and the additional language tables into separate
    language subpackages


author: Jens Petersen <petersen@redhat.com> - 0.5.3-3
changelog:
  - add 14 new Indic tables for Bengali, Gujarati, Hindi, Kannada, Malayalam,
    Punjabi, Tamil and Telugu in updated scim-tables-indic.patch
    - inscript tables are derived from iiimf unitle tables
    - new icons for all Indic tables by Amanpreet Singh Brar
    - Indic tables are now in new scim-tables-indic subpackage
  - make {chinese,japanese,korean} subpackages obsolete {zh,ja,ko}
  - make subpackages own /usr/share/scim/tables


author: Jens Petersen <petersen@redhat.com> - 0.5.3-1
changelog:
  - 0.5.3 release
    - replace scim-tables-0.5.1-add-hindi.patch with scim-tables-indic.patch
    - update files lists for new tables (ipa, latex, nepali, wu)
  - rename {zh,ja,ko} subpackages to {chinese,japanese,korean}


author: Jens Petersen <petersen@redhat.com> - 0.5.1-4
changelog:
  - initial build for Fedora Core
  - add Hindi inscript and phonetic tables and icon to additional tables


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.0.3-4
changelog:
  - enable hardcopy binding in default config (#521824)
  - apply some xterm tweaks also to xterm-* and reduce duplicates
    in default config (#474064)


author: Jesse Keating <jkeating@redhat.com> - 4.0.2-16
changelog:
  - Don't use %makeinstall, instead make install.
  - Change DDESTDIR to DESTDIR to do the right thing.
  - Comment out utf patch as it is no longer necessary.
  - Add dist tag
  - Change PreReq to correct Requires(pre), Requires(post), Requires(preun) 
  - Don't use RPM_SOURCE_DIR, reference the source file directly
  - Do the compiling (make) in %build, not %install
  - Don't replace /etc/screenrc if the user has modified it
  - Ditto /etc/pam.d/screen
  - Change the buildroot to follow guidelines


author: Petr Rockai <prockai@redhat.com> - 4.0.2-15
changelog:
  - bump MAXSTR (string buffer size) to 4k (from 256 bytes), fixes
    status line issues with window list in status line and too many
    windows (and possibly other issues with long strings)


author: Petr Rockai <prockai@redhat.com> - 4.0.2-14
changelog:
  - put /usr/share/screen into the package (so the package owns the
    directory as well, not only the files below); fixes BR 192852


author: Petr Rockai <prockai@redhat.com> - 4.0.2-11
changelog:
  - change the default lockscreen shortcut to ^aX to make
    it harder to hit by accident, as per BR 157821


author: Petr Rockai <prockai@redhat.com> - 4.0.2-6
changelog:
  - fix BR 136234 by carrying out the suggested change in /etc/screenrc
  - drop screen-4.0.2-logname.patch (merged into screen-4.0.2-screenrc.patch)
  - grant wish 130674 by adding a (commented out) caption statement to default
    screenrc


author: Lon Hohberger <lhh@redhat.com> 4.0.1-1
changelog:
  - Import of 4.0.1 from upstream.
  - Removed screen-homedir hack introduced in 3.9.15-8.  (I
  was unable to reproduce the behavior described in #98320,
  and thus, the patch isn't necessary.)
  - Fix for buffer overflow from Timo Strainen (patch 7).
  - Fix for #111084 - we now require texinfo to build.
  - Comment out lines in screenrc causing screen to complain
  at startup.


author: Lon Hohberger <lhh@redhat.com> 3.9.15-8
changelog:
  - Change screen's behavior to do the following: Attempt to use
  ~/.screen as the screen directory.  Failing that (ie, on files
  systems without Unix sockets support), try using /tmp/screen-<USER>.
  This prevents a user from creating /tmp/screens (which inherits
  the sticky bit from /tmp, preventing other users from using screen),
  as well as *tries* to be more secure.


author: Lon Hohberger <lhh@redhat.com> 3.9.15-6
changelog:
  - Disable system-wide read/write dir in /tmp; use user's ~/.screen
  directory for screen sessions. (#98320)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 3.9.11
  - patch0/patch4 is not necessary anymore
  - do not compress man-pages/info-files in spec file
  - use configure to set telnet/screenrc instead of sed
  - add a hack to correctly install the new screenencodings
  - try to build up a better global /etc/screenrc instead of
    /etc/skel/.screenrc


author: Crutcher Dunnavant <crutcher@redhat.com> 3.9.9-3
changelog:
  - fixed screenrc path sed command; #50046
  - added ncurses-devel build dep; #49692
  - fix typo in specfile that broke screenrc, #49535


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Patched the documentation to change the 'C-a C-\' to 'C-a \',
  - which is what is the real behaviour. this fixes bug #16103


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Stuck an entry into the default screenrc file that forces
  - '^?' (backspace) to send '^H'.
  - Its an ugly fix for a termcap inheritance problem,
  - but it works, if anyone REALLY needs '^?' they can change it,
  - and I think we anger less people with this than the way it 
  - currently behaves. (Read: vi and emacs work now)
  - POST NOTE (Aug 15): emacs is NOT happy with ^H, BUT screen thinks
  - that this is what backspace is supposed to do, so we don't change it.


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - got a patch from rzm@icm.edu.pl to fix bug #10353
  - which caused screen to crash when copying to a file buffer


author: Matthew Barnes <mbarnes@redhat.com> - 0.3.14-7
changelog:
  - Clean up spec file, package .bz2 file instead of .gz.
  - Make intltool a BuildRequires instead of a Requires (RH bug #203606).


author: Havoc Pennington <hp@redhat.com> 0.3.11-6
changelog:
  - remove the warning on invalid OMF files, it's always just some
    broken translation and happens with every release


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.9-1
changelog:
  - make relations optional to comply with the online copy of the OMF 1.0 spec
    at http://www.ibiblio.org/osrt/omf/omf_elements (SF #568355)
  - 0.3.9


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 0.3.8
  - no .la files
  - add some missing stuff to file list
  - divert output of rebuilddb to scrollkeeper.log


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild in new environment
  - ignore errors on removal of share/scrollkeeper/Templates in pre, #59494


author: Alex Larsson <alexl@redhat.com> 0.3.4-2
changelog:
  - Moved /usr/lib/rpm/redhat/find-lang.sh /var/tmp/scrollkeeper-0.3.14-root to %install
  - Updated docbook dependency to docbook-dtds


author: Alex Larsson <alexl@redhat.com> 0.3.4-2
changelog:
  - Updated to 0.3.4 from upstream. Updated parts of
  - the specfile from the current upstream version.


author: Dan Mueth <dan@eazel.com>
changelog:
  - Added %postun to remove $datadir/scrollkeeper/templates
    to compensate for breakage in upgrade from 0.1.1 to 0.1.2


author: Dan Mueth <dan@eazel.com>
changelog:
  - Added cleaner symbolic link section suggested by Karl 
    Eichwalder <keichwa@users.sourceforge.net>
  - Have it blow away the database dir on first install, just
    in case an old tarball version had been installed
  - Fixing the Source0 line at the top


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 4.1.5-7
changelog:
  - Fix multilib regression (non-equal 32/64bit content) by touching
    the generated sedfaq.txt.gz file with an exact timestamp


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 4.1.5-6
changelog:
  - Fix regression in handling of relative symlinks
    Resolves: #490473
  - Fix multibyte characters syntax error and possible infinite loop
    Resolves: #527427


author: Petr Machata <pmachata@redhat.com> - 4.1.5-4
changelog:
  - remove superfluous multibyte processing in str_append for UTF-8
    encoding (thanks Paolo Bonzini, #177246)


author: Petr Machata <pmachata@redhat.com> - 4.1.5-2
changelog:
  - #185374:
    - Follow symlinks before rename (avoid symlink overwrite)
    - Add -c flag for copy instead of rename (avoid ownership change)


author: Jakub Jelinek <jakub@redhat.com> 4.0.8-3
changelog:
  - if not -n, print current buffer after N command on the last line
    unless POSIXLY_CORRECT (#112952)
  - adjust XFAIL_TESTS for the improved glibc regex implementation
    (#112642)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 4.0.7
  - use "--without-included-regex"
  - do not gzip info pages in spec file, "TODO" is not present anymore


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-324
changelog:
  - More fixes for mcelog and MLS policy
  Resolves:#709370
  - Make cron jobs working in MLS
  Resolves:#769204
  - Add labeling for /var/cache/krb5rcache/


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-320
changelog:
  - Allow sssd to manage sssd lib lnk file
  Resolves:#754121
  - Allow postfix_smtpd to connect to milter


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-318
changelog:
  - Backport zarafa policy
  Resolves: #720462
  - Backport rhsmcertd policy
  - Allow rgmanager to run init script in initrc_t
  - Allow rsyslogd to read /usr/share/snmp/mibs/.index
  - Backport milter fixes


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-317
changelog:
  - Backport RHEL6 changes 
  	* Add dhcpc_exec_iptables boolean
  	* Add labeling for passwd.adjunct
  	* Allow domain transition from sysadm_t to passwd_t 
  	* Allow swat write to samba logs 
  	* Fixes for rgmanager
  	* Allow procmail to execute hostname
  	* MLS fixes


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-312
changelog:
  - Allow confined users to remove ssh home directory
  - Add support for iprinit, iprdump and iprupdate


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-306
changelog:
  - Add MLS fixes
  - Fix thunderbird.if interface
  - Allow pyzor to read pyzor config
  - Allow vsftpd kill
  - Allow named to update logs in chroot 
  - Fix labeling for iptabes files
  - Fix auth_use_nsswitch interface to call sssd_stream_connect interface
  - Allow domains to search default_t directories
  - Dontaudit sys_module for netutils_t


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-304
changelog:
  - SSH_USE_STRONG_RNG is 1 which requires /dev/random.
  - Allow dnsmasq to read all tftp content
  - Allow openswan to enable coredump
  Resolves: #689960
  - Allow lvm setfscreate


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-301
changelog:
  - Make pyzor working with nfs home directories
  Resolves: #674689
  - Allow syslog setrlimit
  Resolves: #674452
  - Allow samba to create /etc/krb5.keytab
  Resolves: #672289
  - Allow samba to use utmp option
  Resolves: #667692
  - Allow clustat to bind on rpc ports
  Resolves: #651609


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-298
changelog:
  - Dontaudit iscsid sys_ptrace capability
  - Allow iscsid set the priority of kernel threads
  Resolves: #649691
  - Allow svirt sys_rawio and sys_admin capability using virt_use_sysfs boolean
  - Allow insmod send null signal to all domains
  - Dontaudit vbetool attemps to read or write to console
  - Allow consoletype to read and write init script unnamed pipes


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-291
changelog:
  - Fixes for rhcs policy
  - Allow winbind to connect to epmap port
  Resolves: #650141
  - Remove transition from unconfined to postfix-master


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-289
changelog:
  - Fixes for audisp-remote policy
  - Fix httpd_setrlimit boolean
  - Allow cups to manage printer spool lnk files
  Resolves: #646731


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-287
changelog:
  - Fixes for piranha-web policy
  Resolves: #584447
  - Make selinux-policy-base to provide version
  - Remove duplicate declaration for /etc/NetworkManager/dispatcher.d


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-286
changelog:
  - Add httpd_setrlimit boolean
  - Do not audit spamc attemps to read and write sendmail unix_stream_sockets
  Resolves: #637843


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-285
changelog:
  - Add home_bin_t type and allow procmail to execute it
  - Allow rpcd to set filesystem quotas of a filesystem with extended attributes
  Resolves: #621057
  - Add rpm_dontaudit_leaks code 
  - Make winbind_tmp_t as user tmp file
  Resolves: #598646
  - Fixes for rhcs policy


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-283
changelog:
  - Fix fptd_man page
  Resolves: #625498
  - Add support for newer HPLIP package
  Resolves: #626858
  - Allow pptp to read meminfo
  Resolves: #551380


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-281
changelog:
  - Add piranha policy
  - Fixes for rhcs policy
  Resolves: #588902
  - Add support for MSSQL
  Resolves: #570481
  - Fixes for BIND
  Resolves: #578187
  - Allow xm to read virt config link files
  Resolves: #579497
  - Fixes for ipsec policy
  Resolves: #591975
  - Allow postfix-smtpd sys_chroot capability
  Resolves: #592752
  - Allow rsyslogd to read random device
  Resolves: #593139
  - Fix label for /var/net-snmp directory
  - Fix label for oddjob
  - Allow apache to use mod_auth_pam via winbind
  Resolves: #579105


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-274
changelog:
  - Fix label for cluster ocf-shellfuncs
  - Add slapd_initrc_exec_t type
  - Fix fenced policy
  Resolves: #522158


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-273
changelog:
  - Allow samba domains to manage authentication cache
  Resolves: #507797
  - Add label for chrooted named log file
  Resolves: #562833


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-271
changelog:
  - Allow qemu to read from random number generator
  Resolves: #552763
  - Add label for /sbin/mke4fs
  Resolves: #532565
  - Add dhcpc ability to relabel net_conf_t files
  Resolves: #559355
  - Add iscsid fixes
  Resolves: #548599
  - Add new type for cups interface scripts
  Resolves: #550015


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-270
changelog:
  - Allow prelink to load and execute functions from shared libraries
  Resolves: #551664
  - Add label for /etc/xen directory
  Resolves: #554777


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-268
changelog:
  - Fix labels for postgrestgres test suite 
  Resolves: #551063
  - Fix multiple different specifications for /var/vdsm directory
  Resolves: #549492


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-267
changelog:
  - Add rgmanager fixes
  - Allow setkey to read sysadm tmp files 
  Resolves: #515687
  - Allow fsdaemon to write to SCSI generic device
  Resolves: #547387
  - Add attribute configfile and allow init script to read configfile
  Resolves: #546604


author: Miroslav Grepl <mgrepl@redhat.com> 2.4.6-264
changelog:
  - Allow spamassassin to read /var/lib/spamassassin/ directory
  Resolves: #530750
  - Add rule to allow send/recv unlabeled packet to kernel.if
  Resolves: #530809
  - Add labeling for /sbin/e4fsck
  Resolves: #532565


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-263
changelog:
  - Fix strict policy to build with rgmanager policy
  - Fix policy to set the UNKNOWN=allow flag on Real Time Kernel
  Resolves: #531230


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-260
changelog:
  - Add clogd and other cluster patches from miroslav
  - Allow hplip_t to r/w cupsd_t socket
  Resolves: #483395
  - Allow ssh_keygen_t to write to /root/.ssh directory
  Resolves: #492519
  - Add Red Hat Cluster Policy
  Resolves: #503141
  Resolves: #522158
  - Allow sysadm_t to transition to setkey_t
  Resolves: #513447


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-258
changelog:
  - remove /usr/bin/env from poligygentool
  - Allow cyrus to communicate with snmp via stream socket
  Resolves: #523548


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-256
changelog:
  - Fix labeling on oracle libraries
  Resolves: #516780
  Resolves: #515491
  Resolves: #515687
  Resolves: #500400


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-254
changelog:
  - Add ipsec_match_default_spd back into userdomain
  - Allow sysadm_t to execute setkey and racoon executables
  - Dontaudit write of logwatch to etc_t
  - Allow samba as domain controller to change passwords
  Resolves: #475562


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-252
changelog:
  - Change mmap_low boolean to effect unconfined_t
  - Allow ipsec_t to read its init script
  Resolves: #511359


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-247
changelog:
  - Additional privs for privoxy, kpropd found in other dists
  - iscsi wants to look at the process state of all domains
  Resolves: #506057


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-246
changelog:
  - Allow semanage_t to transition to initrc_t in order to restart mcstrans
  Resolves: #460970
  - Additional rules for ipsec
  Resolves: #443646


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-242
changelog:
  - Allow all domains to search  bin_t and sbin_t
  - Allow qemu to write to /var/run/svirt/qemu
  Resolves: #499701


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-233
changelog:
  - Add rsync_client for Fedora Infrastructure
  - Allow spamd to exec itself when it gets a hup signal
  Resolves: #499701


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-232
changelog:
  - Allow spamd to exec itself when it gets a hup signal
  - Add Minimum policy for Ovirt to RHEL5
  Resolves: #499701


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-230
changelog:
  - Allow amanda to signal fsadm
  - Add context for /var/cache/cgit
  - Dontaudit apache leaked tcp_sockets
  - Fixes for cvs service
  -allow initrc_t and inetd_t siginh over their children
  - add privoxy_connect_any boolean
  - Allow smbd_t to signal nmbd_t
  Resolves: #498596


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-229
changelog:
  - Fix sepolgen error regression
  - Fix milter implementaion 
  - Additional rules required for update to automount
  Resolves: #497273


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-227
changelog:
  - Allow nfs to share removable devices
  - Allow ipsec additional privs for FIPS compliance
  Resolves: #497168


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-225
changelog:
  - add context for rpc.quoatad
  - Allow spamassassin to append to user_home_t for log files
    Resolves: #481387
  Resolves: #486187


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-222
changelog:
  - Allow spamc to append to user_home_t
  Resolves: #486187
  - Allow dbus to send message back to all services
  Resolves: #481628


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-217
changelog:
  - Allow saslauthd access to kerberos host rcache
  - Allow dbus to read all domains states
  Resolves: #489899


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-213
changelog:
  - Allow postfix_virtual_t to use private steam sock_file
  - Fix java shared library in IBM package
  Resolves: #486608


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-211
changelog:
  - Allow samba to edit apache files in home dir
  Resolves: #485111
  - Allow procmail to transition to spamassassin domains
  Resolves: #485107


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-208
changelog:
  - Allow samba to manage ALL files in home dir if boolean set
  - Fix typos in man pages
  Resolves: #477123


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-200
changelog:
  - Allow ldap to connect to sasl
  - avc denials during samba active directory join
  Resolves: #474852
  - samba - winbind - periodic avc denials
  Resolves: #474854
  - "Syntax error on line 1 ' [type=SQUOTE]" upgrading selinux-policy-devel
  Resolves: #474868
  - missing policy
  Resolves: #475273


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-199
changelog:
  - Allow apps that check password to write to faillog  
  audisp_remote needs to bind to audit ports
  Resolves: #474481
  - Allow xm to stream connect to virt
  Resolves: #472903


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-197
changelog:
  - Dontaudit search of /root for init daemons
  - Fixes for ricci
  - Allow xm to manage virt_image_t
  Resolves: #472903


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-188
changelog:
  - Fixes for Fedora Infrastructure
  - Make pegasus an unconfined_domain 
  - Add pki policy
  Resolves: #440151


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-182
changelog:
  - Change apache httpd_use_nfs to mean managing nfs shares
  - From Fedora Infrastructure
  Resolves: #469943


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-179
changelog:
  - Allow restorecon to read locale_t
  Resolves: #469402
  - Allow hal/pm-utils to look at /var/run/video.rom


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-164
changelog:
  - Fix labeling on dhclient-lease files
  - Allow portmap_helper to bind to rpc ports
  Resolves: #451805


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-162
changelog:
  - Allow domains to read etc_runtime for access to modified denyhosts
  - Allow dhcpc_t to list dbusd_etc_t directory
  Resolves: #459888


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-155
changelog:
  - Complete backport of logging/audit policy
  - Allow pegasus to look at kernel xen information
  Resolves: #461624


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-154
changelog:
  - Allow portmak to read kernel state 
  - Allow ricci to figure out if cluster services are running
  Resolve: #461769


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-149
changelog:
  - Fix file context to install on strict/mls policy
  - Allow hal to modify input device
  Resolves: #442623


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-142
changelog:
  - add mmap_low boolean
  - Upgrade to latest networkmanager policy
  - Add kpropd policy
  - update nscd policy
  - Update ntp policy
  - Update openvpn policy
  - Fix ppp_read_read interface
  - fix portmapper to allow it to connect to all <1024 ports
  - Fix ricci_modstorage to be able to start clvmd
  Resolves: #442028
  Resolves: #447014
  Resolves: #455784


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-138
changelog:
  - Allow pam_console to setattr on cpu_device_t
  Resolves: #447403
  - selinux-policy support for virtio block devices
  Resolves: #446229


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-134
changelog:
  - Allow kerberos daemons to create log files
  - Resolves: 442981
  - Fix label on /usr/libexec/hal_lpadmin
  Resolves: #442951


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-124
changelog:
  - Fix deletion of dovecot files in strict/mls policy Resolves 434843
  - Allow hal to setsched on kernel
  Resolves: #435197


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-117
changelog:
  - Allow mailman to signal itself
  Resolves: #430639
  - Allow iscsid to setrlimit 
  Resolves: #430669
  - Additional fix to allow setroubleshoot to talk to dbus
  Resolves: #224351


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-114
changelog:
  - Allow restorecond to read homedir sym links
  - Allow mailservers/postfix to use nfs file systems
  Resolves: #245605


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-108
changelog:
  - Allow kudzu to domtrans to unconfined_t
  - Allow audit to send mail
  - Allow mailman and postfix to interact
  Resolves: #425806:


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-107
changelog:
  - Remove badly labeled pegasus directory
  - Allow postfix to work with NFS homedirs
  - Allow iptables to connect to ldap
  - Allow apache scripts to run nice
  - Allow ntpd to use /dev/ptmx for setting the time
  - Allow automount to read /dev/random
  - Allow samba to use kerberos
  - Allow squid to access to port 2048
  - Allow amanda to talk to ldap
  - Allow yppasswd to run pwupdate
  - Allow automount to mount squashfs
  - Add new nscd permissions
  - 
  Resolves: #245605
  Resolves: #248838
  Resolves: #251841
  Resolves: #253999
  Resolves: #316011
  Resolves: #326631
  Resolves: #350511
  Resolves: #366461
  Resolves: #390771
  Resolves: #247814
  Resolves: #238347
  Resolves: #351051
  Resolves: #254199
  Resolves: #288771
  Resolves: #294671
  Resolves: #317281
  Resolves: #340311
  Resolves: #340321
  Resolves: #386481
  Resolves: #327121
  Resolves: #416541
  Resolves: #416561
  Resolves: #414891

  Resolves: 383231
  Resolves: 254197
  Resolves: 266341
  Resolves: 248835
  Resolves: 326721
  Resolves: 319791
  Resolves: 359701
  Resolves: 374431
  Resolves: 403241
  Resolves: 251712
  Resolves: 283971
  Resolves: 284361
  Resolves: 300391
  Resolves: 339651
  Resolves: 383191
  Resolves: 279261


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-106.1
changelog:
  - dontaudit consoletype talking to hotplug
  - allow hotplug to signal ifconfig
  Resolves: 328211
  Resolves: 328251


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-97
changelog:
  - Fixup clmvd to allow creation of fixed devices
  - Fixes telnet/rlogin using replay cache
  Resolves: #284831


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-89
changelog:
  - Allow postfix to read master proc info
  - Allow unix_update to talk to nsswitch
  - Allow dmidecode to search sysfs_t
  Resolves: #263141


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-88
changelog:
  - Fix relabel of /var/run dir
  - Allow snmp to read any directory
  - Allow cimserver to create pegasus_data directories
  Resolves: #213809
  - Change to context on /var/run/libvirt
  Resolves: #249069


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-84
changelog:
  - Allow dovecot read of /tmp files for kerberos
  - Fix apache policy for virtual hosting
  - Allow Xen to run on nfs
  Resolves: #253744


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-76
changelog:
  - Allow xenconsole to manage xen log files
  - add mmap_zero for new kernel
  - Fixes for RHEL5
  Resolves:#244690


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-74
changelog:
  - Fix location of ypxfr on 64 bit platforms
  - Fixes for nagios, postfix, procmail, saslauthd, arpwatch, avahi, dovecot
  Resolves: #241621


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-71
changelog:
  - Allow netlable to read etc and work with init terminals
  - Change file context to have all of policy at SystemLow
  Resolves: #239079


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-67
changelog:
  - Allow logging into the console on s390
  Resolves: #237703
  - Additional avc's caused by change in unix_update
  Resolves: #236316


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-61
changelog:
  - Fix admin_domain_template to allow custom user types
  Resolves: #237133
  -Allow lvm to create/delete generic device_t direcories/files under /dev 
  Resolves: #237128


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-52
changelog:
  - Allow netutils to read sysfs
  Resolves: #235357
  - Allow samba to work as a PDC
  Resolves: #235360
  - Allow ypserv to bind to ports 600-1024
  Resolves: #235363
  - Fix kudzu to be able to telinit
  Resolves: #225443


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-50
changelog:
  - More work to allow kudzu to setup init correctly so getty will work
  Resolves: #225443
  - Allow pegasus to execute ifconfig
  Resolves: #227485
  - Allow Aide to look at lnk_files and other fixes
  Resolves: #234885
  - querying cups jobs with sysadm_r needs override mls restrictions
  Resolves: #234889


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-49
changelog:
  - Change init_daemon_domain(netlabel_mgmt_t,netlabel_mgmt_exec_t)
  - to init_system_domain(netlabel_mgmt_t,netlabel_mgmt_exec_t)
  Resolves: #233313


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-47
changelog:
  - Allow sysadm_r to transition to netlabel_mgmt
  Resolves: #233313
  - Allow kudzu to setup init correctly so getty will work
  Resolves: #225443


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-42
changelog:
  - Dontaudit restorecon writing to cron pipes
  - Fix filespec for /dev/ub*
  - Allow ftp and telnet to use kerberos key files
  - Allow syslog to use alternate ports
  - Allow radious to look at the routing table
  - Allow pyzor to getattr on autofs


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-39
changelog:
  - Add bugzilla policy
  - Allow procmail to create tmp files so spamassisin will work
  - Some fixes for pyzor


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-36
changelog:
  - Allow xen to work properly on ia64, needs to be able to read dosfs_t
  Resolves: #217362
  - Allow mozilla, evolution and thunderbird to read dev_random.
  Resolves: FC6-227002
  - Allow spamd to connect to smtp port
  Resolves: FC6-227184
  - Fixes to make ypxfr work
  Resolves: FC6-227237
  - Allow audit fsetsid capability
  Resolves: FC6-227423
  - Allow syslog (syslog-ng) to tcp_connect to other syslog servers
  Resolves: FC6-218978


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-31
changelog:
  - Fix clvmd policy
  - Fix squid cgi script to run with correct context.
  - Maintain proper context on /etc/lvm/.cache file
  - Lots of fixes for ricci and friends
  - mount.nfs needs sys_resource
  - Change gstreamer context for only i386
  - Fix libXcomp file_context
  Resolves: #224441


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-28
changelog:
  - Allow logwatch to use ypbind
  - Allow system_crond_t to create cron_var_run_t files (prelink files)
  - dontaudit postfix-smtp reading /boot, fix file context on lmtp
  Resolves: #215722


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-27
changelog:
  - Fix senmail avc trying to read /root
  - More fixes for ssh transitions to userspace
  Resolves: #221608
  Resolves: #222548


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-26
changelog:
  - automounter needs setuid
  - prelink needs to be able to rw_dir_perms on usr_t
  - pcscd_t needs to be able to search sysfs_t
  - Lots of fixes to run sshd under xinetd
  Resolves: #219999


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-24
changelog:
  - Allow prelink when run from rpm to create tmp files
  Resolves: #221865
  - Remove file_context for exportfs
  Resolves: #221181
  - Allow spamassassin to create ~/.spamassissin
  Resolves: #203290
  - Allow netlabel packets to flow.
  Resolves: #210426


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-23
changelog:
  - Allow ssh access to the krb tickets
  - Allow sshd to change passwd
  - Stop newrole -l from working on non securetty
  Resolves: #200110


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-16
changelog:
  - Allow semanage to exec it self.  Label genhomedircon as semanage_exec_t
  Resolves: #219421
  - Allow sysadm_lpr_t to manage other print spool jobs
  Resolves: #220080


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-3
changelog:
  - Allow login programs to polyinstatiate homedirs
  Resolves: #216184
  - Allow quotacheck to create database files
  Resolves: #212957


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-1
changelog:
  - Dontaudit appending hal_var_lib files 
  Resolves: #217452
  Resolves: #217571
  Resolves: #217611
  Resolves: #217640
  Resolves: #217725


author: James Antill <james.antill@redhat.com> 2.4.2-6
changelog:
  - Fix policygentool specfile problem.
  - Allow apache to send signals to it's logging helpers.
  - Resolves: rhbz#212731


author: Dan Walsh <dwalsh@redhat.com> 2.3.16-9
changelog:
  - Remove bluetooth-helper transition
  - Add selinux_validate for semanage
  - Require new version of libsemanage


author: Dan Walsh <dwalsh@redhat.com> 2.3.9-4
changelog:
  - Set /usr/lib/ia32el/ia32x_loader to unconfined_execmem_exec_t for ia32 platform
  - Fix spec for /dev/adsp


author: Dan Walsh <dwalsh@redhat.com> 2.3.6-4
changelog:
  - Change allow_execstack to default to on, for RHEL5 Beta.  
    This is required because of a Java compiler problem.
    Hope to turn off for next beta


author: Dan Walsh <dwalsh@redhat.com> 2.3.3-11
changelog:
  - Added Paul Howarth patch to only load policy packages shipped 
    with this package
  - Allow pidof from initrc to ptrace higher level domains
  - Allow firstboot to communicate with hal via dbus


author: Dan Walsh <dwalsh@redhat.com> 2.3.3-3
changelog:
  - Allow prelink to read bin_t symlink
  - allow xfs to read random devices
  - Change gfs to support xattr


author: Dan Walsh <dwalsh@redhat.com> 2.2.32-2
changelog:
  - Add unconfined_mount_t
  - Allow privoxy to connect to httpd_cache
  - fix cups labeleing on /var/cache/cups


author: Dan Walsh <dwalsh@redhat.com> 2.2.29-6
changelog:
  - Allow secadm_t ability to relabel all files
  - Allow ftp to search xferlog_t directories
  - Allow mysql to communicate with ldap
  - Allow rsync to bind to rsync_port_t


author: Russell Coker <rcoker@redhat.com> 2.2.29-5
changelog:
  - Fixed mailman with Postfix #183928
  - Allowed semanage to create file_context files.
  - Allowed amanda_t to access inetd_t TCP sockets and allowed amanda_recover_t
    to bind to reserved ports.  #149030
  - Don't allow devpts_t to be associated with tmp_t.
  - Allow hald_t to stat all mountpoints.
  - Added boolean samba_share_nfs to allow smbd_t full access to NFS mounts.
    - Make mount run in mount_t domain from unconfined_t to prevent mislabeling of
    /etc/mtab.
  - Changed the file_contexts to not have a regex before the first ^/[a-z]/
    whenever possible, makes restorecon slightly faster.
  - Correct the label of /etc/named.caching-nameserver.conf
  - Now label /usr/src/kernels/.+/lib(/.*)? as usr_t instead of
    /usr/src(/.*)?/lib(/.*)? - I don't think we need anything else under /usr/src
    hit by this.
  - Granted xen access to /boot, allowed mounting on xend_var_lib_t, and allowed
    xenstored_t rw access to the xen device node.


author: Dan Walsh <dwalsh@redhat.com> 2.2.29-2
changelog:
  - Add mono dbus support
  - Lots of file_context fixes for textrel_shlib_t in FC5
  - Turn off execmem auditallow since they are filling log files


author: Dan Walsh <dwalsh@redhat.com> 2.2.23-17
changelog:
  - MLS Fixes
  	dmidecode needs mls_file_read_up
  - add ypxfr_t
  - run init needs access to nscd
  - udev needs setuid
  - another xen log file
  - Dontaudit mount getattr proc_kcore_t


author: Dan Walsh <dwalsh@redhat.com> 2.2.23-8
changelog:
  - Blkid changes
  - Allow udev access to usb_device_t
  - Fix post script to create targeted policy config file


author: Dan Walsh <dwalsh@redhat.com> 2.2.20-1
changelog:
  - Fix load_policy to work on MLS
  - Fix cron_rw_system_pipes for postfix_postdrop_t
  - Allow audotmount to run showmount


author: Dan Walsh <dwalsh@redhat.com> 2.2.19-2
changelog:
  - Fix swapon
  - allow httpd_sys_script_t to be entered via a shell
  - Allow httpd_sys_script_t to read eventpolfs


author: Dan Walsh <dwalsh@redhat.com> 2.2.2-1
changelog:
  - Update to upstream
  - Turn off execheap execstack for unconfined users
  - Add mono/wine policy to allow execheap and execstack for them
  - Add execheap for Xdm policy


author: Dan Walsh <dwalsh@redhat.com> 2.1.12-3
changelog:
  - Fix for procmail/spamassasin
  - Update to upstream
  - Add rules to allow rpcd to work with unlabeled_networks.


author: Dan Walsh <dwalsh@redhat.com> 2.1.6-13
changelog:
  - Add dri libs to textrel_shlib_t
  - Add system_r role for java
  - Add unconfined_exec_t for vncserver
  - Allow slapd to use kerberos


author: Dan Walsh <dwalsh@redhat.com> 2.1.3-1
changelog:
  - Turn back on execmem since we need it for java, firefox, ooffice
  - Allow gpm to stream socket to itself


author: Jeremy Katz <katzj@redhat.com> - 2.1.2-3
changelog:
  - fix requirements to be on the actual packages so that policy can get
    created properly at install time


author: Dan Walsh <dwalsh@redhat.com> 2.1.2-1
changelog:
  - Update to upstream 
  - Turn off allow_execmem and allow_execmod booleans
  - Add tcpd and automount policies


author: Dan Walsh <dwalsh@redhat.com> 2.1.1-3
changelog:
  - Add two new httpd booleans, turned off by default
  	* httpd_can_network_relay
  	* httpd_can_network_connect_db


author: Miroslav Lichvar <mlichvar@redhat.com> 8.13.8-6.el5
changelog:
  - fix verification of SSL certificate with NUL in name (#553618, CVE-2009-4565)
  - do not accept localhost.localdomain as valid address from smtp (#449391)
  - skip colon separator when parsing service name in ServiceSwitchFile (#512871)
  - exit with non-zero error code when free space is low (#299951)
  - fix -qG description in man page (#250552)
  - fix comments in sendmail.mc to use correct certs path (#244012)
  - add MTA to provides (#494408)
  - fix %dist macro use (#440616)
  - compile with -fno-strict-aliasing
  - skip t-sem test as it doesn't allow parallel testing


author: Thomas Woerner <twoerner@redhat.com> 8.13.7-3
changelog:
  - using new syntax for access database (#177566)
  - fixed failure message while shutting down sm-client (#119429)
    resolution: stop sm-client before sendmail
  - fixed method to specify persistent queue runners (#126760)
  - removed patch backup files from sendmail-cf tree (#152955)
  - fixed missing dnl on SMART_HOST define (#166680)
  - fixed wrong location of aliases and aliases.db file in aliases man page
    (#166744)
  - enabled CipherList config option for sendmail (#172352)
  - added user chowns for /etc/mail/authinfo.db and move check for cf files
    (#184341)
  - fixed Makefile of vacation (#191396)
    vacation is not included in this sendmail package
  - /var/log/mail now belongs to sendmail (#192850)


author: Thomas Woerner <twoerner@redhat.com> 8.13.7-1
changelog:
  - new version 8.13.7 (#195282)
  - fixes CVE-2006-1173 (VU#146718): possible denial of service issue caused by
    malformed multipart messages (#195776)


author: Thomas Woerner <twoerner@redhat.com> 8.13.5-3
changelog:
  - fixed selinuxenabled path in initscript
  - fixed error handling with sigwait (#137709)
    Thanks to Jonathan Kamens for the patch
  - fixed prereq for cyrus-sasl: now using /usr/sbin/saslauthd
  - appended 'dnl' to cert tags in sendmail.mc


author: Thomas Woerner <twoerner@redhat.com> 8.13.4-1
changelog:
  - new version 8.13.4
  - added requires for the sendmail base package in sendmail-cf, sendmail-devel
    and sendmail-doc
  - dropped upstream close_wait.p2 patch


author: Thomas Woerner <twoerner@redhat.com> 8.13.3-1.1
changelog:
  - fixed gcc4 build: use double quotes for confOPTIMIZE to avoid m4 confusion
    with ','
  - fix for ppc: using tripple-quotes


author: Thomas Woerner <twoerner@redhat.com> 8.13.0-1.1
changelog:
  - fixed init script to not complain missing sendmail-cf package (#126975)
  - better message in /etc/mail/Makefile for missing sendmail-cf package.


author: Thomas Woerner <twoerner@redhat.com> 8.13.0-1
changelog:
  - new version 8.13.0
  - made /etc/mail/Makefile complain missing sendmail-cf package (#123348)
  - fixed ownership of %{_includedir}/libmilter (#73977)
  - moved back to /usr/share/ssl/certs as certificate directory (see sendmail.mc)
  - extended sendmail.mc for spam protection


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-4.1
changelog:
  - added authinfo to possible sendmail maps: /etc/mail/Makefile (#119010)
  - fixed minor version in changelog


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-3
changelog:
  - RH3.0E version: sasl1, no pie, old_setup (provide /etc/aliases)
  - new switches for pie and old_setup


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-2
changelog:
  - added information for saslauthd and AUTH (#113463)
  - fixed STATUS_FILE in sendmail-redhat.mc (#114302)
  - reset mta after update if mta was sendmail (#114257)
  - enabled pie for ia64 again


author: Thomas Woerner <twoerner@redhat.com> 8.12.11-1.2
changelog:
  - /usr/lib/sendmail is in alternatives, now
  - removed trailing / from stdir
  - fixed define for STATUS_FILE


author: Thomas Woerner <twoerner@redhat.com> 8.12.10-6
changelog:
  - reverted to sasl1 for 3.0E: added with_sasl1
  - spec file cleanup
  - new location for statistics file (/var/log/)


author: Karsten Hopp <karsten@redhat.de> 8.12.10-3
changelog:
  - fix usage of RPM_OPT_FLAGS variable in spec file
  - add makecert.sh script to -doc subpackage
  - add cert paths to sendmail.mc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - move debug information from sendmail into debuginfo rpm
  - on %post make sure /etc/aliases.db and /etc/mail/*.db is correctly
    owned by root
  - do not set confTRUSTED_USER to smmsp in sendmail-redhat.mc


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - run "make -C /etc/mail" (maybe generating new sendmail.cf, then newaliases
  - added $SENDMAIL_OPTARG that could be set by /etc/sysconfig/sendmail #99224


author: Nalin Dahyabhai <nalin@redhat.com> 8.12.9-6
changelog:
  - move Sendmail.conf from /usr/lib/sasl to /usr/lib/sasl2 and change the
    default pwcheck method to "saslauthd"


author: Nalin Dahyabhai <nalin@redhat.com> 8.12.9-5
changelog:
  - configure to use libsasl2 instead of libsasl to avoid linking with both
    (we also link to libldap, which now uses libsasl2)
  - link with -ldb instead of -ldb-4.0 on all releases after RHL 7.3 instead
    of just 7.3 (all versions of db4-devel thereafter are expected to provide
    the right linking setup)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - mark /etc/mail/Makefile as config(noreplace) #87688
  - mark /etc/pam.d/smtp as config(noreplace) #87731


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - call make with the target "all" #86005
  - add start/stop/restart as Makefile targets
  - add another security patch


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add correct db4-devel requirements for newer releases
  - completely re-do many ifdef code in the spec-file
  - fix some issues building for older RHL releases


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add a confTRUSTED_USER line into sendmail.mc, submit.mc is already ok
  - add patch from sendmail.org for cf/m4/proto.m4


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - do not reject all numeric login names if hesiod support is
    compiled in.   #80060
  - remove reference to non-existing man-pages #74552


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - sendmail-8.12.7-etrn.patch from Jos Vos <jos@xos.nl>
  - submit.mc: enable "use_ct_file" by default  #80519
  - add _FFR_MILTER_ROOT_UNSAFE  #78223


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add openssl-devel as a build-time requirement
  - preprocess the config file to add the right version of %{_lib}
  - add kerberos -I and -L flags to build configuration, needed for newer
    versions of libssl


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - always have a queue run interval for sm-msp-queue   #81424
  - Jos Vos suggests adding another variable for sm-client queue-run


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add the following changes from Adrian Havill <havill@redhat.com>
    to our default sendmail.mc file:
  	- added commented-out-by-default common AUTH/SSL examples
  	- updated m4 example and rpm reference
  	- added more comment documentation
  	- add commented out confAUTO_REBUILD example
  	- improve description about MASQUERADE_AS


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add to submit.mc: define(`_MTA_HOST_', `[127.0.0.1]')
    to deliver directly to localhost IP instead of going through DNS
  - submit.mc: exchange msp and use_ct_file to better enable it
  - do not undefine UUCP_RELAY and BITNET_RELAY
  - sendmail.mc: use LOCAL_DOMAIN instead of "Cw" directly
  - sendmail.mc: add commented out MASQUERADE_AS example
  - re-enable DAEMON variable for now


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove absolute path names from the PAM configuration, allowing it to be
    used by any arch on a multilib system


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Changed the behaviour in /etc/mail/Makefile to generate the sendmail.cf and
    submit.cf from the mc files if they changed.
  - Added a small README.redhat that descibed the new mc file behaviour and the
    split into sendmail.cf and submit.cf.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - suggestions form Stephane Lentz:
  	- add correct include statement into submit.mc (like sendmail.mc)
  	- add commented out further suggestions into submit.mc
  	- disable ident lookups


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - make sure more version information is in the cf file #54418
  - do not use "-b" flag when patching in spec file
  - require newer chkconfig version #61035
  - fix preun script #60880
  - add TMPF to access file creation #60956


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - mv include files to /usr/include/libmilter/ #60795
  - do not use "-f" option to virtusertable #60196
  - ad an example smarthost entry to config file #58298


author: Nalin Dahyabhai <nalin@redhat.com> 8.12.2-1
changelog:
  - update to 8.12.2 (adds STARTTLS support without need for sfio)
  - don't forcibly strip binaries; let the build root handle it
  - add creation of the smmsp account (51/51) in %pre
  - enable hesiod map support
  - modify default config to use an MSP
  - comment out 'O AutoRebuildAliases' in %post, otherwise sendmail will
    fail to restart on upgrades


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - integrate ugly logic to compile this src.rpm also on older Red Hat
    Linux releases
  - clean up spec file and patches a bit
  - add db4 support


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - fix another path to correct docu
  - include sendmail/README in the docu
  - compile with -D_FFR_WORKAROUND_BROKEN_NAMESERVERS, but do not
    enable this at runtime
  - devel subpackage files owned by root now


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - change "-q" to "-s" as option to make #57216
  - move milter lib into separate "devel" sub-package
  - add include files to devel sub-package #56064
  - fix pointer in access file to docu #54351


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add libmilter docu
  - add support for userdb to /etc/mail/Makefile
  - use "btree" database files if a userdb is used
  - buildrequires tcp_wrappers


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 8.11.3
  - add "localhost.localdomain" to the list of hostnames accepted
    for local delivery "Cw" in /etc/mail/sendmail.mc
  - add patches from Pekka Savola <pekkas@netcore.fi>
  	- Enable IPv6 at compile time, patch for glibc 2.2 from PLD
  	- Add a commented-out IPv6 daemon .mc line to sendmail.mc
  	- buildrequire: openldap-devel, cyrus-sasl-devel


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add changes from Christopher McCrory <chrismcc@pricegrabber.com>:
  	- prepare /etc/mail/Makefile for more maps not shipped with this rpm
  	- changed sendmail.mc to include some more commented out options,
  	  so that people are directly pointed at important options
  	- add /etc/pam.d/smtp for AUTH
  	- add FEATURE(use_ct_file) and /etc/mail/trusted-users


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - enable daemon mode again, but only listen to the loopback device
    instead of all devices.
  - do not include check.tar with old anti-spam rules


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to (security release) 8.11.2
  - build also on RHL 6.x #16061
  - include smrsh man-page #17901
  - use the "-f" flag for makemap to preserve case for virtusertable
    and userdb in /etc/mail/Makefile - suggested by Harald Hoyer
  - fix /usr/doc -> usr/share/doc in docu #20611
  - wrong path in sendmail.mc #20691
  - tcp-wrapper support wasn't enabled correctly #21642
  - do not expose user "root" when masquerading like in older releases #21643
  - disable the VRFY and EXPN smtp commands #21801
  - disable queue-runs for normal users (restrictqrun privacy flag)
  - fix typo in sendmail.mc #21880, #22682
  - disable daemon mode to see what needs fixing


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - install man pages, not groff output (#3746).
  - use dnl not '#' in m4 comment (#3749).
  - add FEATURE(mailtertable) to the config -- example file needs this (#4649).
  - use db2 not db1.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fox the awk scripts in the postinstall
  - enable FEATURE(accept_unresolvable_domains) by default to make laptop
    users happy.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - make the redhat.mc be a separate source files. Sanitize patches that used
    to touch it.
  - install redhat.mc as /etc/sendmail.mc so that people can easily modify
    their sendmail.cf configurations.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - provide a more sane /etc/mail/access default config file
  - use makemap to initializa the empty databases, not touch
  - added a small, but helpful /etc/mail/Makefile


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Allow empty QUEUE in /etc/sysconfig/sendmail for those who
    want to run sendmail in daemon mode without processing the
    queue regularly.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - added chkconfig support
  - various spec file cleanups
  - changed group to Networking/Daemons (from Daemons).  Sure, it runs on
    non networked systems, but who really *needs* it then?


author: Donnie Barnes <djb@redhat.com>
changelog:
  - made /etc/mail/deny.db a ghost
  - removed preun that used to remove deny.db (ghost handles that now)
  - NOTE: upgrading from the sendmail packages in 4.8, 4.8.1, and possibly
    4.9 (all Red Hat betas between 4.2 and 5.0) could cause problems.  You
    may need to do a makemap in /etc/mail and a newaliases after upgrading
    from those packages.  Upgrading from 4.2 or prior should be fine.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - updated to 8.8.7
  - added some spam filtration
  - combined some makefile patches
  - added BuildRoot support


author: Jindrich Novy <jnovy@redhat.com> 1.9-1
changelog:
  - applied some features proposed by Mike Frysinger (#182219)
  - add mips arch support, add sparc32
  - Obsoletes sparc32
  - add '-h' option to display more comprehensive help
  - add linux64 helper


author: Jindrich Novy <jnovy@redhat.com> 1.8-1
changelog:
  - fix possible segfault when parsing unknown arguments (#161975)
  - print wanings when unknown arguments are passed
  - add FDPIC_FUNCPTRS personality


author: Dan Walsh <dwalsh@redhat.com> 2.3-1
changelog:
  - Update from upstream
    * apol:
  	added new MLS components tab for sensitivities, 
  	levels, and categories.
  	Changed users tab to support ranges and default 
  	levels.
  	added range transition tab for searching range
  	Transition rules.
  	added new tab for network context components.
  	added new tab for file system context components.
    * libapol:
  	added binpol support for MLS, network contexts, 
  	and file system contexts.
    * seinfo:
  	added command line options for MLS components.
  	added command line options for network contexts
  	and file system contexts.
    * sesearch:
  	added command line option for searching for rules
  	by conditional boolean name.
    * seaudit:
  	added new column in the log view for the 'comm' 
  	field found in auditd log files.
  	added filters for the 'comm' field and 'message'
  	field.
    * manpages:
  	added manpages for all tools.


author: Bill Nottingham <notting@redhat.com> 2.1.0-5
changelog:
  - put libraries in the right place (also puts debuginfo in the right
    package)
  - add %defattr for -devel too


author: Dan Walsh <dwalsh@redhat.com> 1.1-1
changelog:
  - Update to latest code from tresys
  - Break into three separate packages for cmdline, devel and gui
  - Incorporate the tcl patch


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-5
changelog:
  - Remove unneeded changes on QE request
  - Note: still includes fixes for these bugs:
  - Resolves: RHBZ #471169 (incorrent formatting of fcntl64() on32/64 system)
  - Resolves: RHBZ #472053 (SIGKILL might be improperly traced)
  - Resolves: RHBZ #478419 (Improve fairness)


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-4
changelog:
  - Restore ^C handling inadvertently disabled in fairness fix
  - Note: previous version (4.5.18-3) includes fixes for these bugs:
  - Resolves: RHBZ #471169 (incorrent formatting of fcntl64() on32/64 system)
  - Resolves: RHBZ #472053 (SIGKILL might be improperly traced)


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-3
changelog:
  - Partial sync up with upsteam #1: whitespace changes
  - Partial sync up with upsteam #2: trivial changes (comments etc)
  - Partial sync up with upsteam #3: flock reporting, fix network ops selection
  - Resolves: RHBZ #471169
  - Partial sync up with upsteam #4: support -D option, blackfin cpu support
  - Partial sync up with upsteam #5: update SIGKILL detection machinery
  - Resolves: RHBZ #472053
  - Improve fairness - do not allow a few threads to usurp strace's attention
  - Resolves: RHBZ #478419


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-2.el5.1
changelog:
  - Fix the case where we did not nicely report that traced process
    disappeared (SIGKILL etc) while we were examining its state.
  - Resolves: RHBZ #472053


author: Denys Vlasenko <dvlasenk@redhat.com> - 4.5.18-2
changelog:
  - Fix "strace -s N sets string size to N+1" problem (patch by Jeff Bastian)
  - Resolves: RHBZ #467776


author: Roland McGrath <roland@redhat.com> - 4.5.18-1
changelog:
  - build fix for newer kernel headers (#457291)
  - fix CLONE_VFORK handling (#455078)
  - Support new Linux/PPC system call subpage_prot and PROT_SAO flag.
  - In sigaction system call, display sa_flags value along with SIG_DFL/SIG_IGN.
  - Resolves: RHBZ #455874, RHBZ #452501, RHBZ #453438
  - Resolves: RHBZ #454431, RHBZ #455088, RHBZ #445849, RHBZ #435444


author: Roland McGrath <roland@redhat.com> - 4.5.17-1
changelog:
  - handle O_CLOEXEC, MSG_CMSG_CLOEXEC (#365781)
  - fix biarch stat64 decoding (#222275)
  - fix spurious "..." in printing of environment strings (#358241)
  - improve prctl decoding (#364401)
  - fix hang wait on exited child with exited child (#354261)
  - fix biarch fork/vfork (-f) tracing (#447475)
  - fix biarch printing of negative argument kill (#430585)
  - fix biarch decoding of error return values (#447587)
  - fix -f tracing of CLONE_VFORK (#455078)
  - fix ia64 register clobberation in -f tracing (#453438)
  - print SO_NODEFER, SA_RESETHAND instead of SA_NOMASK, SA_ONESHOT (#455821)
  - fix futex argument decoding (#448628, #448629)


author: Roland McGrath <roland@redhat.com> - 4.5.16-1
changelog:
  - fix multithread issues (#240962, #240961, #247907)
  - fix spurious SIGSTOP on early interrupt (#240986)
  - fix utime for biarch (#247185)
  - fix -u error message (#247170)
  - better futex syscall printing (##241467)
  - fix argv/envp printing with small -s settings, and for biarch
  - new syscalls: getcpu, eventfd, timerfd, signalfd, epoll_pwait,
    move_pages, utimensat


author: Roland McGrath <roland@redhat.com> - 4.5.15-1
changelog:
  - biarch fixes (#179740, #192193, #171626, #173050, #218433, #218043)
  - fix -ff -o behavior (#204950, #218435, #193808, #219423)
  - better quotactl printing (#118696)
  - *at, inotify*, pselect6, ppoll and unshare syscalls (#178633, #191275)
  - glibc-2.5 build fixes (#209856)
  - memory corruption fixes (#200621
  - fix race in child setup under -f (#180293)
  - show ipc key values in hex (#198179, #192182)
  - disallow -c with -ff (#187847)
  - Resolves: RHBZ #179740, RHBZ #192193, RHBZ #204950, RHBZ #218435
  - Resolves: RHBZ #193808, RHBZ #219423, RHBZ #171626, RHBZ #173050
  - Resolves: RHBZ #218433, RHBZ #218043, RHBZ #118696, RHBZ #178633
  - Resolves: RHBZ #191275, RHBZ #209856, RHBZ #200621, RHBZ #180293
  - Resolves: RHBZ #198179, RHBZ #198182, RHBZ #187847


author: Jakub Jelinek <jakub@redhat.com> - 4.5.14-4
changelog:
  - Fix ia64 syscall decoding (#206768)
  - Fix build with glibc-2.4.90-33 and up on all arches but ia64
  - Fix build against 2.6.18+ headers


author: Roland McGrath <roland@redhat.com> - 4.5.14-1
changelog:
  - Fix biarch decoding of socket syscalls (#174354).
  - Fix biarch -e support (#173986).
  - Accept numeric syscalls in -e (#174798).
  - Fix ipc syscall decoding (#164755).
  - Improve msgrcv printing (#164757).
  - Man page updates (#165375).
  - Improve mount syscall printing (#165377).
  - Correct printing of restarting syscalls (#165469).


author: Roland McGrath <roland@redhat.com> - 4.5.13-1
changelog:
  - Fix setsockopt decoding on 64-bit (#162449).
  - Fix typos in socket option name strings (#161578).
  - Display more IPV6 socket options by name (#162450).
  - Don't display inappropriate syscalls for -e trace=file (#159340).
  - New selector type -e trace=desc for file-descriptor using calls (#159400).
  - Fix 32-bit old_mmap syscall decoding on x86-64 (#162467, #164215).
  - Fix errors detaching from multithreaded process on interrupt (#161919).
  - Note 4.5.12 fix for crash handling bad signal numbers (#162739).


author: Roland McGrath <roland@redhat.com> - 4.5.12-1
changelog:
  - Fix known syscall recognition for IA32 processes on x86-64 (#158934).
  - Fix bad output for ptrace on x86-64 (#159787).
  - Fix potential buffer overruns (#151570, #159196).
  - Make some diagnostics more consistent (#159308).
  - Update PowerPC system calls.
  - Better printing for Linux aio system calls.
  - Don't truncate statfs64 fields to 32 bits in output (#158243).
  - Cosmetic code cleanups (#159688).


author: Roland McGrath <roland@redhat.com> - 4.5.10-1
changelog:
  - Fix select handling on nonstandard fd_set sizes.
  - Don't print errors for null file name pointers.
  - Fix initial execve output with -i (#143365).


author: Roland McGrath <roland@redhat.com> - 4.5.9-2
changelog:
  - update ia64 syscall list (#146245)
  - fix x86_64 syscall argument extraction for 32-bit processes (#146093)
  - fix -e signal=NAME parsing (#143362)
  - fix x86_64 exit_group syscall handling
  - improve socket ioctl printing (#138223)
  - code cleanups (#143369, #143370)
  - improve mount flags printing (#141932)
  - support symbolic printing of x86_64 arch_prctl parameters (#142667)
  - fix potential crash in getxattr printing


author: Roland McGrath <roland@redhat.com> - 4.5.8-1
changelog:
  - fix multithreaded exit handling (#132150, #135254)
  - fix ioctl name matching (#129808)
  - print RTC_* ioctl structure contents (#58606)
  - grok epoll_* syscalls (#134463)
  - grok new RLIMIT_* values (#133594)
  - print struct cmsghdr contents for sendmsg (#131689)
  - fix clock_* and timer_* argument output (#131420)


author: Roland McGrath <roland@redhat.com> - 4.5.7-2
changelog:
  - new upstream version, misc fixes and updates (#128091, #129166, #128391, #129378, #130965, #131177)


author: Roland McGrath <roland@redhat.com> 4.5.6-1
changelog:
  - new upstream version, updates ioctl lists (#127398), fixes quotactl (#127393), more ioctl decoding (#126917)


author: Roland McGrath <roland@redhat.com> 4.5.3-1
changelog:
  - new upstream version, mq_* calls (#120701), -p vs NPTL (#120462), more fixes (#118694, #120541, #118685)


author: Jakub Jelinek <jakub@redhat.com> 4.4-8
changelog:
  - newer version of the clone fixing patch (Roland McGrath)
  - aio syscalls for i386/ia64/ppc (Ben LaHaise)


author: Preston Brown <pbrown@redhat.com> 4.3-1
changelog:
  - new upstream version.  Seems to have integrated most new syscalls
  - tracing threaded programs is now functional.


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - doh, actually apply the 2.4 syscalls patch
  - make it compile with 2.4.0-test7-pre4+ headers, add
    getdents64 and fcntl64


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - upgrade to 3.99 in order to
  -    add new 2.2.x open flags (#2955).
  -    add new 2.2.x syscalls (#2866).
  - strace 3.1 patches carried along for now.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added the umoven patch from James Youngman <jay@gnu.org>
  - fixed build problems on newer glibc releases


author: John Dennis <jdennis@redhat.com> - 2.0.5-3
changelog:
  - Resolve: bug #436564: socket.getsockopt() on ppc generates exception
  	  Fix typo in original setroubleshoot-get_credentials.patch


author: John Dennis <jdennis@redhat.com> - 2.0.5-2
changelog:
  - Resolve: bug #437857: python error in system shutdown
  	- Resolve: bug #436564: socket.getsockopt() on ppc generates exception


author: <jdennis@redhat.com> - 2.0.2-1
changelog:
  - Resolve bug #428252: Problem with update/remove old version
  	- Add code to validate xml database version, if file is incompatible it is not read,
  	  the next time the database is written it will be in the new version format.
  	  This means the database contents are not preserved across database version upgrades.
  	- Remove postun trigger from spec file used to clear database between incompatible versions
  	  the new database version check during database read will handle this instead
  	- bullet proof exit status in init script and rpm scriptlets
  	- Resolve bug #247302: setroubleshoot's autostart .desktop file fails to start under a KDE session
  	- Resolve bug #376041: Cannot check setroubleshoot service status as non-root
  	- Resolve bug #332281: remove obsolete translation
  	- Resolve bug #344331: No description in gnome-session-properties
  	- Resolve bug #358581: missing libuser-python dependency
  	- Resolve bug #426586: Renaming translation po file from sr@Latn to sr@latin
  	- Resolve bug #427260: German Translation
  	- enhance the sealert man page


author: <jdennis@redhat.com> - 2.0.1-1
changelog:
  - make connection error message persist instead of timeout in browser
  	- updated Brazilian Portuguese translation: Igor Pires Soares <igor@fedoraproject.org>
  	- implement uid,username checks
  	- rpc methods now check for authenticated state
  	- fix html handling of summary string
  	- add 'named' messages to status bar, make sure all messages either timeout or are named
  	- fix ordering of menus, resolves bug #427418
  	- add 'hide quiet' to browser view filtering, resolves bug #427421
  	- tweak siginfo text formatting
  	- add logon to SECommandLine so that sealert -l <local_id> works


author: <jdennis@redhat.com> - 2.0.0-1
changelog:
  - prepare for v2 test release
  	- Completed most work for version 2 of setroubleshoot, prepare for test release
  	- import Dan's changes from the mainline
  	  primarily allow_postfix_local_write_mail_spool plugin
  	- escape html, fix siginfo.format_html(), siginfo.format_text()
  	- add async-error signal
  	- change identity to just username
  	- make sure set_filter user validation works and reports error in browser
  	- fix generation of line numbers and host when connected to audispd
  	- add permissive notification, resolves bug #231334: Wording doesn't change for permissive mode
  	- resolves bug #244345: avc path information incomplete
  	- get the uid,gid when a client connects to the server
  	- set_filter now verifies the filter is owned by the user,
  	- resolves bug #288261: setroubleshoot lack of user authentication
  	- remove filter options which weren't being used
  	- change '@' in audit data hostname to '.'
  	- remove restart dialog
  	  resolves bug #321171: sealert's dialog after update is higly confusing
  	- fix rpc xml arg
  	- fix handling of host value
  	- tweak what fields are in signature
  	- move data items which had been in 'avc' object into siginfo
  	- clean up siginfo format
  	- large parts of new audit data pipeline working, checkpoint
  	- fix duplicate xml nodes when generating xml tree
  	- audit event can now be xml serialized
  	- switch from using int's for audit record types to strings
  	- avoid conversion headaches and possibilty of not being
  	  able to convert a new unknown type
  	- add logic to allow XmlSerialize to be subclassed and init_from_xml_node to be overridden
  	- add support to xml serialize classes AuditEventID, AuditEvent, AuditRecord
  	- use metaclass for xml class init
  	- start adding xml support to audit data classes
  	- Use metaclass to wrap class init
  	- move xml serialization code from signature.py to xml_serialize.py
  	- simplify aspect of the serialization code
  	- add unstructured xml mapping, each xml element name has its content mapped to obj.name
  	- modify xml serialization to be driven by xml contents
  	- general clean up
  	- checkpoint conversion of serialization to use metaclasses
  	- clean up class/data specifications for XmlSerializable
  	- add support for client rpc testing
  	- add changelog entry
  	- add SubProcess class to setroubleshootd in preparation to
  	- run daemon as subprocess so we can gather results and
  	  compare them to the expected data we sent
  	- rewrite all plugins to use new v2 audit data
  	- add SubProcess class to setroubleshootd in preparation to 
            run daemon as subprocess so we can gather results and
            compare them to the expected data we sent
  	- add new test support: add config section 'test', add boolean 'analyze' to
  	  config test section, add class TestPluginReportReceiver which is installed
  	  if test.analyze is True, it prints analysis report. In test_setroubleshootd
  	  send AUDIT_EOE to assure sequential event processing so analysis results
  	  have same ordering as events that are sent by test_setroubleshootd
  	- alert signatures now include host information, alerts will be grouped by host


author: John Dennis <jdennis@redhat.com> - 1.10.7-1
changelog:
  - Fix spec file requires for opening an HTML page
  	  In configure.ac search for xdg-open and htmlview in priority order,
  	  set variable html_browser_open to the one found, in spec file require
  	  xdg-utils for fedora and htmlview for RHEL.

  	- add "Host" column in browser
  	  add "Toggle Column Visibility" menu to toggle display of any column on/off

  	- Resolves bug #310261: setroubleshoot notifications aren't throttled

  	- add support for AUDIT_EOE, end-of-event, if AUDIT_EOE immediately
  	  emit cached event. Disable timeouts used to flush events if
  	  AUDIT_EOE has been seen.


author: John Dennis <jdennis@redhat.com> - 1.10.5-1
changelog:
  - update code for command line log file scanning to work with
  	  new log file scanning code introduced for the browser.

  	- update Bulgarian translation (Doncho N. Gunchev (gunchev@gmail.com))

  	- update Polish translation (Piotr Drąg (raven@pmail.pl))

  	- Resolves bug #239893: sealert wakes up very often
  	  This was caused by the use of threads and pygtk's thread signal
  	  handling.  The only use of threads in sealert was for log file
  	  scanning so that the UI would remain responsive during a
  	  scan. Threads in sealert have now been completely
  	  removed. Instead the scanning work is performed in a gobject idle
  	  function called from the main loop. The idle function is written
  	  as a python generator function which allows for the function to
  	  perform a small amount of work, save it's execution state and
  	  return. The next time the idle function is called from the main
  	  loop it resumes execution from it's last state until it decides
  	  to yield control again. This way the long running scan/analysis
  	  can be performed in small successive units of work during the
  	  time the application is otherwise idle and it does not interfere
  	  with the rest of the GUI event processing. Everything now occurs
  	  in an event loop, think of it as the applications process/thread
  	  scheduler whose event handlers execute time slices.

  	- rewrote parts of the audit input pipeline to use generators
  	  instead of callbacks, thus permitting the logfile scanning code
  	  to yield control with more granularity. Also updated
  	  test_setroubleshootd and audisp_listen to use the new
  	  generator/yield logic.

  	- rewrote the dialog used for scanning log files, progress bar
  	  updates are now in the dialog, the scan can be terminated part
  	  way through, errors from the scan are reported in pop-up dialog,
  	  one can only dismiss the dialog with success if the scan had
  	  been successfully run to completion, otherwise the user is only
  	  left with the option to cancel.

  	- Relates bug #252035  bug #247469, setroubleshootd and sealert should
  	  exit if SELinux is disabled.

  	- add utility functions escape_html() and unescape_html()

  	- fix initial sort order in browser, track sort order in browser

  	- modify AVC.get_path() to only return a value if the 'path' field is
  	  set, formerly it also considered the fields 'name' & 'file' which were
  	  incorrect. get_path() now also looks to see if the string begins with a
  	  slash for a fully qualified path, if not it looks to see if its a 
  	  pseudo path such as 'pipe[12345]' or 'socket[12345]' and if so strips out
  	  the instance information inside the brackets and returns just the type of 
  	  the pseudo path. This is done because we do not want path information
  	  in the signature to be unique for each instance of the denial.

  	- modify the TimeStamp class to hide it's internal datetime member,
  	  remove the cmp() method, the internal __cmp__ will be automatically invoked.

  	- require selinux policy version in spec file to allow system dbus use
  	
  	- Resolves bug #256601: audit2allow generates incorrect syntax when comma "," in
  	  denied list

  	- update po i18n files

  	- Add support for pruning database by age and size


author: John Dennis <jdennis@redhat.com> - 1.10.3-1
changelog:
  - modify avc_audit.py to use new audit_data.py implementation

  	- can listen for audit events on either /var/run/audit_events
  	  in bindary protocol mode or /var/run/audisp_events in
  	  text protocol mode


author: John Dennis <jdennis@redhat.com> - 1.10.2-1
changelog:
  - remove all copied code from test_setroubleshootd, now we import
  	  from setroubleshoot
  	
  	- export ClientConnectionHandler from rpc.py as a base class.
  	  Derive SetroubleshootdClientConnectionHandler and
  	  AuditClientConnectionHandler from ClientConnectionHandler.

  	- add audisp_listen as test program

  	- create setroubleshoot sym link in top devel directory pointing
  	  to src so import setroubleshoot.foo if PYTHONPATH=topdir

  	- add get_option, convert_cfg_type to config.py.in so that one
  	  can pass optional dict to override config file settings

  	- rewrite log_init() so it's easier for other programs to use it,
  	  fix the import logic concering log & config

  	- remove log code from test_setroubleshoot, now just does import
  	  from setroubleshoot.
  	
  	- test_setroubleshootd can now handle audit records in both text
  	  and binary formats, can be selected by command line arg. It can now
  	  either output to clients connecting on a socket or to stdout. Can
  	  now optionally exit after N socket client connections.

  	- remove non audit record lines from test data

  	- remove config_init() and log_init() from package __init__.py
  	  It was the wrong place to call them, now call them when the
  	  process initializes before the first setroubleshoot imports

  	- add parse_config_setting() and set_config() to config module
  	- setroubleshootd now accepts -c --config command line arg
  	- test_sectroubleshoot: add err defines & program_error exception
  	  add is_valid() tests to assure we read a valid audit record
  	  log the unrecognized line if not valid, clean up socket close()

  	- Relates Bug #247056, update initscript to LSB standards
  	  Note: LSB initscripts in Fedora is not yet a resolved issue,
  	  the changes implemented were to add an LSB block and support
  	  the new LSB try-restart and force-reload commands. However
  	  the new /lib/lsb/init-functions are NOT currently used as this
  	  is the unstable part.


author: John Dennis <jdennis@redhat.com> - 1.10.0-1
changelog:
  - move all plugins and their translations to independent package
  	- wrap XML generation inside try/except
  	- correct how access list is obtained in avc_auparse.py
  	- add try/except around top level of AnalyzeThread.run so exceptions
  	  in the thread get reported and the analysis thread does not just die.
  	- also add try/except around LogfileThread.process_logfile
  	- add new function assure_file_ownership_permissions()
  	- server now forces it's database file permissions/ownership to be 0600 root:root
  	- rpm now forces the server's database file permissions/ownership to be 0600 root:root
  	- Resolves Bug #251545: Review Request: setroubleshoot-plugins - analysis plugins for setroubleshoot
  	- clean up some other rpmlint warnings in setroubleshoot.spec
  	- fix missing install of setroubleshoot icon and sym link to it
  	- Resolves Bug #251551, setroubleshoot shows up in in wrong desktop menu
  	  also run desktop-file-install in rpm install
  	- add /etc/dbus-1/system.d/setroubleshootd.conf dbus configuration file
  	- Resolves Bug #250979, Bug #250932 Missing dependencies
  	- Restore plugins/Makefile.am which got nuked somehow
  	- remove dus.dbus_bindings.bus_name_has_owner(), deprecated as of F7
  	- wrap rpm transactions in try/except


author: John Dennis <jdennis@redhat.com> - 1.9.7-1
changelog:
  - Resolves Bug# 241739, this bug is the lead bug for several bug reports,
  	  all consequences of the same problem, setroubleshootd/sealert when run
  	  in a non latin language environment because of incompatibilities in
  	  i18n encoding between components.


author: John Dennis <jdennis@redhat.com> - 1.9.6-1
changelog:
  - add avc_auparse.py, now has option to use audit parsing library instead of
  	  built-in audit parsing.
  	- fix bug in log file scanning and detail display update
  	- Resolves Bug# 238516, python pkg directory not owned


author: Dan Walsh <dwalsh@redhat.com> - 1.9.4-1
changelog:
  - Remove disable_trans boolean
  	- Check for paths in filesystem before suggesting chcon -R 
  	- Remove default to listen on local ports


author: John Dennis <jdennis@redhat.com> - 1.9.3-1
changelog:
  - install icon in /usr/share/icons, refer to icon by name using standard API
  	- Fix performance problems in setroubleshoot browser log file scanning
  	- Significant rewrite of data/view management code in setroubleshoot
  	  browser. data and view now cleanly separated, can easily switch
  	  between data views while maintaining selections, view state, with
  	  proper update of status information in status area
  	- Resolves Bug# 227806: right click context menu resets selection
  	- Logfile scans now operate in independent thread, proper asynchronous
  	  updates of browser during scan, browser used to appear to hang
  	- Resolved Bug# 224340: Rewrite Menu/Toobar/Popup to use UIManger instead of glade
  	- Add toobar support
  	- Implement GUI to edit email recipient list in setroubleshoot browser
  	- Added user help to setroubleshoot browser
  	- Related Bug# 224343: Fix setroubleshoot browser to respond to desktop theme changes
  	- improve traceback error reporting in sealert
  	- rewrite AboutDialog, replacing glade version
  	- Resolves bug #229849  Bug# 230115, Related bug #221850: fix uuid code to resolve
  	  '_uuid_generate_random' is not defined error


author: John Dennis <jdennis@redhat.com> - 1.8.16-1
changelog:
  [John Dennis <jdennis@redhat.com>]
  	- Resolved: Bug# 224343 sealert's "Aditional Info:" text should be in white box
  	- Resolved: Bug# 224336 sealert should have GtkRadioButtons in menu View
  	- Related: bug #224351
  	  Rewrite parts of logging support to better support changing output
  	  categories, output destinations. Now -v -V verbose works in sealert.
  	- Resolves bug# 225161, granted AVC's incorrectly identified as a denial
  	- add alert count to status bar
  	- add "Help" command to Help menu, opens web browser on wiki User FAQ
      [Dan Walsh  <dwalsh@redhat.com>]
  	- Make setroubleshoot.logrotate correctly


author: John Dennis <jdennis@redhat.com> - 1.8.14-1
changelog:
  - Resolved: bug# 221850
  	  plugin module loading was failing in python 2.5 with the message
  	  "SystemError: Parent module 'plugins' not loaded". This is due to a
  	  change in behavior between python 2.4 and 2.5, in python 2.4 the lack
  	  of a parent module was silently ignored. The fix is to load
  	  plugins.__init__ first.


author: John Dennis <jdennis@redhat.com> - 1.8.13-1
changelog:
  - update translations

  	- change SETroubleshootDatabase so it is optional if it's backed
  	  by a file, this fixes the problem of us littering temporary files
  	  when scanning logfiles which does not require persistence.

  	- disable the view logfile menu item if no logfile has been opened

  	- fix redundant log messages for case where there is no log file and
  	  the console flag is set. When there is no log file the logging
  	  module opens a console stream, thus the console stream produced
  	  by the console flag was redundant.

  	- add username and password command line arguments
  	  rework startup logic so that all command line args are processed
  	  before we do any real work
  	
  	- rework the email preferences so that each email address can
  	  have a filter type associated with it.

  	  add a new filter_type "Ignore After First Alert" which filters
  	  after the first alert has been delivered

  	- add UI for setting the email addresses alerts are sent to.
  	  Add menu item to edit email list, add email list dialog.
  	  Remove 'recipient' config file entry, now list is stored
  	  in seperate file. Add rpc to query and set the email list,
  	  the GUI calls this to get the current list from the server
  	  and set it in the server, it is the server which reads and 
  	  writes the file. Add 'enable' flag to each email entry.
  	  Modify how the server iterates over the email list when it
  	  receives an alert. When marking an alert as having been sent
  	  the username is the email address but with 'email:' prepended so
  	  as not to collide with non-email filtering options for the same user.


author: John Dennis <jdennis@redhat.com> - 1.8.11-1
changelog:
  - Resolved: #216575, more translations
  	- Replace delete and expunge menu labels with something more intuitive
  	- add ability for browser to be restarted with identical window
  	  position and state
  	- add pkg version and protocol version to logon handshake, test for
  	  compatibility between clint and server, prompt for restart
  	- add non-modal restart dialog
  	- add dialog to display traceback if sealert faults with an uncaught
  	  exception, try to limit invisible errors
  	- fix return args on rpc method
  	- add instance id to server


author: Dan Walsh <dwalsh@redhat.com> - 1.8.8-1
changelog:
  - Additional Translations
  	- Change sealert to be able to run without X-Windows
  	- Resolved: #216575


author: John Dennis <jdennis@redhat.com> - 1.8.6-1
changelog:
  - Resolves: bug# 218150,
  	  "If view is set to "hide delete" you cannot filter new entries"
  	  Actually, the bug was toggle cell renderer was connected to the
  	  base model instead of the model attached to the view, the sort
  	  model, this meant the toggle was occuring on the wrong row if
  	  the view was sorted differently than the base model.


author: John Dennis <jdennis@redhat.com> - 1.8.5-1
changelog:
  - fix bug, "could not convert path to a GtkTreePath" when database 
  	  is initially empty, caused by last_selected_row == None


author: John Dennis <jdennis@redhat.com> - 1.8.3-1
changelog:
  - Resolves: bug# 217961, sealert needs pygtk2-libglade
  	- more i18n translations
  	- Resolves: bug# 217710, date representation did not respect locale,
  	  at the same time remove old date formatting code, now cruft since
  	  we can't use it because it was specific to US English.
  	- fix how selections are handled when rows are expunged.
  	- add Copy to Edit menu, for copying selection from detail pane,
  	  unfortunately gtkhtml2 widget does not preserve line breaks between
  	  table rows.


author: John Dennis <jdennis@redhat.com> - 1.8.1-1
changelog:
  - Resolves: bug# 216936, bug# 215290, add 'Copy Alert' edit menu item
  	- clean up menu items, add tooltips
  	- fix printing so it will work with multiple alerts, force font to
  	  monospace 10pt, display error dialog if printing fails.
  	- Resolves: bug# 216908, platform and raw audit messages were not wrapped
  	  to fit on page.
  	- Related: bug# 216575, update i18n po files
  	- Resolves: bug# 216941, set default folder for save operation, also set
  	  default filename
  	- Resolves: #bug 216327 add menu items "toggle hide deleted", "select none". Add model
  	  filter to control visibility of alerts
  	- Resolves: bug# 214218, sealert with no command line
  	  arguments induces startup as dbus service, this had been a
  	  regression.
  	- Resolves: bug# 216327, rework how deletes are performed in browser. Delete
  	  now marks each seleted siginfo with a delete flag, expunge
  	  permanently deletes siginfo's marked for deletion, also add undelete
  	  command, removed delete confirmation dialog. Modify how text
  	  attributes in cell renderer are computed to allow for
  	  strike-throughs of alerts marked for deletion.
  	- multiple alerts can now be selected, add select all command,


author: Dan Walsh <dwalsh@redhat.com> - 1.7-1
changelog:
  [John Dennis <jdennis@redhat.com>]
  	- Add command line utilities
  	- logfile scanning finally seems to work connected to browser
  	- Additional Information section of report now includes line
  	  number information (if alert was generated from logfile)
  	- replace database update_callback() with notify interface, a more
  	  generic solution more easily shared between components
  	- object implementing rpc method is now explicitly attached via
  	  connect_rpc_interface() instead of walking the MRO chain with
  	  magic exclusions. explicitly connecting is more flexible and
  	  robust (no getting the wrong object by mistake)
  	- fix handling of return args in local rpc case
  	- fix signal connections between audit and logfile
  	- split databae and database_properties for audit and logfile
  	- fix initial connection state
  	- fix lookup_local_id


author: Dan Walsh <dwalsh@redhat.com> - 1.3-1
changelog:
  - Speed enhancments
      [John Dennis <jdennis@redhat.com>]
  	- log file parsing now approx 4 times faster
  	- greatly enhance the statistics reporting capability in attempt
  	  to diagnose slow log file parsing performance
  	- make gathering of environmenatal information optional,
  	  environment information is only relevant at the time the
  	  alert fires, not in a post processing scenario
  	- clean up several places where environmental information was
  	  assumed and/or was always gathered, or gathered in the wrong place.


author: Dan Walsh <dwalsh@redhat.com> - 1.0-1
changelog:
  - Release of first version
  	- Fix icon
      [John Dennis <jdennis@redhat.com>]
  	- Memory leak fixes
  	- Substitution fixes
  	- File names in hex fixes


author: Dan Walsh <dwalsh@redhat.com> - 0.48-1
changelog:
  - Sealert only notify dropped connection once
  	- setroubleshoot shutdown cleanly
      [John Dennis <jdennis@redhat.com>]
  	- Gui cleanups


author: Dan Walsh <dwalsh@redhat.com> - 0.46-1
changelog:
  - Add new plugins cvs_data, rsync_data, xen_image, swapfile, samba_share
      [John Dennis <jdennis@redhat.com>]
  	- clear the GUI of old data before loading new data,
  	  fix the code used to display the filter icon in the filter column


author: Dan Walsh <dwalsh@redhat.com> - 0.43-1
changelog:
  - Fix mail handling
  	- fix bugs related to recording per user per signature filtering
      [John Dennis <jdennis@redhat.com>]
  	- fix bugs related to recording per user per signature filtering
      [Karl MacMillan <kmacmill@redhat.com>]
  	- Add signal handling to client and server.
  	- Fix minor plugin bugs.


author: Dan Walsh <dwalsh@redhat.com> - 0.42-1
changelog:
  [Karl MacMillan <kmacmill@redhat.com>]
  	- Add rpm information for target.
  	- Add hostname and uname to signature info
  	- Add display of the full AVC
  	- Add display of the analysis id
  	- Change html generation to be separated out and us elemmenttree
      [John Dennis <jdennis@redhat.com>]
  	- add CommunicationChannel class to encapsulate data transfer
  	  operations, in particular to provide an object threads can lock
  	  during data transfer.
  	- checkpoint the logfile scanning code, somewhat working


author: Dan Walsh <dwalsh@redhat.com> - 0.40-1
changelog:
  - Fix notification window problems.  Now dissappears and does not regenerate if
  it has already been seen


author: Dan Walsh <dwalsh@redhat.com> - 0.39-1
changelog:
  - Add Icon
      [John Dennis <jdennis@redhat.com>]
  	- dispatcher.py: rework how audit messages injected into the
  	  system and processed. Much of this work was in support of log file
  	  scanning which should be coupled to the exact same processing code
  	  as audit messages arriving from the audit socket. In essence log
  	  file scanning synthesizes an audit message and we inject it into
  	  the system the same way socket messages are injected. This was
  	  also an excellent moment correctly handle out of order audit
  	  messages, something we were not able to handle previously. This
  	  may have been contributing to splitting what should have been a
  	  single alert into two or more separate alerts because we didn't
  	  recongize the incoming audit events as a single event. Correctly
  	  assembling out of order messages introduced a fair amount of extra
  	  complexity as we now maintain a cache of recent audit events, this
  	  is fully documented in dispatcher.py
  	- Turn notifications back on by default.
      [Karl MacMillan <kmacmill@redhat.com>]
  	- Separated out HTML rendering and made it easier to translate.


author: Dan Walsh <dwalsh@redhat.com> - 0.38-1
changelog:
  [Dan  Walsh]
  	- Hook up the rest of the menu bars on browser window
  	- Add public_content.py plugin
      [John Dennis <jdennis@redhat.com>]
  	- add delete_signatures() method to AlertClient class
  	- start using the AppBar in the browser.
  	- "open logfile" now connected all the way from browser menu
  	  to server rpc, still needs implementation, but "plumbing" is working.
  	- fixes for the date/time dialog
  	- remove install of setroubleshoot.glade, we now only use
  	  setroubleshoot_browser.glade
  	- some fixed to DateTimeDialog


author: John Dennis <jdennis@redhat.com> - 0.35-1
changelog:
  - add sorting on category column and seen column in browser,
  	  fix reference to my_draw() in print function.

  	- make browser window hidden by default so it does not flash
  	  when it's first realized, connect to the "realize" signal to
  	  initially position the vpane, add signal handlers to track
  	  when the browser is visible, the presentation of the status
  	  icon now checks if the browser is visible, the status icon is
  	  not presented if the browser is already displayed.


author: Dan Walsh <dwalsh@redhat.com> - 0.34-1
changelog:
  - Standardize on the browser. remove alert window
      [John Dennis <jdennis@redhat.com>]
  	- remove all vestiges of popup alert, now browser is the only
  	  UI game in town
  	- restore the automatic updating of the browser window which had
  	  been a regression, the AlertClient class now emits signals which
  	  the GUI classes can connect to receive signals from the fault server,
  	  also fix the "mark seen" regression
  	- browser.py: restore mark_seen timeout


author: Dan Walsh <dwalsh@redhat.com> - 0.32-1
changelog:
  - Add avc_syslog to syslog translated avc message
  	- Fix submitbug button
      [John Dennis <jdennis@redhat.com>]
  	- fix signature inflation, all data attached to a signature is now
  	  encapsulated in a SEFaultSignatureInfo (siginfo) class. The GUI no
  	  longer reaches into a signature looking for information, it looks
  	  in the siginfo. The Plugin class now defines the method
  	  get_signature() which report() calls to obtain the signature. The
  	  default signature provided by the Plugin class includes the
  	  analysisID, an AVC with just the src & target contexts, and the
  	  object_path. All data accesses and parameters which had been "sig
  	  and solution" are now done via the unified siginfo class. There is
  	  still a bit more work to be done on this but this represents a
  	  reasonble point to checkpoint the code in CVS.


author: John Dennis <jdennis@redhat.com> - 0.30-1
changelog:
  - fix bug #203479, missing requires of audit-libs-python
  	- add support to sealert to listen on a dbus session signal to display
  	  the gui. This is needed for when the status icon is not visible and
  	  the user wants to see the UI. There is now a seperate program
  	  setroubleshoot_launch_gui which emits the signal.


author: John Dennis <jdennis@redhat.com> - 0.27-1
changelog:
  - load_plugins() now catches exceptions when a plugin won't load,
  	  reports the traceback in the log file, and continues with the next
  	  plugin. Previously a bad plugin caused the entire plugin loading
  	  to abort and no plugins were loaded.
  	- Add "daemon_name" to automake variables, change pid file to match
  	- turn off "noreplace" on config file till things settle down a bit
  	- browser.py now validates data, also test for missing column data in the
  	  cell_data function to avoid exceptions.
  	- add stub for analyzie_logfile() rpc call
  	- turn off balloon notifications by default in config file,
  	  libnotify is just plain busted at this point :-(
  	- only the setroubleshootd daemon creates it's log file
  	  under /var/log now, the user app's do it in /tmp, change file
  	  permissions on /var/log/setroubleshoot back to 0644.
  	- sealert now looks up the username rather than hardcoding it to "foo"
  	- CamelCase to lowercase_underscore clean up


author: Dan Walsh <dwalsh@redhat.com> - 0.19-1
changelog:
  2006-08-08  Dan Walsh <dwalsh@redhat.com>
  	- Fix up handling of mls ranges in context
  	- Cleanup some pychecker errors

  2006-08-07  John Dennis <jdennis@redhat.com>
  	- add first seen, last seen, and report count to alert detail view
  	- make the seen icon work, if the alert has been displayed more
  	  than N seconds, mark the alert as having been seen by the user
  	  and update the icon is the list view
  	- change the schema for the xml data; the database now has a version,
  	  there is a local id attached to each signature, the filter list in
  	  the siginfo was replaced by a list of per user data, the per user
  	  data now contains the filter, seen_flag. Modify all the code which
  	  was operating on the filter information to use the new model.
  	- fix the xml serialization so that booleans can be used as a basic
  	  type and also so that non-string types can be used in element
  	  attributes (e.g. int, bool) and the serialization code will
  	  automatically convert between python types and strings.


author: Dan Walsh <dwalsh@redhat.com> - 0.17-1
changelog:
  [John Dennis <jdennis@redhat.com>]
  	- clean up and rework the timestamp code in util.py so that
  	  time zones are handled properly, there were a number of bugs.
  	  Hopefully it's correct now because timezone handling is a pain.
  	- change the time format in the browser so all times are displayed
  	  identically, the friendly time relative format was hard to compare.
  	- modify the plugin 'make install' to delete all existing plugin's
  	  prior to installing the new ones
  	- add popup menu to status icon to choose between browser and
  	  alert GUI (not fully connected yet). Several bug fixes related
  	  to changing the filter_type from a string to an int.
  	- add filter selection to bottom pane, change filter_type from
  	  string to integer constant. Enhance how columns are handled.
  	  Get init_combo_box to work. Remove unused RPM and Bugzilla
  	  fields from bottom pane. Modify the default size of the browser
  	  window. Fix missing import in util.py.
  	- add ability in broswer to sort on columns, initially the report
  	  count column and the last seen date column. The date column now
  	  stores a TimeStamp object instead of a string. Add new method
  	  to TimeStamp to return a friendly string relative to the current
  	  time. The date column in the browser now has a cell data function
  	  which invokes the friendly format method of the TimeStamp object.
  	- add ability fo serialize to/from xml for classes which can
  	  inititialized from strings and serialized as strings (e.g. numbers,
  	  TimeStamps, etc.)
  	- add count of how many times a signature is reported, the date
  	  when first and last reported, add columns for report count and
  	  last date count to browser.
  	- checkpoint browser code, list pane and detail pane now working.
  	- add initial support for browser applet, move some functions which
  	  kept getting reused to util.py
  	- add reporting of environment to email alert (email alerts still
  	  need work)
      [Dan  Walsh <dwalsh@redhat.com>]
  	- Fix disable_trans.py set_boolean call
  	- Complete all boolean plugins except disable
  	- Change interface to use audit unix domain socket


author: Dan Walsh <dwalsh@redhat.com> - 0.16-1
changelog:
  [John Dennis <jdennis@redhat.com>]
  	- modify SetFilter in server to return errors instead of
  	  throwing an exception. Default the filter list on each alert display.
  	- minor tweaks to alert queue handling
  	- fix analyze() parameter list in ftp_is_daemon.py plugin
  	- sealert now responds to pending alerts more correctly, it shows
  	  how many pending alerts are in the queue, if you filter the pending
  	  alert status is updated, the next alert button will advance you
  	  to the next alert in the queue
  	- simplify major pieces of sealert by coalescing common code
  	  into subroutines.
      [Dan  Walsh <dwalsh@redhat.com>]
  	- Complete all boolean plugins except disable
  	- Make Close button work.
  	- Make setroubleshoot_dispatcher exit if it gets an avc about itself


author: Dan Walsh <dwalsh@redhat.com> - 0.15-1
changelog:
  [Karl MacMillan <kmacmill@redhat.com>]
  	- Add generic templating mechanism to Plugin
  	- Ported all plugins to use templating mechanism


author: Dan Walsh <dwalsh@redhat.com> - 0.8-1
changelog:
  - Added a bunch more plugins
      [Karl MacMillan <kmacmill@redhat.com>]
  	- Add allow_cvs_read_shadow.py, allow_ftp_use_cifs, allow_ftp_use_nfs, and allow_gssd_read_tmp.
  	- Change AVC to have additional helpers for matching messages.
  	- Change Plugin to work better with more than one solution.


author: Dan Walsh <dwalsh@redhat.com> - 0.7-1
changelog:
  - Fix setroubleshoot_dispatcher to catch all information from
  	  avc. Much cleaner interface and no longer uses audit2allow cruft.
  	- Remove toolbar from popup window since it did nothing, and I
  	  think it looks better without it.
  	- fix allow_execmod plugin to report better data.


author: Tim Waugh <twaugh@redhat.com> 2.17-5
changelog:
  - Fix init script (bug #52862).
  - Avoid temporary file vulnerability in init script.
  - Update README: it's --add, not -add.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - pulled into distribution
  - used setserial-2.12_CTI.tgz instead of setserial-2.12.tar.gz (former is
    all that sunsite has) - not sure what the difference is.


author: Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>
changelog:
  - added %attr's
  - added sanity check for RPM_BUILD_ROOT
  - setserial is now installed into /bin, where util-linux puts it and all
    startup scripts expect it.


author: Ondrej Vasik <ovasik@redhat.com> 2.5.58-8.el5
changelog:
  - remove comments about portmap from /etc/hosts.deny (#509919)
  - added gid (:88) for wbpriv (#501762)
  - fix interactive shell detection in /etc/profile to allow ksh
    users see output from /etc/profile.d/ scripts (#616116)
  - do not override already set PROMPT_COMMAND envvar(#691430)
  - use printf instead of two echos in bashrc script to prevent
    showing text from terminal in terminal title(#620443)
  - respect profile.d scripts umask modifications in tcsh
    login shell again(#617495)
  - remove obsolete order line from /etc/host.conf - no longer in
    use (#703051)
  - respect umask settings from profile.d scripts even with
    bash/ksh login shell (#608987)


author: Ondrej Vasik <ovasik@redhat.com> 2.5.58-6.el5
changelog:
  - due to different sourcing order, move umask setting for csh
    to csh.login for login shells(#199817)
  - do not show error output from profile.d shell scripts in
    noninteractive bash sessions(#199817)


author: Ondrej Vasik <ovasik@redhat.com> 2.5.58-5.el5
changelog:
  - Added uidgid pair (59:59) for tss (#457593)
  - Added uidgid pair (52:52) for puppet (#471918)
  - Added uidgid pair (17:17) for pkiuser (#476317)
  - Added gid (:36) for kvm (#481021)
  - Added uid (36:) for vdsm (#481021)
  - Change reserved shell for news to /sbin/nologin(#449555)
  - increase consistency of behaviour between csh and bash(#199817)


author: Phil Knirsch <pknirsch@redhat.com> 2.5.58-4.el5
changelog:
  - Added uidgid pair for condor (#378091)
  - Added gid for realtime (#432643)
  - Added gid for audio (#253243)


author: Phil Knirsch <pknirsch@redhat.com> 2.5.49-1
changelog:
  - Really switch to new /etc/services file
  - Added /etc/fstab and /etc/mtab to ownership of setup (#177061)


author: Phil Knirsch <pknirsch@redhat.com> 2.5.48-1
changelog:
  - Switched to the new large /etc/services file which fixes #112298, #133683,
    - Fixed pathmunge problem with bashrc (#123621)
  - Removed /usr/X11R6/bin from default PATH (#173856)


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed bug with PROMPT_COMMAND being broken for wierd dirs (#142125)
  - Added hfsplus to know filesystems (#172820)


author: Bill Nottingham <notting@redhat.com> 2.5.46-1
changelog:
  - add buildrequires on bash, tcsh (#161016)
  - move core dump size setting from csh.login to csh.cshrc (#156914)


author: Bill Nottingham <notting@redhat.com> 2.5.34-1
changelog:
  - add dict (#107807)
  - add cyrus services (#118832)
  - move delete-char binding for csh (#113682)
  - do the same path munging for csh as for bash (#57708)
  - add postfix aliases (#117661)
  - fix bashrc login shell check (#104491)
  - add odmr to services (#101098)
  - add distcc to services (#91535)
  - add xterm forware/backward word bindings (#80860)


author: Jens Petersen <petersen@redhat.com> 2.5.18-1
changelog:
  - bring back the screen case in /etc/bashrc, since /etc/screenrc no
    longer sets defhstatus (#60596, #60597)


author: Jens Petersen <petersen@redhat.com> 2.5.16-1
changelog:
  - dont special case screen in /etc/bashrc, since it overrides the user's
    screenrc title setting (#60596)


author: Bill Nottingham <notting@redhat.com> 2.5.8-1
changelog:
  - add nologin to /etc/shells (#53963)
  - fix some quoting issues (#59627)
  - fix screen status line (#60596)
  - fix path regexps (#59624)
  - move profile.d stuff to csh.cshrc (#59946)


author: Nalin Dahyabhai <nalin@redhat.com> 2.5.7-1
changelog:
  - add entries to services (ipp, wnn4, and so on)
  - try to remove duplicates in services (remove nameserver as alias for domain,
    and readnews as alias for netnews)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - lock only needs to be a gid
  - don't set dspmbyte=euc here; do it in lang.csh, and only if necessary (#50318)


author: Nalin Dahyabhai <nalin@redhat.com> 2.4.15-1
changelog:
  - reorder /etc/services to match comments again
  - protocol 118 is stp, not st
  - update URLs in /etc/protocols and /etc/services


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.4.10-1
changelog:
  - Fix bugs #24159 and #30634 again; whoever moved bashrc from bash
    to setup used an old version. :((


author: Bill Nottingham <notting@redhat.com>
changelog:
  - overhaul /etc/protocols (#18530)
  - add port 587 to /etc/services (#25001)
  - add corbaloc (#19581)
  - don't set /usr/X11R6/bin in $PATH if it's already set (#19968)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Clean up /etc/services, separating registered numbers from unregistered
    ("squatted") numbers, and adding some.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add smtps (465/tcp) and submission (587/tcp) to /etc/services for TLS
    support (postfix >= 20001030-2)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - split csh.login into csh.login and csh.cshrc (#various)
  - fix pop service names (#6206)
  - fix ipv6 protocols entries (#6219)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - rename /etc/csh.cshrc to /etc/csh.login (#2931).
  - (note: modified /etc/csh.cshrc should end up in /etc/csh.cshrc.rpmsave)


author: Erik Troan <ewt@redhat.com>
changelog:
  - removed /etc/inetd.conf, /etc/rpc
  - flagged /etc/securetty as missingok
  - fixed buildroot stuff in spec file


author: Nalin Dahyabhai <nalin@redhat.com> 1.19-1
changelog:
  - fix crashers in cases when we find no configuration files (or malformed or
    useless ones) under %{_sysconfdir}/setuptool.d (#211084)


author: Nalin Dahyabhai <nalin@redhat.com> 1.18-1
changelog:
  - fix sorting of multiple options so that precedence is determined
    correctly (#178022)
  - prefer authconfig-tui to authconfig, because if we have both, then
    authconfig is just a command-line app  (#178022)
  - actually include the README


author: Nalin Dahyabhai <nalin@redhat.com> 1.17.3-1
changelog:
  - update PAM configuration to use "include" directive (#170265)
  - conflict with versions of the pam package (< 0.78) which don't
    support the "include" directive


author: Nalin Dahyabhai <nalin@redhat.com> 1.17.2-1
changelog:
  - clean up a compiler warning
  - add a new config file so that the system-config-authentication-tui
    shows up in the menu now that it's been moved


author: Nalin Dahyabhai <nalin@redhat.com> 1.15-1
changelog:
  - prefer system-config-keyboard to kbdconfig (#122575)
  - handle tools which require command-line arguments correctly


author: Nalin Dahyabhai <nalin@redhat.com> 1.14-1
changelog:
  - use control files to find things so that the source needn't be
    revised so often
  - determine available translations at build-time (#102082)


author: Dan Horak <dhorak@redhat.com> - 1.25-4
changelog:
  - fix some issues with rescan-scsi-bus.sh script (#507379)
  - install a symlink to the rescan script with more obvious name
  - Resolves: #507379


author: Dan Horak <dhorak@redhat.com> - 1.25-2
changelog:
  - update URLs
  - fix man pages for sginfo, sg_wr_mode, sg_ses, sg_persist (#433614, #433773, #435100, #435677, #437147)
  - fix usage messages in sg_map26, sg_test_rwbuf (#431190, #431193)
  - fix return value in sg_read_long (#435275)
  - fix options definition in sg_get_config (#433779)
  - fix sg_map26 with more than 32 tapes (#468040)
  - include rescan-scsi-bus script (#467201)
  - Resolves: #431190, #431193, #433614, #433773, #433779, #435100, #435275, #435677, #437147, #468040, #467201


author: Phil Knirsch <pknirsch@redhat.com> 1.17-1
changelog:
  - Update to sg3-utils-1.17
  - Split package up into 3 subpackages: sg3_utils, devel and libs
  - Some minor updates to the specfile


author: Tim Waugh <twaugh@redhat.com> 0.6.3-15
changelog:
  - Patch from Ville Skyttä <ville.skytta at iki.fi> (bug #111625):
    - Include /usr/share/xml in xml-common.
    - Own /usr/share/sgml and /usr/share/xml.


author: Tim Waugh <twaugh@redhat.com> 0.6.3-8
changelog:
  - Back to /usr/share/sgml.  Now install docbook-dtds.
  - Use a real install-sh, not the symlink shipped in the tarball.


author: Tim Waugh <twaugh@redhat.com> 0.6.3-6
changelog:
  - Don't create a useless empty catalog.
  - Don't try to put install things outside the build root.
  - Build requires a libxml2 that actually works.


author: Tim Waugh <twaugh@redhat.com> 0.6.3-1
changelog:
  - 0.6.3.  Incorporates oldsyntax and quiet patches.
  - Make /etc/sgml/sgml.conf noreplace.
  - Own /etc/sgml, various other directories (bug #47485, bug #54180).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Install by hand (man/en/...).  Use %{_mandir}.
  - Use %{_tmppath}.
  - Make install-catalog fail silently if given the old syntax.
  - Add CHANGES file.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-20
changelog:
  - prevent faillog to grow after setmax operation(-m)
  - man page adjustments
  - make useradd delete lock files on failure
    Resolves: #670364, #688892, #715214, #709605


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-19
changelog:
  - fix sequence of arg. parsing and execution in faillog
  - fix ACL support
  - do not alter UIDs over 2147483647 in pwconv and pwunconv
    Resolves: #619150, #673091, #681020


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-16
changelog:
  - faillog does not print entries for all users
  - fix integer underflow in faillog
  - maximum size of groupname and username is 32 characters
  - japanese man page fix
  - support extended ACL's on files and directoris under /etc/skel
    Resolves: #619713, #603692, #586861, #537011, #513055


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-15
changelog:
  - make /etc/default/useradd noreplace
  - make grpconv multiple entries aware
  - fix manipulation with UIDs in useradd and usermod
  - fix handling of sparse faillog file
  - recognize --base-dir properly
  - improve man pages
  - do not call restorecon in usermod
  - fix newusers, so it doesn't create negative UID/GID
    Resolves: #510102, #507706, #487575, #505033, #473054, #469158
    Resolves: #461455, #449154, #494575, #306241


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-14
changelog:
  - fix the problem when useradd or usermod can give users access
    to the root group
    Resolves: #450262


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-13
changelog:
  - use MD5 encryption by default
  - fix "--append" option
  - useradd create user's mailbox file
  - do not run find_new_uid() twice and use getpwuid() to check
    UID uniqueness
  - fix infinitive loop if there are duplicate entries in /etc/group
  - fix chpasswd buffer overflow
  - add SHA256/512 support
    Resolves: #218629, #222563, #231311, #236871, #241585, #247514, #427449


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-8
changelog:
  - improve "-l" option. Do not reset faillog if it's used (#213450).
  - fix "-a" option. Bug was introduced by upstream (#213405).


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.17-6
changelog:
  - fix regression. Permissions on user* group* binaries 
    should be 0750, because of CAPP/LSPP certification
  - fix groupdel man page


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.7-5
changelog:
  - fix memory leak, and CPU spinning when grp_update() and 
    duplicate group entries in /etc/group (#151484)


author: Peter Vrabec <pvrabec@redhat.com> 2:4.0.7-4
changelog:
  - use newgrp binary
  - newgrp don't ask for password if user's default GID = group ID,
    ask for password if there is some in /etc/gshadow 
    and in /etc/group is 'x' (#149997)


author: Adrian Havill <havill@redhat.com> 2:4.0.3-35
changelog:
  - make the limit for the group name the same as the username (determined
    by the header files, rather than a constant) (#56850)


author: Adrian Havill <havill@redhat.com> 2:4.0.3-33
changelog:
  - allow for mixed case and dots in usernames (#135401)
  - all man pages to UTF-8, not just Japanese (#133883)
  - add Polish blurb for useradd -n man page option (#82177)


author: Adrian Havill <havill@redhat.com> 2:4.0.3-31
changelog:
  - check for non-standard legacy place for ncsd HUP (/var/run/nscd.pid) and
    then the std FHS place (/var/run/nscd.pid) (#125421)


author: Dan Walsh <dwalsh@redhat.com> 4.0.3-23
changelog:
  - Add get_enforce checks
  - Clean up patch for potential upstream submission
  - Add removemalloc patch to get it to build on 3.4


author: Nalin Dahyabhai <nalin@redhat.com> 4.0.3-15
changelog:
  - don't convert man pages to UTF-8 for RHEL 3, conditionalized using macro
  - fixup dangling man page references


author: Nalin Dahyabhai <nalin@redhat.com> 4.0.3-14
changelog:
  - lastlog: don't pass a possibly-smaller field to localtime (#109648)
  - configure: call AC_SYS_LARGEFILE to get large file support


author: Nalin Dahyabhai <nalin@redhat.com> 4.0.3-6
changelog:
  - adjust mailspool patch to complain if no group named "mail" exists, even
    though that should never happen


author: Nalin Dahyabhai <nalin@redhat.com> 20000902-13
changelog:
  - prevent libshadow from being built more than once, to keep automake happy
  - change how md5 and md5crypt are enabled, to keep autoconf happy
  - remove unpackaged files after %install


author: Nalin Dahyabhai <nalin@redhat.com> 20000902-12
changelog:
  - force .mo files to be regenerated with current gettext to flush out possible
    problems
  - fixup non-portable encodings in translations
  - make sv translation header non-fuzzy so that it will be included (#71281)


author: Nalin Dahyabhai <nalin@redhat.com> 20000902-4
changelog:
  - use -O0 instead of -O on ia64
  - build in source directory
  - don't leave lock files on the filesystem when useradd creates a group for
    the user (#50269)
  - fix the -o option to check for duplicate UIDs instead of login names (#52187)


author: Bernhard Rosenkraenzer <bero@redhat.com> 20000902-1
changelog:
  - Create an empty mailspool when creating a user so non-setuid/non-setgid
    MDAs (postfix+procmail) can deliver mail (#41811)
  - 20000902
  - adapt patches


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't overwrite user dot files in useradd (#19982)
  - truncate new files when moving overwriting files with the contents of other
    files while moving directories (keeps files from looking weird later on)
  - configure using %{_prefix} as the prefix


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - take LOG_CONS out of the openlog() call so that we don't litter the
    screen during text-mode upgrades


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Remove a fixed-size buffer that caused problems when adding a huge number
    of users to a group (>8192 bytes) (Bugs #3809, #11930)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change symlinked man pages to includers
  - require /usr/bin/newgrp (util-linux) so that /usr/bin/sg isn't left dangling


author: Matt Wilson <msw@redhat.com>
changelog:
  - use mandir for FHS
  - added patches in src/ and po/ to honor DESTDIR
  - use make install DESTDIR=$RPM_BUILD_ROOT


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix usermod patch to check for shadow before doing any shadow-specific stuff
    and merge it into the pwlock patch


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - Serial: 1 because now we are using 19990827 (why the heck can't they have
    a normal version just like everybody else?!)
  - ported all patches to the new code base


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - have userdel remove user private groups when it is safe to do so
  - allow -f to force user removal even when user appears busy in utmp


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - Note that /usr/sbin/mkpasswd conflicts with /usr/bin/mkpasswd;
    one of these (I think /usr/sbin/mkpasswd but other opinions are valid)
    should probably be renamed.  In any case, mkpasswd.8 from this package
    needs to be installed. (problem #823)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - updated the spec file
  - updated the patch so that new accounts created on shadowed system won't
    confuse pam_pwdb anymore ('!!' default password instead on '!')
  - fixed a bug that made useradd -G segfault
  - the check for the ut_user is now patched into configure


author: Erik Troan <ewt@redhat.com>
changelog:
  - added patch for XOPEN oddities in glibc headers
  - check for ut_user before checking for ut_name -- this works around some
    confusion on glibc 2.1 due to the utmpx header not defining the ut_name
    compatibility stuff. I used a gross sed hack here because I couldn't make
    automake work properly on the sparc (this could be a glibc 2.0.99 problem
    though). The utuser patch works fine, but I don't apply it.
  - sleep after running autoconf


author: - Bastien Nocera <bnocera@redhat.com> - 0.19-5.el5
changelog:
  - Re-add Real Player as the default handler for mime-types it knows
    best, as otherwise the selection is semi-random
  - Resolves: #250980


author: - Bastien Nocera <bnocera@redhat.com> - 0.19-4.el5
changelog:
  - Remove totem as a handler for RealVideo types, as HelixPlayer is
    a better player for those in RHEL
  - Resolves: #250980


author: Dan Williams <dcbw@redhat.com> - 0.16-3
changelog:
  - Update OpenOffice.org desktop file names. #155353
  - WordPerfect default now OOo Writer, since Abiword is in Extras


author: David Zeuthen <davidz@redhat.com> - 0.16-2
changelog:
  - Make Evince the default for application/pdf and application/postscript
  - Remove remaining references to gnome-ggv (application/x-gzpostscript and
    image/x-eps) as this is no longer in the distribution


author: Peter Vrabec <pvrabec@redhat.com> 1.5a65-1
changelog:
  - upgrade 1.5a65-1 made by Horst H. von Brand <vonbrand@inf.utfsm.cl>
  - Source URL changed, no homepage now
  - License changed from GPL to CDDL 1.0
  - Define MAKEPROG=gmake like the Gmake.linux script does
  - Disable fat binary as per star/Makefile, update star-1.5-selinux.patch for
    the various *.mk files used in that case
  - Axe /usr/share/man/man1/match.1*, /usr/etc/default/rmt too
  - Explicit listing in %files, allow for compressed or plain manpages


author: Donnie Barnes <djb@redhat.com>
changelog:
  - ALRIGHT!  Woo-hoo!  Erik already did the install-info stuff!
  - added BuildRoot
  - spec file cleanups


author: Miroslav Lichvar <mlichvar@redhat.com> - 2.0.6-1
changelog:
  - update to slang-2.0.6
  - move .so.2 link to main package
  - don't package static library and utf8 link
  - remove requires for libtool and libtermcap
  - rearrange doc files (#191583)


author: Petr Raszyk <praszyk@redhat.com> - 2.0.5-5
changelog:
  - A patch by Bill Nottingham <notting@redhat.com>
    (#174761). slang-LANG.patch
    slang reads automatically sh-env-variable LANG.


author: Troy Dawson <dawson@fnal.gov> 5x-1-6.SL
changelog:
  - Updated gpg keys to include sl and sl5
  - Updated download server list to include ftp1.scientificlinux.org


author: Troy Dawson <dawson@fnal.gov> 5x-1-4.SL
changelog:
  - Added comments in yum.conf for installonlyn
  - Changed flash.repo to adobe.repo
  - Changed repo's to use http first, and then try ftp


author: Troy Dawson <dawson@fnal.gov> - 5.SL
changelog:
  - Fixed startup bug for real this time.
  - Added check for cell
  - Added check so user can say if they want it to start on boot or not


author: Chris Feist <cfeist@redhat.com> - 0.1.5-1
changelog:
  - gnbd now uses the deadline scheduler by default.
  - Sending requests after a send has failed is now disallowed.
  - The gnbd kernel module on 64 bit architectures now handles ioctls from 32
    bit userspace processes.
  - Related: rhbz#442606 rhbz#449812 rhbz#440454


author: Chris Feist <cfeist@redhat.com> - 0.1.3-2
changelog:
  - Now requires kABI rather than specific kernel (code from
    jcm@redhat.com)
  - Resolves: rhbz#212428


author: Jindrich Novy <jnovy@redhat.com> 0.9.8.1-5
changelog:
  - apply official bugfix patches (#164363)
    - fixes slrnpull problem with group containing no headers
    - fixes last character removal editor problem


author: Jindrich Novy <jnovy@redhat.com> 0.9.8.1-3
changelog:
  - package contrib subdir because of slrn-conv script (#73451)
  - slrnpull.conf is now %config(noreplace), original config
    won't be overwritten (#56001)
  - include slrnpull man page


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7.4-6
changelog:
  - configure with --with-ssl-includes=%{_includedir} and
    --with-ssl-library=%{_libdir}, for multilib systems


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 0.9.6.4
  - enable SSL
  - plug some possible buffer overflows (#12750)
  - install sample macros in /usr/lib/slrn


author: Manoj Kasichainula <manojk+rpm@io.com>
changelog:
  [0.9.5.3-2]
  - Fixed a couple of stupid things I did.
  - Took out -fno-strength-reduce. AFAIK, gcc on RH5.1 doesn't have this bug. I
    use egcs which shouldn't have this bug. And if you have this bug, *and* are
    recompiling on your own machin, you should have -fno-strength-reduce in your
    RPM_OPT_FLAGS anyway.


author: Manoj Kasichainula <manojk+rpm@io.com>
changelog:
  - docs are now forced to 644 to prevent including /bin/sh as a requirement
  - added macros in the doc directory
  - should now be buildable by non-root


author: Manoj Kasichainula <manojk+rpm@io.com> (0.9.4.3-2)
changelog:
  - Fixes from JED
  - default mode for slrnpull posts set to 0640, so slrnpull can read it as
    non-root
  - lots of pre-setup for slrnpull
    - directories set up
    - automatic daily expiration
    - moved slrnpull directory to /var/spool/slrnpull, to match (most) docs
    - more 
  - minor spec file changes


author: Troy Dawson <dawson@fnal.gov> - 1.1-1
changelog:
  - Changed the way /usr/lib/rpm/macros is edited to make it umask friendly
    Patch for the change was submitted by Dr. Andrew C. Aitchison


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.38-1
changelog:
  - upgrade to 5.38
  - fix #438556 - upgrade request
  - fix #456471 - SELinux prevents smartd from monitoring 3ware RAID


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.36-4
changelog:
  - fix #232168 - wrong exit status of the init script
  - fix #326551 - smartctl hangs the system when run on PERC controller


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-3.1
changelog:
  - set cloexec on device descriptor so it doesn't leak to sendmail (#214182)
  - fixed minor bug in initscript (#213683)
  - backported SATA disk detection from upstream


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-2
changelog:
  - kudzu is deprecated, replace it with HAL (#195752)
  - moved later in the boot process so haldaemon is already running
    when drives are being detected


author: Tomas Mraz <tmraz@redhat.com> - 1:5.33-5
changelog:
  - add default /etc/sysconfig/smartmontools file
  - ignore errors on startup (#186130)
  - test drive for SMART support before adding it to smartd.conf


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-3
changelog:
  - add libata disks with -d ata if the libata version
    is new enough otherwise do not add them (#145859, #174095)


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-2
changelog:
  - Spec file cleanup by Robert Scheck <redhat@linuxnetz.de> (#170959)
  - manual release numbering
  - remove bogus patch of non-installed file
  - only non-removable drives should be added to smartd.conf
  - smartd.conf should be owned (#171498)


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.62
changelog:
  - Always log plugin exceptions that are not raised to the interpreter
    Resolves: bz717480
  - Ensure relative symlink targets are correctly handled when copying
    Resolves: bz717962
  - Correctly handle libxml2 parser exceptions when reading cluster.conf
    Resolves: bz750573
  - Update Red Hat Certificate System plugin for current versions
    Resolves: bz627416


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.61
changelog:
  - Make single threaded operation default and add --multithread to override
    Resolves: bz708346
  - Support multiple possible locations of VRTSexplorer script
    Resolves: bz565996
  - Collect wallaby dump and inventory information in mrggrid plugin
    Resolves: bz641020


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.60
changelog:
  - Add ethtool pause, coalesce and ring (-a, -c, -g) options to network plugin
    Resolves: bz726421
  - Update MRG grid plugin to collect additional logs and configuration
    Resolves: bz641020


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.59
changelog:
  - Fix collection of symlink destinations when copying directory trees
    Resolves: bz717962
  - Allow plugins to specify non-root symlinks for collected command output
    Resolves: bz716987
  - Ensure custom rsyslog destinations are captured and log size limits applied
    Resolves: bz717167


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.58
changelog:
  - Add basic plugin for Veritas products
    Resolves: bz565996
  - Do not collect subscription manager keys in general plugin
    Resolves: bz750606
  - Fix gfs2 plugin use of callExtProg API
    Resolves: bz667783


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.55
changelog:
  - Add basic Infiniband plugin
    Resolves: bz673246
  - Add plugin for scsi-target-utils iSCSI target
    Resolves: bz677123
  - Fix handling of TMP environment variable
    Resolves: bz733133
  - Correctly determine kernel version in cluster plugin
    Resolves: bz742567
  - Add libvirt plugin
    Resolves: bz568635
  - Add gfs2 plugin to supplement cluster data collection
    Resolves: bz667783


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.51
changelog:
  - Add support for collecting entitlement certificates
    Resolves: bz678666
  - Collect non-standard syslog and rsyslog log files
    Resolves: bz596970
  - Fix up2dateclient path in hardware plugin
    Resolves: bz572353
  - Add plugin to collect rsyslog configuration
    Resolves: bz548616
  - Collect /etc/sysconfig/selinux in SELinux plugin
    Resolves: bz674717
  - Fix parted and dumpe2fs output on s390
    Resolves: bz645507
  - Truncate files that exceed specified size limit
    Resolves: bz636472


author: Bryn M. Reeves <bmr@redhat.com> - 1.7-9.50
changelog:
  - Update cluster plugin for group_tool and lockdump changes
    Resolves: bz584060
  - Fix satellite and proxy package detection in rhn plugin
    Resolves: bz590389
  - Add plugin to collect certificate system and pki data
    Resolves: bz635966


author: Adam Stokes <ajs at redhat dot com> - 1.7-9.49
changelog:
  - Resolves: bz499468 sos detect invalid fence domain IDs
  - Resolves: bz507672 capture dm-raid information
  - Resolves: bz521344 include dump of openais configuration
  - Resolves: bz530385 sosreport copies all files from a relative directory link, possibly
  - Resolves: bzcopying unwanted directories
  - Resolves: bz499472 sos detect and report on cluster infrastructure when domain status invalid
  - Resolves: bz502442 There is a goes-back issue for sosreport
  - Resolves: bz507674 sosreport: one or more nfs export do not have a fsid attribute set
  - Resolves: bz516551 sosreport -k general.syslogsize=15 doesn't work
  - Resolves: bz478009 To add a sosplugin to collect soundcard related information
  - Resolves: bz479111 To add a sosplugin to collect lsb_release information
  - Resolves: bz482755 list of installed rpms is in non-std. format
  - Resolves: bz485191 Sos plugin to Collect Quagga configuration files
  - Resolves: bz485559 sos-patch to include /var/spool/cron information in system.py
  - Resolves: bz495934 Need to grab cobbler stuff in sos
  - Resolves: bz497588 sosreport mangles passwords in cluster.conf, breaking XML
  - Resolves: bz512889 sosreport to capture iscsi initiator settings if present.
  - Resolves: bz514294 include multicast information
  - Resolves: bz523263 sosreport captures the contents of /tftpboot.
  - Resolves: bz453151 sosreport enhancement
  - Resolves: bz443984 SOSreport does not gather SELinux audit logs 
  - Resolves: bz530385 copying unwanted files from symlink
  - Resolves: bz557851 capture qppid information


author: Adam Stokes <ajs at redhat dot com> - 1.7-9.27
changelog:
  - Resolves: bz433040 sosreports are too large, due to /var/log/httpd
  - Resolves: bz444839 FC device state information is omitted
  - Resolves: bz450997 gdm plugin
  - Resolves: bz460140 capture "dmesg" output
  - Resolves: bz460788 can not distinguish FV guests
  - Resolves: bz461351 smartcard related details
  - Resolves: bz462824 chkconfig test in cluster plugin fails on systems with non-US locale
  - Resolves: bz469626 sar plugin
  - Resolves: bz472857 plugin to collect snmp configurations
  - Resolves: bz472858 plugin for kdump configuration
  - Resolves: bz487308 Sos plugin to collect oddjob related details
  - Resolves: bz487628 Sos plugin to collect openssl related details
  - Resolves: bz488412 Sos plugin to collect wvdial and ppp related details
  - Resolves: bz503536 sosreport fails on minimal install without bzip2 installed
  - Resolves: bz238778 Add 'lspci -t' to set of lspci commands run
  - Resolves: bz466923 [sosreport] printing.py update needed
  - Resolves: bz480786 rhn plugin for sos should change paths according to recent monitoring change
  - Resolves: bz487113 /var/log/acpid is missed in SOS
  - Resolves: bz487116 plugin to collect nscd information
  - Resolves: bz487119 Patch to collect tftp related information
  - Resolves: bz487466 Add iscsi plugin to sos.
  - Resolves: bz487470 Add ntpdata plugin for sos.
  - Resolves: bz487474 tomcat5 plugin
  - Resolves: bz487476 Auditd related information
  - Resolves: bz487477 DHCP related information
  - Resolves: bz487478 Red Hat Hardware Test Suite related information
  - Resolves: bz487480 udev related information
  - Resolves: bz487481 PXE related information
  - Resolves: bz487482 VMWare related information
  - Resolves: bz487483 process accounting related information
  - Resolves: bz487484 MySQL related information
  - Resolves: bz487485 MRG Messaging related information
  - Resolves: bz487488 MRG GRID related information
  - Resolves: bz492072 sosreport does not include /var/log/pm/suspend.log
  - Resolves: bz497840 Unused snack import
  - Resolves: bz498474 sort output of installed-rpms 
  - Resolves: bz501842 sosreport is missing batch mode
  - Resolves: bz503172 Need to know the default version of jre
  - Resolves: bz476970 [RHEL5] 'sosreport -av' crashed Oracle RAC node
  - Resolves: bz461798 include Certificate system 7.1 plugin in sosreport
  - Resolves: bz461799 Addition of Directory Server sos plugins
  - Resolves: bz464207 postfix plugin for sos name does not fit naming convention
  - Resolves: bz464208 NEW sosreport plugin for dovecot.
  - Resolves: bz466819 plugin to add netconfig configuration to sosreport
  - Resolves: bz466947 add IPA plugin to sosreport
  - Resolves: bz469365 sosreport French translation of y/n prompt is wrong
  - Resolves: bz469820 sosreport should collect the result of ethtool -i,-k,-S
  - Resolves: bz472108 Anaconda plugin
  - Resolves: bz480302 Python sys.path problem
  - Resolves: bz475190 sos modifes ldap.conf
  - Resolves: bz475991 sosreport shouldn't require user input when plug-in diagnoses (potential) error
  - Resolves: bz477042 rh-upload-core does not upload unless the quiet flag is set
  - Resolves: bz487416 sosplugin to collect the details on cron including the system and user cron jobs
  - Resolves: bz487434 A sosplugin to gather the details on logrotate such as its status, its debug information and the configuration files.
  - Resolves: bz490186 xen plugin: is_running_xenstored function issues
  - Resolves: bz497206 FEAT: Add -kvm target for s.o.s report


author: Adam Stokes <astokes at redhat dot com> - 1.7-9.11
changelog:
  - Resolves: bz459845 collect krb5.conf
  - Resolves: bz457880 include output of xm list and xm list --long
  - Resolves: bz457919 add support for openswan and ipsec-tools


author: Adam Stokes <astokes at redhat dot com> - 1.7-9.6
changelog:
  - Resolves: bz445947 sysreport.legacy reports Cannot make temp dir
  - Resolves: bz452705 Add /root/anaconda-ks-cfg to sosreport archive
  - Resolves: bz445510 Do not rely on env to execute python
  - Resolves: bz386691 Need unattended way to run sosreport


author: Adam Stokes <astokes at redhat dot com> - 1.7-9.4
changelog:
  - Resolves: bz447890 regular expression error in hardware plugin
  - Resolves: bz446868 add support for emc devices
  - Resolves: bz453797 fails to generate fdisk -l
  - Resolves: bz433183 does not collect ext3 information
  - Resolves: bz444838 systool is passed deprcated arguments
  - Resolves: bz455096 add %{INSTALLTIME:date} to rpm --qf collection


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-7
changelog:
  - Resolves: bz251927 SOS errata needs to be respin to match 4.6 code base
  - added extras/rh-upload-core script from David Mair <dmair@redhat.com>


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-6
changelog:
  - more language fixes
  - added arabic, italian and french
  - package prepared for release
  - included sysreport as sysreport.legacy


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-5
changelog:
  - package obsoletes sysreport and creates a link pointing to sosreport
  - added some commands in cluster and process plugins
  - fixed html output (wrong links to cmds, thanks streeter)
  - process: back down sleep if D state doesn't change
  - Resolves: bz241277 Yum Plugin for sos
  - Resolves: bz247520 Spelling mistake in sosreport output
  - Resolves: bz247531 Feature: plugin to gather initial ramdisk scripts
  - Resolves: bz248252 sos to support language localization
  - Resolves: bz241282 Make SOS for RHEL 4


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-4
changelog:
  - catch KeyboardInterrupt when entering sosreport name
  - added color output for increased readability
  - list was sorted twice, removing latter .sort()


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-3
changelog:
  - added preliminary problem diagnosis support
  - better i18n initialization
  - better user messages
  - more progressbar fixes
  - catch and log python exceptions in report
  - use python native commands to create symlinks
  - limit concurrent running threads


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-1
changelog:
  - split up command outputs in sub-directories (sos_command/plugin/command instead of sos_command/plugin.command)
  - fixed doExitCode() calling thread.wait() instead of join()
  - curses menu is disabled by default
  - multithreading is enabled by default
  - major progressbar changes (now has ETA)
  - multithreading fixes
  - plugins class descriptions shortened to fix better in --list-plugins
  - rpm -Va in plugins/rpm.py sets eta_weight to 200 (plugin 200 longer than other plugins, for ETA calculation)
  - beautified command output filenames in makeCommandFilename()


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.7-0
changelog:
  - curses menu disabled by default (enable with -c)
  - sosreport output friendlier to the user (and similar to sysreport)
  - smarter plugin listing which also shows options and disable/enabled plugins
  - require root permissions only for actual sosreport generation
  - fix in -k where option value was treated as string instead of int
  - made progressbar wider (60 chars)
  - selinux plugin is enabled only if selinux is also enabled on the system
  - made some errors less verbose to the user
  - made sosreport not copy files pointed by symbolic links (same as sysreport, we don't need /usr/bin/X or /sbin/ifup)
  - copy links as links (cp -P)
  - added plugin get_description() that returns a short decription for the plugin
  - guess sosreport name from system's name


author: Navid Sheikhol-Eslami <navid at redhat dot com> - 1.6-1
changelog:
  - Beautified output of --list-plugins.
  - GPL licence is now included in the package.
  - added python-devel requirement for building package
  - Resolves: bz241282 fixed incompatibility with python from RHEL4


author: Steve Conklin <sconklin at redhat dot com> - 1.4-1
changelog:
  - Fixed an error in option handling
  - Forced the file generated by traceroute to not end in .com
  - Fixed a problem with manpage
  - Added optional traceroute collection to networking plugin
  - Added clalance's patch to gather iptables info.
  - Fixes to the device-mapper plugin
  - Fixed a problem with installation of man page


author: Steve Conklin <sconklin at redhat dot com> - 1.3-3
changelog:
  - including patches to fix the following:
  - Resolves: bz219745 sosreport needs a man page
  - Resolves: bz219667 sosreport does not terminate cleanly on ^C
  - Resolves: bz233375 Make SOS flag the situation when running on a fully virtu...
  - Resolves: bz234873 rhel5 sos needs to include rpm-va by default
  - Resolves: bz219669 sosreport multi-threaded option sometimes fails
  - Resolves: bz219671 RFE for sosreport - allow specification of plugins to be run
  - Resolves: bz219672 RFE - show progress while sosreport is running
  - Resolves: bz219673 Add xen information gathering to sosreport
  - Resolves: bz219675 Collect information related to the new driver update model
  - Resolves: bz219877 'Cancel' button during option selection only cancels sele...


author: Steve Conklin <sconklin at redhat dot com> - 1.1-1
changelog:
  - Tighten permissions of tmp directory so only readable by creator bz_219657
  - Don't print message 'Problem at path ...'  bz_219654
  - Removed useless message bz_219670
  - Preserve file modification times bz_219674
  - Removed unneeded message about files on copyProhibitedList bz_219712


author: John Berninger <jwb at redhat dot com> - 0.1-3
changelog:
  - Added ftp, ldap, mail, named, samba, squid SOS plugins
  - Fixed various errors in kernel and hardware plugins


author: Matthias Clasen <mclasen@redhat.com> - 2.16.0-3
changelog:
  - Backport a number of fixes from 2.16.2 (216821, 216823,
    216824, 216825, 216826, 216828, 216829, 216830)


author: John (J5) Palmieri <johnp@redhat.com> 2.9.91-2
changelog:
  - Reenabled BuildRequires for hal-devel >= 0.5.0
  - Added (Build)Requires for nautilus-cd-burner(-devel) >= 2.9.6


author: Colin Walters <walters@redhat.com> 0.5.14-1
changelog:
  - New upstream
  - This release fixes corruption on re-read, upstream 153085
  - Remove upstreamed sound-juicer-0.5.13-prefs-crash.patch


author: Colin Walters <walters@redhat.com> 0.5.12-1
changelog:
  - New upstream version 0.5.12
  - Delete upstreamed patch sound-juicer-0.5.9-pref-help.patch
  - Delete upstreamed patch sound-juicer-0.5.10-gstreamer.patch
  - Delete call to autoconf


author: Brent Fox <bfox@redhat.com> 0.5.2-2
changelog:
  - spec file cleanups
  - add exclude arch for ia64, x86_64, ppc64, and s390x
  - add %file macros 
  - remove Requires for gstreamer-cdparanoia and gstreamer-vorbis


author: Thomas Woerner <twoerner@redhat.com> 12.17.7-3
changelog:
  - fixed bad link for man/man1/rec.1.gz (#154089)
  - using /usr/include instead of kernel-devel includes


author: Bill Nottingham <notting@redhat.com> 12.17.4-1
changelog:
  - update to 12.17.4
  - ship soxmix (#102499)
  - fix soxplay to handle files with spaces (#91144)
  - use LFS (#79151)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix rec manpage link - now that man pages are compressed, it should point to
    play.1.gz, not play.1


author: Warren Togami <wtogami@redhat.com>
changelog:
  - Options for RHEL4
      * spamc/spamd cannot connect over IPv6 or SSL
      * sa-update is disabled
    The above functionality requires perl modules not included in RHEL4.
    You may still use them if you get those perl modules from elsewhere.
    RHEL5 ships these perl modules.


author: Warren Togami <wtogami@redhat.com> - 3.0.2-9
changelog:
  - SA#4191 uri_to_domain() is broken for urls with empty port
    SA#4232 multipart message with 0 parts -> uninitialized in m//
    SA#4121 Score for user defined rules become ignored
    SA#3944 get_envelope_from not handling received header


author: Warren Togami <wtogami@redhat.com> - 3.0-svn20040530
changelog:
  - svn snapshot 20040530
  - #124870 prevent service startup failure due to old -a option
  - #124871 more docs
  - #124872 unowned directories


author: Warren Togami <wtogami@redhat.com> - 3.0-svn20040524
changelog:
  - #123432 do not start service by default
  - #122488 remove CRLF's
  - #123706 correct license
  - svn snapshot 20040524
  - svn snapshot 20040518


author: Ville Skyttä <ville.skytta at iki.fi> - 2.63-8
changelog:
  - #122233
  - Require perl(:MODULE_COMPAT_*).
  - Use %{_mandir} and %{_initrddir}.
  - Fix License tag and include License in docs.
  - Backslashify multiline init script description.


author: Warren Togami <wtogami@redhat.com> 2.62-3
changelog:
  - Ville Skyttä's fixes from #113596 including:
  - Fix buildroot traces
  - enable openssl
  - Trailing slash to DESTDIR (bug 90202 comment 14).
  - export optflags so they're honored, affects spamc only.


author: Warren Togami <wtogami@redhat.com> 2.62-2
changelog:
  - upgrade to 2.62
  - Prereq -> Requires, former is deprecated
  - Require current version of perl
  - Remove urban myth clean test
  - TODO: Get rid of prefix


author: Tim Powers <timp@redhat.com> 2.43-6
changelog:
  - don't use rpms internal dep generator
  - buildrequire perl-Time-HiRes instead of perl(Time:HiRes) so we can satisfy build deps in the build system


author: Chip Turner <cturner@redhat.com>
changelog:
  - better control of service level, improvement in %post script.
  - (contribs from schirmer@taytron.net)


author: Theo Van Dinter <felicity@kluge.net>
changelog:
  - Updated for 2.20 release
  - made /etc/mail/spamassassin a config directory so local.cf doesn't get wiped out
  - added a patch to remove findbin stuff


author: Theo Van Dinter <felicity@kluge.net>
changelog:
  - Updates for 2.01 release
  - Fixed rc file
  - RPM now buildable as non-root
  - fixed post_service errors
  - fixed provides to include perl modules
  - use file find instead of manually specifying files


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 3.1.1-13
changelog:
  - Manual.pdf - file permissions corrected.
  - Included a demo .splintrc file as doc (splintrc.demo == src/.splintrc).


author: Paul Nasrat <pnasrat@redhat.com> - 3.3.6-1
changelog:
  - Update to 3.3.6
  - Fix typo  (#189647)
  - Enable threading fixes (#181298)
  - Conditionalize static library


author: Michal Hlavinka <mhlavink@redhat.com> - 1.4.8-5.11
changelog:
  - fix: CVE-2010-1637 : Port-scans via non-standard POP3 server ports in 
    Mail Fetch plugin
  - fix: CVE-2010-2813 : DoS (disk space consumption) by random IMAP login 
    attempts with 8-bit characters in the password
  - fix: CVE-2010-4554 : Prone to clickjacking attacks
  - fix: CVE-2010-4555 : Multiple XSS flaws
  - fix: CVE-2011-2023 : XSS in <style> tag handling
  - fix: CVE-2011-2752 : CRLF injection vulnerability
  - fix: CVE-2011-2753 : CSRF in the empty trash feature and in Index Order page


author: Michal Hlavinka <mhlavink@redhat.com> - 1.4.8-5.4
changelog:
  - fix: CVE-2009-1581 : CSS positioning vulnerability
  - fix: CVE-2009-1579 : Server-side code injection in map_yp_alias username map
  - fix: CVE-2009-1578 : Multiple cross site scripting issues


author: Michal Hlavinka <mhlavink@redhat.com> - 1.4.8-5.1
changelog:
  - don't transmit cookies under non-SSL connections if the session
    is started under an SSL (https) connection
  - Resolves: CVE-2008-3663, #468398
  - fix release number with respect to Z-stream nvr policy


author: Warren Togami <wtogami@redhat.com> 1.4.7-1
changelog:
  - 1.4.7 with CVE-2006-3174
  - Reduce patch for body text (#194457)
  - Better JP translation for "Check mail" (#196117)


author: Warren Togami <wtogami@redhat.com> 1.4.6-8
changelog:
  - Japanese zenkaku subject conversion      (#196017)
  - Japanese MSIE garbled download ugly hack (#195639)
  - Japanese multibyte attachment view text  (#195452)
  - Japanese multibyte attachment body text  (#194457)
  - Do not convert Japanese Help to UTF-8    (#194599)


author: David Woodhouse <dwmw2@redhat.com> 1.4.6-1
changelog:
  - Upgrade to 1.4.6 proper for CVE-2006-0377 CVE-2006-0195 CVE-2006-0188
  - Script the charset changes instead of using a patch
  - Convert the ko_KR files to UTF-8, dropping invalid characters from
    what's theoretically supposed to be EUC-KR in the original.


author: David Woodhouse <dwmw2@redhat.com> 1.4.6-0.cvs20050812.2
changelog:
  - Convert all locales to UTF-8 instead of legacy character sets to
    work around bug #162852. Except for ko_KR, because iconv doesn't
    believe its help files are actually in EUC-KR as claimed.


author: Warren Togami <wtogami@redhat.com> 1.4.6-0.cvs20050812.1
changelog:
  - snapshot of 1.4.6 because 1.4.5 upstream was a bad release
    this hopefully will also work on PHP5 too...


author: Warren Togami <wtogami@redhat.com> 1.4.4-2
changelog:
  - 1.4.4
  - re-include translations and Provide squirrelmail-i18n
    better compatible with upstream, but we cannot split sub-package
    due to support of existing distributions
  - remove unnecessary .po files


author: Warren Togami <wtogami@redhat.com> 1.4.3a-5
changelog:
  - default_folder_prefix dovecot compatible by default
    /etc/squirrelmail/config_local.php if you must change it


author: Warren Togami <wtogami@redhat.com> 1.4.3a-4
changelog:
  - HIGASHIYAMA Masato's patch to improve Japanese support
    (coordinated by Scott A. Hughes).
  - real 1.4.3a tarball


author: Warren Togami <wtogami@redhat.com> 1.4.3-2
changelog:
  - #125638 config_local.php and default_pref in /etc/squirrelmail/
    to match upstream RPM.  This should allow smoother drop-in
    replacements and upgrades.
  - other spec cleanup.


author: Gary Benson <gbenson@redhat.com> 1.2.10-4
changelog:
  - fix syntax error in download.php (#82600).
  - resized splash screen to be the same size as the one it replaces
    (#82790)
  - remove piece of squirrelmail-1.2.10-xss.patch that changed the
    version from '1.2.10' to '1.2.11 [cvs]'


author: Gary Benson <gbenson@redhat.com> 1.2.7-3
changelog:
  - get rid of long lines in the specfile.
  - remove symlink in docroot and use an alias in conf.d instead.
  - work with register_globals off (#68669)


author: Gary Benson <gbenson@redhat.com> 1.2.7-1
changelog:
  - hardwire the locations into the config file and cron file.
  - install squirrelmail-cleanup.cron as squirrelmail.cron.
  - make symlinks relative.
  - upgrade to 1.2.7.
  - more dependency fixes.


author: Gary Benson <gbenson@redhat.com>
changelog:
  - summarize the summary, fix deps, and remove some redundant stuff.
  - tidy up the prep section.
  - replace directory definitions with standard RHL ones.


author: Ray Strode <rstrode@redhat.com> 0.8-3
changelog:
  - change to new modular X dependencies
  - move configure to build instead of prep
  - use make install DESTDIR=$RPM_BUILD_ROOT instead of
    
    /usr/bin/make \
  	prefix=/var/tmp/startup-notification-root/usr \
  	exec_prefix=/var/tmp/startup-notification-root/usr \
  	bindir=/var/tmp/startup-notification-root/usr/bin \
  	sbindir=/var/tmp/startup-notification-root/usr/sbin \
  	sysconfdir=/var/tmp/startup-notification-root/etc \
  	datadir=/var/tmp/startup-notification-root/usr/share \
  	includedir=/var/tmp/startup-notification-root/usr/include \
  	libdir=/var/tmp/startup-notification-root/usr/lib \
  	libexecdir=/var/tmp/startup-notification-root/usr/libexec \
  	localstatedir=/var/tmp/startup-notification-root/var \
  	sharedstatedir=/var/tmp/startup-notification-root/usr/com \
  	mandir=/var/tmp/startup-notification-root/usr/share/man \
  	infodir=/var/tmp/startup-notification-root/usr/share/info \
    install


author: Fernando Nasser <fnasser@redhat.com> - 0:1.2.9-3jpp.1
changelog:
  - Merge with upstream for upgrade to 1.2.9
  - Use symlinks instead of actual files in WEB-INF/lib folders
  - Add conditional native compilation


author: Fernando Nasser <fnasser@redhat.com> - 0:1.2.9-3jpp
changelog:
  - Remove duplicate macros
  - Fix removal of old struts-el documentation link
  - Create coreonly option


author: Kaj J. Niemi <kajtzu@fi.basen.net> - 0:1.1-2jpp
changelog:
  - Fixed runtime requires
  - Fix examples by making symlinks work in their respective (sub-)directories,
    the template comes for tomcat4 from Source #2 and for tomcat5 from Source #3


author: Kaj J. Niemi <kajtzu@fi.basen.net> - 0:1.1-1jpp
changelog:
  - Updated to 1.1
  - Use tomcat4 real webapps dir instead of -compat provided app dir
  - To compile against < JDK 1.4 jdkmajorver needs to be set to 1.3


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.0.2-1jpp
changelog:
  - 1.0.2
  - generic servlet support
  - distinct webapps for tomcat3 and tomcat4
  - no duplicate files for webapps
  - correct file ownership for webapps


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.0-4jpp
changelog:
  - section macro
  - versioned dir for javadoc
  - no dependencies for manual and javadoc packages
  - stricter dependencies for webapp package
  - requires tomcat3
  - no more requires servlet3 as tomcat3 requires it
  - requires and buildrequires xalan-j2 >= 2.2.0
  - adaptation to new servlet3 package
  - adaptation to new xalan-j2 package
  - adapation to new tomcat3 package
  - uncompressed webapps


author: Miloslav Trmač <mitr@redhat.com> - 4.15-2.el5.1
changelog:
  - Fix "protocol = smtp"
    Resolves: #284801
  - Use a clearer error message if an unknown port is specified
    Resolves: #450344


author: Miloslav Trmac <mitr@redhat.com> - 4.11-1
changelog:
  - Update to stunnel-4.11
  - Fix int/size_t mismatches in stack_info ()
  - Update Certificate-Creation for /etc/pki


author: Nalin Dahyabhai <nalin@redhat.com> 3.20-1
changelog:
  - log using LOG_AUTHPRIV facility by default (#47289)
  - make permissions on stunnel binary 0755
  - implicitly trust certificates in %{_datadir}/ssl/trusted (#24034)


author: Nalin Dahyabhai <nalin@redhat.com> 3.19-1
changelog:
  - update to 3.19 to avoid problems with stunnel being multithreaded, but
    tcp wrappers not being thrad-safe


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove explicit requirement on openssl (specific version isn't enough,
    we have to depend on shared library version anyway)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 3.11
  - chuck the SIGHUP patch (went upstream)
  - chuck parts of the 64-bit clean patch (went upstream)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move to Applications/Internet group
  - clean up %post script
  - make stunnel.pem %ghost %config(noreplace)
  - provide a sample file for use with xinetd


author: Joe Orton <jorton@redhat.com> 1.3.2-2
changelog:
  - update to 1.3.2
  - fix Ruby sitelibdir (Garrick Staples, #191611)
  - own /etc/subversion (#189071)
  - update to psvn.el r19857


author: Joe Orton <jorton@redhat.com> 1.2.3-3
changelog:
  - update to 1.2.3
  - update to psvn.el r16070 from Stefan Reichoer
  - merge subversion.conf changes from RHEL4
  - merge filter-requires.sh changes from FC4 updates


author: Joe Orton <jorton@redhat.com> 1.2.0-3
changelog:
  - update to 1.2.1
  - fix BuildRequires for ruby and apr-util (#163126)
  - drop static library archives


author: Joe Orton <jorton@redhat.com> 1.1.3-8
changelog:
  - further swig bindings fix (upstream via Max Bowsher, #151798)
  - fix perl File::Path dependency in filter-requires.sh


author: Joe Orton <jorton@redhat.com> 1.1.3-7
changelog:
  - restore swig bindings support (from upstream via Max Bowsher, #141343)
  - tweak SELinux commentary in default subversion.conf


author: Joe Orton <jorton@redhat.com> 1.0.2-2
changelog:
  - add perl MODULE_COMPAT requirement for -perl subpackage
  - move perl man pages into -perl subpackage
  - clean up -perl installation and dependencies (Ville Skyttä, #123045)


author: Joe Orton <jorton@redhat.com> 1.0.0-2
changelog:
  - add fix for lack of apr_dir_read ordering guarantee (Philip Martin)
  - enable compression in ra_dav by default (Tobias Ringström)


author: Jeff Johnson <jbj@redhat.com> 0.22.2-2
changelog:
  - use external neon-0.23.9-2 (i.e. with neon-config), drop internal neon.
  - use db-4.1.25, not db-4.0.14.
  - do "make check" (but ignore failure for now).
  - s390x knows not of httpd >= 2.0.45.


author: Joe Orton <jorton@redhat.com> 0.22.2-1
changelog:
  - update to 0.22.2; add mod_dav_svn subpackage
  - include Python bindings
  - neon: force use of expat, enable SSL
  - drop check for specific apr version added in -3


author: Jeff Johnson <jbj@redhat.com> 0.15-3687.0
changelog:
  - first build from adapted spec file, only client and libraries for now.
  - internal apr/apr-utils/neon until incompatibilities sort themselves out.
  - avoid libdir issues on x86_64 for the moment.


author: Daniel Kopecek <dkopecek@redhat.com> - 1.7.2p1-11
changelog:
  - backported selinux support from 1.7.4p5 (#477185, #673157)
  - fixed bug in Runas_Spec group matching (#627543)
  - disable `sudo -l' output word wrapping if the output
    is piped (#697111)
  - fixed overwriting of errno after execve failure (#673157)
  - fixed segmentation fault (#673072)
  - add a sudoers entry to the nsswitch.conf file
    on install (and delete it on uninstall) (#617061)
    Resolves: rhbz#697111
    Resolves: rhbz#673157
    Resolves: rhbz#673072
    Resolves: rhbz#627543
    Resolves: rhbz#617061
    Resolves: rhbz#477185


author: Daniel Kopecek <dkopecek@redhat.com> - 1.7.2p1-10
changelog:
  - fixed regression in the sudoers parser (#580438)
  - merged .loopsegv3 and .includedir patches into .580438 patch
  - generated new toke.c from toke.l using flex (needed by #580438)
  - added !visiblepw with comment to sudoers
  - added ChangeLog, WHATSNEW and sudoers.ldap.5*
  - removed *.pod files
  - fixed printing of entries with multiple host entries on a single line (#603819)
  - fixed audit related code in configure.in (#583683)
  - removed unused patches
  - fixed a typo in the sudoers man-page (#602022)
    Resolves: rhbz#580438
    Resolves: rhbz#583911
    Resolves: rhbz#583644
    Resolves: rhbz#603819
    Resolves: rhbz#583683
    Resolves: rhbz#602022


author: Daniel Kopecek <dkopecek@redhat.com> - 1.7.2p1-7
changelog:
  - added patch that fixes insufficient environment sanitization issue (#598154)
    Resolves: rhbz#598382


author: Daniel Kopecek <dkopecek@redhat.com> 1.7.2p1-1
changelog:
  - rebase to 1.7.2p1
    Resolves: #469653
    Resolves: #497873
    Resolves: #500942
    Resolves: #512191
    Resolves: #519017
    Resolves: #521778
    Resolves: #521903
  - sudo-1.7.2p1-negation.patch, don't apply negation to an already
    negated Cmnd_Alias member. Backported from upstream development
    version of sudo.
    Resolves: #453045


author: Daniel Kopecek <dkopecek@redhat.com> 1.6.9p17-4
changelog:
  - audit patch rediff (one chunk failed to apply due to fuzz=0)
  - Fix for incorrect handling of groups in Runas_User (#481720)
    Resolves: #481821


author: Peter Vrabec <pvrabec@redhat.com> 1.6.9p17-1
changelog:
  - rebase 1.6.8 -> 1.6.9
  - patches from F10
  - compiled with secure path(80215)
  - patches for sudoers file provided by sudo are removed,
    because we deliver our own sudoers in sources1
  - compiled without selinux support since there was no 
    selinux support in previous release
    Resolves: #447408


author: Peter Vrabec <pvrabec@redhat.com> 1.6.8p12-11
changelog:
  - fix segfaults when using ldap on s390,
    Resolves: #305331
  - add audit support,
    Resolves: #320671


author: Karel Zak <kzak@redhat.com> 1.6.8p12-7
changelog:
  - fix #198755 - make login processes (sudo -i) initialise session keyring
    (thanks for PAM config files to David Howells)
  - add IPv6 support (patch by Milan Zazrivec)


author: Dan Walsh <dwalsh@redhat.com> 1.6.8p12-3
changelog:
  - Remove selinux patch.  It has been decided that the SELinux patch for sudo is
  - no longer necessary.  In tageted policy it had no effect.  In strict/MLS policy
  - We require the person using sudo to execute newrole before using sudo.


author: Karel Zak <kzak@redhat.com> 1.6.8p9-1
changelog:
  - new version 1.6.8p9 (resolve #161116 - CAN-2005-1993 sudo trusted user arbitrary command execution)


author: Colin Walters <walters@redhat.com> 1.6.7p5-24
changelog:
  - Enhance sesh.c to fork/exec children itself, to avoid
    having sudo reap all domains.
  - Only reinstall default signal handlers immediately before
    exec of child with SELinux patch


author: Nalin Dahyabhai <nalin@redhat.com> 1.6.6-2
changelog:
  - remove absolute path names from the PAM configuration, ensuring that the
    right modules get used for whichever arch we're built for
  - don't try to install the FAQ, which isn't there any more


author: Karsten Hopp <karsten@redhat.de> 1.3.23-1
changelog:
  - update
  - new pylib patch
  - remove destdir patch, swig.m4 is no longer included
  - remove ldconfig patch, swig now uses *-config to find out linker options


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use %{_tmppath} instead of /var/tmp
  - remove the postscript docs (pdftops from the xpdf pkg converts them just fine)


author: Tim Waugh <twaugh@redhat.com> 0.7.32.10-1
changelog:
  - 0.7.32.10:
    - Don't call populateList() after saving printer, just update the
      printer we changed.  This prevents a GTK+ crash (bug #229474).


author: Tim Waugh <twaugh@redhat.com> 0.7.32.9-1
changelog:
  - 0.7.32.9:
    - Fixed Forward button sensitivity when Back pressed (bug #217516).
    - Don't pre-select make and model when not discoverable
      (bug #217522).
    - Fixed typo in show_HTTP_Error (bug #217538).
    - Fixed hex digits list in percentDecode (bug #224140).
    - Driver existence check improvements (part of bug #227662).
    - Fixed traceback in driver existence check (part of bug #227662).
    - Driver existence check: give up if there are HTML entities
      (bug #227662).
    - Prevent username/password loss when applying changes
      (bug #227663).
    - Handle unknown job options (bug #227678).
    - Case-insensitive Device ID matching (part of bug #228506).
    - Preserve case in debug output (part of bug #228506).
    - Fixed logic for matching against Device ID (part of
      bug #228506).
    - Handle applying changes in the correct place (bug #229474).
    - Reconnect to CUPS when needed (bug #229861).
    - Delete button should not be sensitive for remote queues
      (bug #250387).
    - Fixed SMB browsing problem (bug #452853).
    - Fixed expandability of servers in the SMB browser (part of
      bug #452853).
    - Decrease minimum width of window (bug #229473).
    - Moved widgets around to avoid window being too wide (part of
      bug #229473).


author: Tim Waugh <twaugh@redhat.com> 0.7.32.5-1
changelog:
  - 0.7.32.5:
    - Added as, kn, mr, or, si and te to ALL_LINGUAS (bug #217879).
    - Fixed traceback with PCL printer (bug #219144).


author: Tim Waugh <twaugh@redhat.com> 0.7.32.3-1
changelog:
  - 0.7.32.3:
    - Make PPD NickName selectable (bug #215926).
    - Don't set button widths in create-printer dialog (bug #217025).


author: Tim Waugh <twaugh@redhat.com> 0.7.32.2-1
changelog:
  - Update desktop database (bug #213251).
  - pycups 1.9.15:
    - Handle enum values already set outside the range (bug #214021).
    - Connection.getJobs/cancelJob (bug #215058).
  - 0.7.32.2:
    - Check that drivers exist (bug #212533).
    - Find '.PPD' files (bug #213224).
    - Fixed invisible_char (bug #213261).
    - Fixed using the new PPD as-is (bug #213401).
    - Fixed auto-selected of current PPD when changing it (bug #213668).
    - Sort 'Other' last in the devices list (bug #213678).
    - Fixed A4/Letter problems (bug #213681).
    - Refresh after applying changes (bug #213694).
    - Gutenprint/Gimp-Print PPD fixes (bug #213863).
    - Handle database errors gracefully (bug #213993).
    - Handle Boolean values with 'On' and 'Off' as choices (bug #214021).
    - Handle invalid printers.conf file gracefully (bug #214156).
    - Only match against description when it is valid (bug #214178).
    - Handle bogus HPLIP Device IDs (bug #214435).
    - Parse 'ieee1284' and 'ppd-device-id' strings and add to look-up
      table (bug #214765).
    - Scrolling fixes (bug #214954).
    - Allow user to cancel test pages (bug #215058).
    - Set busy cursor when changing PPD or device (bug #215528).
    - Duplicate PPDs fix (part of bug #214963).
    - Match against command set (bug #215744).
    - Merge CUPS and foomatic manufacturers that differ in case (bug #215747).
    - Better PPD information display (bug #215751).


author: Tim Waugh <twaugh@redhat.com> 0.7.32-1
changelog:
  - Updated to pycups-1.9.13 for HTTP_FORBIDDEN.
  - 0.7.32:
    - Handle HTTP errors during connection (bug #208824).
    - Updated translations (bug #208873).


author: Tim Waugh <twaugh@redhat.com> 0.7.31-1
changelog:
  - 0.7.31:
    - Select recommended driver automatically (bug #208606).
    - Better visibility of driver list (bug #203907).


author: Tim Waugh <twaugh@redhat.com> 0.7.7-2
changelog:
  - Ship PAM and userhelper files.
  - Requires usermode.
  - Added missing options.py file.
  - Fix getClasses() in pycups.


author: Tim Waugh <twaugh@redhat.com> 0.7.7-1
changelog:
  - Updated to system-config-printer-0.7.7.
  - Updated to pycups-1.9.9.
  - Desktop file.
  - Requires PyXML.


author: Than Ngo <than@redhat.com> - 4.0.8-7
changelog:
  - Resolves: #513600, [kn_IN][te_IN] switchdesk fails to start in kn_IN/te_IN locale
  - Resolves: #521285, fix shebang line of system Python executables


author: Than Ngo <than@redhat.com> 4.0.4-1
changelog:
  - fix wrong RB id of enlightenment which causes switchdesk crashed #124408
  - fix bug in setting default wm, bug #124292, #122260
  - fix bug in creating .Xclients, bug #123545
  - add selection button for System Default #110312


author: Than Ngo <than@redhat.com> 4.0.0-1
changelog:
  - 4.0.0 release
  - fixed #40226, #71711, #71990, #72744, #75751, #78603, #81801, #84043, #85077, #89347, #105880, #108582, #109683, #110312, #114190

  - Thu Jun 26 2003 Than Ngo <than@redhat.com> 3.9.8-18
  - build with gcc-3.3-12
  - fix desktop file issue
  - cleanup specfile
  - disable debuginfo


author: Mike A. Harris <mharris@redhat.com> 3.9.8-11
changelog:
  - Changed ./configure to rpm %configure macro so libdir is set right on x86_64
  - More prefix/share -> /usr/share fixes, removal of {prefix}, and usage of
    {_prefix} instead
  - Changed make install to %makeinstall macro


author: Mike A. Harris <mharris@redhat.com> 3.9.8-10
changelog:
  - Changed all occurances of {prefix}/foo to proper RPM macros and other spec
    file cleanups
  - Fix for unpackaged files in buildroot detected by new rpm policy


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - desktop-file (#69506)
  - fix wmaker (#65303)
  - sync with cvs
  - remove acconfig.h from CVS, it creates a config.h 
    with invalid deklarations
  - fix comments in switchdesk-gnome.c
  - fix CXXFLAGS in src/Makefile.am


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed switchdesk-helper script, and cleaned up manpage so we don't
    refer to AnotherLevel etc (#31142)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Handle KDE 2.0 (Bug #20371)
  - Make the desktop names for the textmode frontend case insensitive
  - Add Swedish translation to Desktop file (RFE #15362)
  - Add German translation to Desktop file
  - Fix up help text when neither switchdesk-kde nor switchdesk-gnome is
    installed
  - Fix up %description - we support WindowMaker, fvwm and twm.
  - Add the missing Xclients.fvwm file


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add docs for the KDE2 switch on command line (Bug #16743)
  - Fix crash in switchdesk-gnome (Bug #16743)
  - fix some minor oddities


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - add enlightenment, twm, windowmaker to gnome version, remove AnotherLevel
  - fix build with current KDE 2.0
  - stop using egcs++
  - fix a number of bugs
  - ExcludeArch ia64 for now (kdelibs doesn't compile there)


author: Paul Nasrat <pauln@truemesh.com> - 0:0.12.3-0.fdr.1
changelog:
  - Revert to imakefile and XFree86-sdk
  - Include missing sdk headers - push upstream
  - don't build synclient and syndaemon for now


author: Peter Vrabec <pvrabec@redhat.com> - 1.4.1-45
changelog:
  - include a newline when logging to tty
  - syslogd keeps writing messages to /dev/console after an EINTR in syscall
  - fixing memory leak 
  - man page fixes
    Resolves: #490897, #506683, #481600, #471174, #460232


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-33
changelog:
  - fix bug 166643: klogd needs to use internal syslog functions in syslog.c,
                    because only they allow logging with facility==kernel.
  		  Fix prototypes to allow use of internal syslog functions.


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-31
changelog:
  - fix bug 62679:  give initscript a reload option
  - fix bug 78371:  make syslogd's umask configurable in sysconfig/syslog
  		  with initscript SYSLOG_UMASK option


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-30
changelog:
  - fix bug 158205: fix MARK message generation
                    Patch contributed by Ray Van Tassle of Motorola


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-28
changelog:
  - Fix bug 152319: potential ctime() deadlock in domark() when called
  -                 from signal handler


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-25
changelog:
  - Fix bug 144084 - bad version of '@host' name checking code
  - used by mistake + memory corruption caused by free of
  - addrinfo node returned by getaddrinfo().


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-24
changelog:
  - Do not allow hostnames that resolve to the address of a local
  - interface to be used for forwarding, else syslogd gets into
  - an infinite loop sending messages to itself (as reported by
  - Chuck Mead <csm@redhat.com>).


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-23
changelog:
  - Allow SIGALRM to interrupt system calls, as syslogd expects.
  - In Fedora Core, signal(SIGALRM,...) uses SA_RESTART; one is
  - required to use siginterrupt() to get interruptable system calls.
  - (#140983)


author: Bill Nottingham <notting@redhat.com> 1.4.1rh-7
changelog:
  - don't *require* logrotate, but conflict with older versions
  - fix fd leak of System.map (#52901)
  - switch to -x for klogd by default; we have kksymoops
  - provide LSB facility


author: Bill Nottingham <notting@redhat.com>
changelog:
  - require a specific version of logrotate (#50794)
  - fix %preun for the case when it's not running (#50123)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - adapt /etc/sysconfig/syslog for specification of arbitrary options (#23171)
  - fix translation string slightly (#24088)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't set owner/group on manpages on install
  - read /etc/sysconfig/syslog if present for some configuration paramters
  - fix build with new kernel headers


author: Bill Nottingham <notting@redhat.com>
changelog:
  - handle bad directories passed to '-a' without behaving strangely (#10363)
  - remove compatibility chkconfig links


author: Donnie Barnes <djb@redhat.com>
changelog:
  - added status|restart support to syslog.init
  - added chkconfig support
  - various spec file cleanups


author: David Cantrell <dcantrell@redhat.com> - 3.11-3
changelog:
  - Remove com32/include/time.h and com32/include/sys/times.h
  - Replace CLK_TCK macros with CLOCKS_PER_SEC


author: Peter Jones <pjones@redhat.com> - 3.06-1
changelog:
  - update to 3.06 , which should fix the directory parsing bug that wedges it
    with diskboot.img
  - change README to README* in doc, to include README.menu and README.usbkey


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - lss16toppm and ppmtolss16 are both perl scripts... turn off find-requires
    so we don't suck in perl as a dependency for syslinux


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - update to 1.75
  - include tools to create graphical image format needed by syslinux
  - include isolinux 
  - include pxelinux (#64942)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %{_tmppath}
  - change application group (Applications/Internet doesn't seem
    right to me)
  - added BuildRequires


author: Ivana Hutarova Varekova <varekova@redhat.com> - 7.0.2-11
changelog:
  - Related: #716959                                                                                                                                                                                             
    fix cve-2007-3852 - sysstat insecure temporary file usage


author: Ivana Hutarova Varekova <varekova@redhat.com> - 7.0.2-8
changelog:
  - Resolves: #694767
    iostat doesn't report statistics for shares with long names
  - Related: #703095
    iostat -n - values in output overflows - problem with long device names on
    i386


author: Ivana Hutarova Varekova <varekova@redhat.com> - 7.0.2-5
changelog:
  - Resolves: #604637
    extraneous newline in iostat report for long device names
  - Resolves: #630559
    'sar -P ALL -f xxxx' does not display activity information
  - Resolves: #591530
    add cifsiostat tool
  - Resolves: #598794
    Enable parametrization of sadc arguments
  - Resolves: #675058
    iostat: bogus value appears when device is unmounted/mounted
  - Resolves: #622557
    sar interrupt count goes backward


author: Ivana Hutarova Varekova <varekova@redhat.com> - 7.0.2-4
changelog:
  - Resolves: #454617
    Though function write() executed sucessful, sadc end with an error
  - Resolves: #468340
    The output of sar -I ALL/XALL is wrong in ia64 machine of RHEL5
  - Resolves: #517490
    The 'sar -d ' command outputs invalid data
  - Resolves: #578929
    March sar data was appended to February data
  - Resolves: #579409
    The sysstat's programs such as mpstat shows one extra cpu
  - Resolves: #484439
    iostat -n enhancement not report NFS client stats correctly


author: Ivana Varekova <varekova@redhat.com> - 7.0.2-2
changelog:
  - Resolves: #451626
    switch off SMP_RACE option
  - Resolves: #458811
    fix -I problems on ia64 machine
  - Resolves: #369981
    add two extended nfs fields


author: Ivana Varekova <varekova@redhat.com> - 7.0.2-1
changelog:
  - Resolves: #223138 
    update to 7.0.2
  - Resolves: #243307
    problem with empty debuginfo package
  - Resolves: #369951
    too much open files
  - Resolves: #229760
    add hotplug CPU support
  - Resolves: #236934
    sar command exits with "realloc: Success" 
    see 7.0.0-7.0.1 changelog
  - Resolves: #177540
    add option to iostat which emables it to show 
    the registered device names for device mapper devices


author: Charles Bennett <ccb@redhat.com> 5.0.5-5.fc
changelog:
  - bring in filename and append-msg patch
  - append-msg adds verbose text for when saNN data file cpu count
  -  does not match cpu count on the currently running system


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - version 5.0.5
  - remove some obsolete patches
  - update statreset, overrun, lib64init patches
  - renumber patches


author: Alan Cox <alan@redhat.com>
changelog:
  - Fix spew of crap to console at startup
  - Fix order of startup (#124035)
  - Fix array overrun (#117182)
  - Fix interrupt buffer sizing (caused bogus irq info)


author: Nils Philippsen <nphilipp@redhat.com> 5.0.0-0.6
changelog:
  - let user configure how long to keep logs through /etc/sysconfig/sysstat
    (#81294)
  - reset stats at system boot (#102445)


author: Nils Philippsen <nphilipp@redhat.com> 5.0.0-0.4
changelog:
  - fix insecure tmp files in scripts (#78212)
  - require tools needed in scripts
  - use IFNAMSIZ from /usr/include/linux/if.h for maximum interface length


author: Trond Eivind Glomsrød <teg@redhat.com> 4.0.3-2
changelog:
  - Do the daily sa2 run just before midnight, not at 4AM... you'd 
    only get 4 hours worth of data that way (#63132)


author: Trond Eivind Glomsrød <teg@redhat.com> 4.0.2-1
changelog:
  - 4.0.2
  - the kernel patch for extended statistics is in, don't say it needs
    applying in the man page


author: Preston Brown <pbrown@redhat.com>
changelog:
  - Summarize previous day's activity with sa2, not current day (which is only 4 hours of data when it gets run) (#24820)
  - upgrade to 3.3.4 for full 2.4 compatibility and improved iostat


author: Preston Brown <pbrown@redhat.com>
changelog:
  - make sure disk accounting is enabled to fix iostat -l, -p (#16268)
  - crontab entries were missing the user (root) to run as (#18212)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - packaged for Winston
  - change va patch to indicate kernel is not patched for iostat accounting.
    re-enable if our stock kernel gets this patch.
  - upgrade to 3.2.
  - install crontab entry.


author: Jaroslav Reznik <jreznik@redhat.com> - 4.0.3-5
changelog:
  - Resolves: #462846 - modal dialog refuses to die
  - Resolves: #511864 - parse include statements within view clause


author: Jaroslav Reznik <jreznik@redhat.com> - 4.0.3-4
changelog:
  - Resolves: #449306 - rpm should require bitmap-fonts
  - Resolves: #443731 - error in dialog message
  - Resolves: #248901 - help manual insists to install PDF reader
  - Resolves: #323161 - s-c-b doesn't handle rndc.key file


author: Radek Brich <radek.brich@redhat.com> - 4.0.3-3
changelog:
  - fix #253310 - allow subdomain delegation
  - fix #289561 - error while trying to use saved Named ACls
  - fix #323291 - delegation-only zone creation


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-42
changelog:
  - Handle named.conf 'include' statements within clauses 
    e.g. 'view x { include "y"; }'
  - Tooltip text not gettext-ized (part of fix for bug 195001)


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-40
changelog:
  - fix bug 184065: prompts to place slave / DDNS updateable zone
                    files in slaves/ 
  - ship updated translations


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-33
changelog:
  - fix bug 175420: traceback when named.conf included a nonexistent file
  - fix bug 176142: ship updated Serbian translation


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-32
changelog:
  - fix bug 174284: Lookup.py failed when hostname matches IP
  		  address regexps and has no DNS record


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-31
changelog:
  - fix deletion of record with following records for same name
  - fix zone serial increment on save
  - ship updated translations


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-30
changelog:
  - fix IPv6 address labelling
  - fix reverse IP zone origin selection menus for A & AAAA records
    when there are forwarder reverse IP zones
  - remove CVS directories mistakenly included in previous versions


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-22
changelog:
  - fix bug 165292: missing 'key' keyword in ACL named keys
  - workaround ISC bug 15195: named cannot handle multiple keys in rndc.key


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-21
changelog:
  - fix bug 164245: generate desktop file from translations in .po files
  - fix bug 164613, 164611: translated string typos
  - further fix for bug 158438: sentence splitting


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-20
changelog:
  - fix bug 164129: DNS.py 'declartation' -> 'declaration'
  - fix bug 163937: NamedConfOptions 'Name of ke.' -> 'Name of key.'
  - fix bug 158438: avoid sentence splitting in translatable messages


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-18
changelog:
  - fix bug 163304: handle empty contents in Zone.out
  - fix bug 161988: create links to .mo files for bindconf
  - fix bug 161987: don't use substring of translated string in DNSsec TrustedKeys
  - fix bug 159534: add descriptions to deprecated record types
  - fix bug 158441: shorten NamedConfOptions description strings


author: Jason Vas Dias <jvdias@redhat.com> - 4.0.0-16
changelog:
  - fix out-of-zone data reporting
  - out-of-zone string comparison should be case-insensitive
  - fix bug 156913: wrong file permissions for config files


author: Lon Hohberger <lhh@redhat.com> 1.0.57-7
changelog:
  - Add support for __max_restarts, __restart_expire_time,
      orainstance and oradatabase resources, Cisco MDS, Cisco
      UCS, and RHEV fencing agents.
    - Fix previous changelog entry
    - Resolves: rhbz#520866


author: Lon Hohberger <lhh@redhat.com> 1.0.57-5
changelog:
  - Fix failure to parse logging tags / out of date cluster.ng
    - Obsoletes previous patches for 474177, 476260, 4889057, 517140,
      and 53017
    - Resolves: rhbz520866


author: Ryan McCabe <rmccabe@redhat.com> 1.0.57-4
changelog:
  - Fix bz546747 (system-config-cluster does not populate ip correctly when you edit the ip resource with no subnet mask)


author: Ryan McCabe <rmccabe@redhat.com> 1.0.57-3
changelog:
  - Fix Red Hat bugzilla tickets: 352631 436939 474155 476260 488957 491798 515443 517140 520866 530171


author: Jim Parsons <jparsons@redhat.com> 1.0.21-1
changelog:
  -  Some gui fixups, support for file system IDs, and some exposure of a few additional rgmanager params


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.13-1
changelog:
  -  Fixes for bz161344, 160264, 160127, 163673, 163237, 160240, 164407, 159965, 165130, 165140, 161974, 165169, 164936, 165184, 164857, 166663, 166140, and validation of IP addresses.


author: Jim Parsons <jparsons@redhat.com> 0.9.17-1
changelog:
  - Fixes for bz149123, 149885, 149660, 149508, 149488, 149897,
      150895, 150813, 149124, 149662, 149128, 149508, 149545, 149707


author: Jim Parsons <jparsons@redhat.com> 0.9.12-1
changelog:
  - Fixes for bz149897, 149123, 149124, 149674, 149676, 149761, 149269, 149670.
      Also added in Service Creation dialog panel.


author: Jim Parsons <jparsons@redhat.com> 0.9.5-1
changelog:
  - Many fixes and completions. Added check boxes for restricted
      and ordered failover domains. Added properties for fences.
      Fixed bug in fence devices section. Added support for GULM
      in UI.


author: Nils Philippsen <nphilipp@redhat.com> 1.8.11
changelog:
  - provide more info when encountering bad timezone translations (i.e. not split
    into Region,Continent/Location) (#219773)
  - pick up updated translations (#216073)


author: Nils Philippsen <nphilipp@redhat.com> 1.8.8
changelog:
  - enable Hebrew, Marathi and Urdu translations
  - pick up updated translations (#211074)
  - add dist tag


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.14
changelog:
  - put Etc/... timezones into "Non-geographic timezones" (#148025)
  - default to already set timezone on startup (#177815)


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - fix highlighted regions when leaving and entering the timeone map canvas
  - make timezone list a treeview
  - update timezone po source file


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.8
changelog:
  - reshow shaded map when reentering map widget from outside
  - clear status line when outside region area in zoomed mode


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.7
changelog:
  - only select region if pointer is inside region
  - replace aa-based shading to avoid aa-related deficiencies of GnomeCanvas
  - show shaded border around zoomed in region to zoom out without selecting a
    city


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.6
changelog:
  - fix zooming problems with enlarged window (#172982)
  - apply workaround by Alex Larsson to avoid hanging when clicking on Asia
    region (#172977)
  - add Middle America region, make Antarctica regions overlapping


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.2
changelog:
  - write comment about the ZONE parameter into /etc/sysconfig/clock (#123101)
  - handle comments when reading /etc/sysconfig/clock
  - consistently use spaces for indentation in timezoneBackend.py


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.0
changelog:
  - add and edit NTP servers inline in the list
  - always display clock left-to-right (#165109)
  - try to be smart about restrict lines when changing or deleting hosts
  - include *.pyo files (#165097)
  - don't remove *.pyc files in %preun because they're in the file list
  - don't include timetool symlink anymore
  - don't install firstboot module symlink, this is dealt with in the firstboot
    package for quite a while


author: Nils Philippsen <nphilipp@redhat.com> 1.7.18
changelog:
  - make desktop file translatable (#156792)
  - avoid DeprecationWarnings
  - use DESTDIR consistently (#156782)


author: Nils Philippsen <nphilipp@redhat.com> 1.7.16-2
changelog:
  - use True, False instead of gtk.TRUE, gtk.FALSE to avoid deprecation warnings
    (#153037, patch by Colin Charles)


author: Nils Philippsen <nphilipp@redhat.com> 1.7.9-1
changelog:
  - enable choosing which notebook page(s) to show (for firstboot, #133748)
  - some minor firstboot API changes, conflict with firstboot <= 1.3.26
  - some minor UI tweaks
  - remove pool.ntp.org from list of NTP server choices as system-config-date
    doesn't handle multi-IP machines really well ATM


author: Nils Philippsen <nphilipp@redhat.com> 1.7.5-1
changelog:
  - actually display time zone map (#131641)
  - put NTP stuff into own tab to better accommodate firstboot (#131314)
  - add accelerators to Date & Time tab


author: Brent Fox <bfox@redhat.com> 1.5.9-9
changelog:
  - Added mnemonics to widgets that didn't have them (bug #91026)
  - convert some timezone po files to utf-8 (bug #88461)


author: Brent Fox <bfox@redhat.com> 1.5.7-3
changelog:
  - better check on ntp status by looking at initscrip return code
  - sent ntp initscript output to /dev/null when calling os.system()


author: Brent Fox <bfox@redhat.com> 1.5.6-2
changelog:
  - handle missing ntpservers file
  - don't pass in parent, it breaks firstboot
  - handle busted ntp initscript


author: Brent Fox <bfox@redhat.com> 1.5.2-7
changelog:
  - Retrieve the only the first NTP server if there's more than one
  - Only modify the first server entry if there's more than one


author: Tammy Fox <tfox@redhat.com> 1.4-1
changelog:
  - Updated docs for gtk2 interface
  - Add note about security level and ntpd (bug #68039)
  - Move desktop file to /usr/share/applications only


author: Brent Fox <bfox@redhat.com> 1.3-4
changelog:
  - Remove some lingering references to dateconfig
  - Create symbolic link from dateconfig to redhat-config-date


author: Brent Fox <bfox@redhat.com> 1.3-1
changelog:
  - Rename dateconfig to redhat-config-date
  - Check to see if we can ping ntp server before starting ntpd


author: Brent Fox <bfox@redhat.com>
changelog:
  - Finished port to Python2.2/GTK2
  - Handle starting ntpd more gracefully
  - Made variable naming more consistent


author: Brent Fox <bfox@redhat.com>
changelog:
  - Replaced C code for timezone map with Python from anaconda
  - Remove timezonemapmodule from /usr/lib/dateconfig


author: Trond Eivind Glomsrød <teg@redhat.com> 0.7.4-6
changelog:
  - Fix some character sets for translations (#52851)
  - dateconfig.png isn't a config file, mark the config files as noreplace


author: Brent Fox <bfox@redhat.com>
changelog:
  - got starting and stopping of ntpd working
  - enabled detection of whether ntpd is currently running 
  - added msf to author list


author: Adam Jackson <ajax@redhat.com> 1.0.48-4
changelog:
  - scd-1.0.48-nv-dualhead.patch: Disable dualhead UI for nv driver (#430579)
  - scd-1.0.48-dualhead-force.patch: Fix enabling dualhead, clicking OK, not
    selecting a monitor, and clicking OK again (#755542)
  - Remove bizarre preun scriptlet (#771740)


author: Adam Jackson <ajackson@redhat.com> 1.0.45-1
changelog:
  - Refresh the mode state before first paint, to give rhpxl a chance to ask
    RANDR for the current mode.


author: Adam Jackson <ajackson@redhat.com> 1.0.43-1
changelog:
  - Drop 8bpp support.
  - Simplify monitor selection view.
  - Fix initial window sizing to be large enough for all fields.


author: Bill Nottingham <notting@redhat.com> 1.0.41-1
changelog:
  - adjust to new rhpxl (<clumens@redhat.com>)
  - work with newer, sparser, config files
  - when dealing with autoprobed monitors, pull current resolution from randr


author: Mike A. Harris <mharris@redhat.com> 1.0.11-1
changelog:
  - Change Requires: XFree86 to Requires: /usr/X11R6/bin/XFree86, which is
    what it appears from the sources is being called.  That will need to change
    when the server gets renamed, so it should be implemented IMHO in a way
    that is not hard coded.  This should suffice for now however.
  - Changed package description to remove "XFree86" name and replace it with
    generic "X Window System X server" term.
  - Added the "via", and "voodoo" drivers that were missing to internal driver
    list in videocardDialog.py.  The list is still missing stuff though, but
    those sprung to mind.
  - Added force-tag target to Makefile with tag -cF
  - Added tag target without -F to Makefile
  - Removed -F from archive target as that can potentially blow away an already
    tagged and released version from the repository if someone accidentally
    does a "make archive" without updating the spec file Version: field like
    I just about did.  ;o)


author: Brent Fox <bfox@redhat.com> 1.0.1-1
changelog:
  - rename from redhat-config-xfree86 to system-config-display
  - add Obsoletes for redhat-config-xfree86
  - make changes for Python2


author: Brent Fox <bfox@redhat.com> 0.7.5-1
changelog:
  - turn on horizontal scrolling in videocard window
  - initialize dpi measurement option menu correctly (bug #90190)


author: Brent Fox <bfox@redhat.com> 0.7.1-2
changelog:
  - fix the dialog centering code
  - connect the resolution menu to update_ui so the screenshot gets refreshed


author: Brent Fox <bfox@redhat.com> 0.7.0-6
changelog:
  - default to us keyboard if /etc/sysconfig/keyboard contains a keyboard unknown to rhpl (bug #80993)


author: Brent Fox <bfox@redhat.com> 0.7.0-4
changelog:
  - call mouse.read() if probing didn't return a valid DEVICE info (bug #80115)
  - import string in videocardDialog.py
  - pass hardware_state into VideocardDialog


author: Brent Fox <bfox@redhat.com> 0.7.0-2
changelog:
  - made some ui cleanups that keeps the dialog from resizing while changing resolutions
  - removed all the autoconf stuff and replaced it with simpler Makefile and spec file
  - rebuild for completeness


author: Alexander Larsson <alexl@redhat.com> 0.6.0-1
changelog:
  - Add 640x480 to list of resolutions
  - Kluge around treeview horizontal scroll bug in videocard dialog
  - set textdomain everywhere it is needed to make i18n work
  - Try --reconfig if starting an xserver with the current config file doesn't work.
  - Tell gdm to restart server on logout after we write the config file.


author: Phil Knirsch <pknirsch@redhat.com> - 5:1.3.3.3-1.el5
changelog:
  - Added missing gettext buildrequires
  - Fixed the XSLT httpd.conf file to be compatible with httpd-2.2 and newer


author: Phil Knirsch <pknirsch@redhat.com> 1.3.3-1
changelog:
  - Rewrote XSLT backend to use libxslt-python instead of 4Suite
  - Fixed wrongly claimed "file has been manually modified" for fresh 1st run
    (#167633)
  - Updated pam config file to latest pam recommendation (#170629)


author: Phil Knirsch <pknirsch@redhat.com> 1.3.2-2
changelog:
  - Fixed the KeepAlive bug that was already fixed as errata for RHEL3 (#137815)
  - Fixed use of True and False instead of gtk.TRUE and gtk.FALSE (#153039)
  - Fixed traceback when no X-server is running
  - Fixed problem with ServerSignature setting (#156639)
  - Removed static /manual alias from httpd.conf template (#144239)
  - Updated gtk.mainloop() and gtk.mainquit() to new API names
  - Added pa translation file (#157826)


author: Phil Knirsch <pknirsch@redhat.com> 1.2.1-1
changelog:
  - Fixed problem with Error documents for non English languages (#115220)
  - Removed deprecated SSLLog and SSLLogLevel parameters (#115221)
  - Fixed SSL stuff (#115223)
  - Fixed not well-formed XSLT file (#119849)
  - Obsoletes redhat-config-httpd (#124106)
  - system-config-httpd docdir now is owned by package (#125750)


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed gnome.url_show() call for help pages (#110128).
  - Updated httpd.conf.xsl to latest httpd package (#107539).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Include HIG patch from Jens Knutson and fixed remaining problems with it.
  - Really added Crotatin and a few other languages this time (#106601).


author: Phil Knirsch <pknirsch@redhat.com> 1.1.0-5
changelog:
  - Fixed problem with Allow from and Deny from (double from).
  - Included Croation translation (#106601).
  - Big change in 4Suite requires fix for the Xslt processing.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-16
changelog:
  - Fixed absolute symlink for config files.
  - Fixed problem with startup error message without X11.
  - Fixed AllowOverride problem.
  - Fixed Listen parameter handling.
  - Fixed Allow and Deny parameter handling.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-10
changelog:
  - Fixed missing Alias entry in XSLT conversion file (#71423).
  - Fixed wrong menu entry (apacheconf instead of redhat-config-httpd) (#71424).


author: Trond Eivind Glomsrød <teg@redhat.com> 0.8.1-1
changelog:
  - don't install desktop files in the kontrol-panel directory, it 
    now reads the standard location as well (#52719)
  - nn and no summaries in .desktop files were switched
  - Fix character set for es.po, pt.po and it.po
  - The COPYING filed listed as a doc-file weren't present in the tree
  - Mark various configuration files as %config


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-7
changelog:
  - Added symlink to redhat-config-apache for tool nameing compatibility.
  - Fixed typo in po/pt_BR.po that prevented doing a make dist.


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-4/3
changelog:
  - Fixed not working directory options removal (#45160)
  - Fixed missing libglade-devel build prereq (#44725)
  - Fixed missing ServerAlias entries in vhosts (#44320)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-3/2
changelog:
  - Fixed some autofoo issues in Makefile.am, specfile and autogen.sh 
  - Fixed Bugzilla bug #40004 (small typo in src/ApacheControl.py)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-2/1
changelog:
  - Added the Epoch: tag to avoid update problems with previous versions.
  - Added a nice srpm feature in the Makefile.am with which we can now easily
    make SRPMS directly from CVS (borrowed from the kernel CVS Makefile ;)


author: Dave Lehman <dlehman@redhat.com> 1.0.14-1.el5
changelog:
  - require bitmap-fonts
    Resolves: rhbz#433858
  - make sure translations containing format specifiers are found
    Resolves: rhbz#314341


author: Dave Lehman <dlehman@redhat.com> 1.0.13-1.el5
changelog:
  - handle kdump service start/stop
    Resolves: rhbz#239324
  - only suggest reboot if memory reservation altered
    Related: rhbz#239324
  - preserve unknown config options
    Resolves: rhbz#253603
  - add 'halt' default action
    Related: rhbz#253603


author: Dave Lehman <dlehman@redhat.com> 1.0.12-1.el5
changelog:
  - prompt user for a PAE kernel for 32-bit xen with >4G memory (Jarod Wilson)
    Resolves: rhbz#284851


author: Dave Lehman <dlehman@redhat.com> 1.0.10-1.el5
changelog:
  - handle ia64 bootloader correctly
    Resolves: #220231
  - align memory requirements with documented system limits
    Resolves: #228711


author: Dave Lehman <dlehman@redhat.com> 1.0.7-1.el5
changelog:
  - rework memory constraints for increased flexibility (#215990)
  - improve consistency WRT freezing/thawing of widgets (#215991)
  - update translations (#216596)


author: Dave Lehman <dlehman@redhat.com> 1.0.5-1.el5
changelog:
  - fix install make target to specify modes where needed
  - remove unnecessary %preun
  - various specfile fixes to appease rpmlint


author: Dave Lehman <dlehman@redhat.com> 1.0.4-1
changelog:
  - all location types now in combo box (no text entry for type)
  - preserve comment lines from kdump.conf instead of writing config header
  - add hicolor icon from Diana Fong


author: Dave Lehman <dlehman@redhat.com> 1.0.2-1
changelog:
  - add support for "core_collector" and "path" handlers
  - give choices of "ssh" and "nfs" instead of "net"
  - validate results of edit location dialog
  - add choice of "none" to default actions
  - remove "ifc" support since it's gone from kexec-tools
  - update kdump config file header
  - fix a couple of strings that weren't getting translated


author: Dave Lehman <dlehman@redhat.com> 1.0.1-1
changelog:
  - Fix bugs in writeDumpConfig and writeBootloaderConfig
  - Fix handling of pre-existing "ifc" and "default" directives
  - Always leave network interface checkbutton sensitive
  - Various minor fixes


author: Brent Fox <bfox@redhat.com> 1.2.1-1
changelog:
  - renamed from redhat-config-keyboard
  - add Obsoletes for redhat-config-keyboard
  - make changes for Python2.3


author: Brent Fox <bfox@redhat.com> 1.0.3-1
changelog:
  - add a us keymap to keymaps with non-latin chars (bug #82440)
  - write out the XkbVariant line if it is present
  - handle XkbOptions to allow toggling between keymaps


author: Brent Fox <bfox@redhat.com> 0.9.2-1
changelog:
  - Wrap the destroy call in a try/except because there is no self.mainWindow in firstboot reconfig mode


author: Chris Lumens <clumens@redhat.com> 2.6.19.7-1
changelog:
  - Don't keep the .desktop file in version control.
    Resolves: rhbz#452780
  - Use the timezone list provided by system-config-date.
    Resolves: rhbz#445194


author: Chris Lumens <clumens@redhat.com> 2.6.19.3-1
changelog:
  - Fix adding partitions under the Auto heading.
    Related: rhbz#305271
  - Don't destroy the save dialog when it's closed.
  - If the key checkbutton is not active, remove the key setting.
    Related: rhbz#226718
  - Handle pykickstart exceptions by popping up a helpful dialog
    Resolves: rhbz#431567
  - Fix typo in LDAP authconfig parameter.
    Related: rhbz#232664


author: Chris Lumens <clumens@redhat.com> 2.6.19.2-1
changelog:
  - Support package selection through the RHN plugin if available (#217165).
  - Fix iterating over partitions (#305271).
  - Add support for handling the registration key (#226718).
  - Add an option to specify the LDAP CA cert (#232664).
  - Set isCrypted to False when the encryption box is unchecked (#239817).
  - Fix a traceback causing package selection to always be disabled (#227969).


author: Chris Lumens <clumens@redhat.com> 2.6.19.1-1
changelog:
  - If package selection is disabled, don't forget whatever was in the
    original kickstart file (#217165).


author: Chris Lumens <clumens@redhat.com> 2.6.18-1
changelog:
  - Don't require a root password (#215190).
  - Disable package screen if yum couldn't download (#216439).


author: Chris Lumens <clumens@redhat.com> 2.6.15-1
changelog:
  - Don't need to be root to run system-config-kickstart (patch from
    Panu Matilainen <Panu.Matilainen@nokia.com>, #211998).


author: Chris Lumens <clumens@redhat.com> 2.6.14-1
changelog:
  - Use updated translations (#210728).
  - Update documentation (#210863).
  - Don't enable yum plugins.
  - Disable popup menu on the package selection screen.


author: Chris Lumens <clumens@redhat.com> 2.6.10-1
changelog:
  - Fix unencrypted root password traceback (#190487).
  - Try harder to get a base repo enabled (#190508).


author: Chris Lumens <clumens@redhat.com> 2.6.4-1
changelog:
  - Convert package selection to using pirut (#178759).
  - Partitioning screen fixes for cciss.
  - Use consolehelper.


author: Chris Lumens <clumens@redhat.com> 2.5.24-1
changelog:
  - Remove mouse and langsupport.  These two options have been removed from
    kickstart so we shouldn't be generating invalid files.
  - Fail if we read a line we don't understand instead of being silent.
  - Deal with drivers instead of cards due to kudzu changes.


author: Chris Lumens <clumens@redhat.com> - 2.5.19-1
changelog:
  - Fixed a segfault in pygtk on the partitioning screen.
  - Fixed RAID editing screen so the config values don't change if you
    repeatedly edit a RAID volume.


author: Chris Lumens <clumens@redhat.com> - 2.5.18-1
changelog:
  - Get package group lists and their translations out of the comps.xml file
    instead of reying on a built-in (and out of date) list.
  - Added an "Install Everything" button (#134679).


author: Chris Lumens <clumens@redhat.com> - 2.5.16-1
changelog:
  - Fix display in indic locale (#138310) and (#138601)
  - Monitor order (#127477)
  - Translation of RAID message (#127687)
  - Unencrypted root passwords (#134678)
  - Broken nfs line parsing (#134681)


author: Brent Fox <bfox@redhat.com> 2.5.11-2
changelog:
  - handle missing mouse line (bug #124341)
  - use N_ instead of _ in packages.py (bug #124144)
  - remove code for dead firewall widgets (bug #124342)


author: Brent Fox <bfox@redhat.com> 2.3.4-2
changelog:
  - rebuild for completeness
  - added some new system profiling code, but it's not exposed in the UI yet


author: Brent Fox <bfox@redhat.com> 2.3.4-1
changelog:
  - Handle opening existing kickstart files
  - Handle multiple ethernet interfaces
  - Don't require rootpassword on upgrades


author: Brent Fox <bfox@redhat.com> 2.3.2-16
changelog:
  - Don't write out --emulthree if No Mouse is selected
  - Fix gtk.glade.bindtextdomain so that the glade screens pull in translations


author: Tammy Fox <tfox@redhat.com> 2.3.2-2
changelog:
  - Updated list of langs
  - Reimplemented keyboard list to use list from rhpl
  - Fix for iter_next change


author: Brent Fox <bfox@redhat.com>
changelog:
  - completed the port to gtk2
  - Fixed bug 65835
  - Fixed bug 66815
  - Fixed bug 64453 (with help from menthos@menthos.com)


author: Tammy Fox <tfox@redhat.com>
changelog:
  - Added optional ftp username and password
  - Added preview menu item
  - Added bootloader --upgrade
  - Added swap --recommended
  - Added %packages -- resolvedeps and %packages --ignoredeps


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added po directory
  - added grub password and initialize the disk label
  - added help manual and function to display it


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added emulate three buttons and probe for mouse options
  - added preview configuration window
  - modified basic.py to use dictionaries to store combo box selections


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added scrollwindow around partition information
  - made all widgets except partition scrollwindow unexpandable so that when the main window is resized only the partition list gets bigger
  - increased release number


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added file dialog box
  - cleaned up code
  - renamed okButton to saveButton in ksconfig.py
  - renamed Cancel button to Exit in interface
  - added /boot to default partition list
  - added menu icon


author: Tom Lane <tgl@redhat.com> 2.2.11-10
changelog:
  - Compile with -fno-strict-aliasing, per rpmdiff complaint.
  - Install icons in /usr/share/pixmaps, not /usr/share/icons as this package
    has historically done; the former is considered correct.  Also per rpmdiff.
  Related: #497016


author: Tom Lane <tgl@redhat.com> 2.2.11-9
changelog:
  - split out libraries into a -libs subpackage, to allow them to be installed
    concurrently with unixODBC64-libs
  Resolves: #497016


author: Tom Lane <tgl@redhat.com> 2.2.11-6
changelog:
  - Patch NO-vs-no discrepancy between aclocal/acinclude and recent autoconf
    versions (not sure if this has been broken for a long time, or was just
    exposed by modular X changeover).
  - Apparently need to require libXt-devel too for modular X.


author: Tom Lane <tgl@redhat.com> 2.2.11-3
changelog:
  - Force update of yac.h because the copy in the distributed tarball does not
    match bison 2.0's numbering of symbols (bz #162676)
  - Include documentation of text-file driver
  - Use private libltdl so we can omit RTLD_GLOBAL from dlopen flags (bz #161399)


author: Tom Lane <tgl@redhat.com> 2.2.11-2
changelog:
  - Remove Makefiles accidentally included in docs installation (bz #168819)
  - Updates to keep newer libtool code from installing itself as part of package


author: Tom Lane <tgl@redhat.com> 2.2.8-4
changelog:
  - Add dependency to ensure kde subpackage stays in sync with main
    (needed because we moved odbctest from one pkg to the other,
    cf bug #122478)
  - rebuilt


author: Fernando Nasser <fnasser@redhat.com> 2.2.5-9
changelog:
  - Add XFree86-devel to the list of BuildPrereq.  Did not bump
    release as there is no need to rebuild.


author: Fernando Nasser <fnasser@redhat.com> 2.2.5-9
changelog:
  - Add comments to the /etc/odbcinst.ini file regarding the proper
    setup for MySQL and the origin of each library needed.


author: Fernando Nasser <fnasser@redhat.com> 2.2.5-4
changelog:
  - Revert previous change and special case libodbcpsql.so and
    libodbcpsqlS.so instead.  Here is the explanation (from Elliot
    Lee):
    ".so files are only used at link time for normal dynamic libraries.
     The libraries referred to here are being used as dynamically loaded
     modules, so I guess moving those particular .so files back to the
     main package would make sense, but the other .so files should stay
     in the devel subpackage."


author: Fernando Nasser <fnasser@redhat.com> 2.2.5-3
changelog:
  - Moved all the shared library symlinks to the main package.
    They were deliberatedly being added to the devel package for
    unknown reasons but this was forcing users to install the 
    devel package always. 
  - No need to special-case libodbc.so anymore


author: Fernando Nasser <fnasser@redhat.com> 2.2.5-1
changelog:
  - Moved odbctest to the kde package to remove require on Qt stuff
    from the main package.
  - Removed stray "\" from doc/Makefile.am
  - Applied libtool fix (provided by Alex Oliva) so that it build
   with cross-compilers (which are used by 64 bit systems)
  - Updated sources to the 2.2.5 community release
  - Changed the included libtool to the 1.5-3 one so that
    it properly link the libraries with the newly generated ones
    and not with the ones installed on the build system (or give
    an error if an old version is not installed (# 91110)
  - Added new files for executable DataManagerII and icons LinuxODBC.xpm
    and odbc.xpm


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - enable GUI now that we have KDE compiled with the standard
    compiler
  - move the applnk entries to the KDE package


author: Murray Todd Williams <murray@codingapes.com>
changelog:
  - added a unixODBC-devel RPM to the group, added KDE links and icons to system
  - all of which came from recommendations from Fredrick Meunier
  - <Fredrick.Meunier@computershare.com.au>


author: Marek Grac <mgrac@redhat.com> 1.1.5-9
changelog:
  - Resolves: rhbz#672475 - LV appears as not mounted
  - Resolves: rhbz#672948 - Unable to persist mount point


author: Marek Grac <mgrac@redhat.com> 1.1.5-5
changelog:
  - Resolves: rhbz#567464 - unable to delete a snapshot
  - Resolves: rhbz#548057 - scl should not change order in /etc/fstab
  - Resolves: rhbz#571995 - ext4 resizing is broken
  - Resolves: rhbz#586553 - extending LV creates duplicate entry
  - Resolves: rhbz#578827 - status window is not translated at startup
  - Resolves: rhbz#569498 - problem with snapshot on LV


author: Marek Grac <mgrac@redhat.com> 1.1.5-3
changelog:
  - Resolves: rhbz#455945 - Resizing LV results in the fstab enty being altered
  - Resolves: rhbz#475434 - Removing swap entries from fstav
  - Resolves: rhbz#522200 - System config LVM crashes at start


author: Marek Grac <mgrac@redhat.com> 1.1.5-2
changelog:
  - Resolves: rhbz#525116 - s-c-lvm is extremely slow
  - Resolves: rhbz#516609 - Mirrored LV with corelog is not shown properly
  - Resolves: rhbz#515322 - LVM volume cannot be created in Japanese env.
  - Resolves: rhbz#444525 - Support for ext4/xfs
  - Resolves: rhbz#243646 - Unable to modify logical partition in or_IN
  - Resolves: rhbz#217752 - Default units shoudl be meaningful


author: Ryan McCabe <rmccabe@redhat.com> 1.1.2-1.0
changelog:
  - Update the spec, configure.in, and Makefile.am files
  - Some other minor build tweaks
  - Bump the version number


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.21-1.0
changelog:
  - Fixed 216569 (some messages not localized)
  - Fixed 218126 (Can't resize ext3 fs online)
  - fixes bz216569, bz218126


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.14-1.0
changelog:
  - Fixes for bz180281, 159457, 180269. Mirroring support available with
    constants in lvmui_constants file by setting MIRRORING_UI_SUPPORT to True


author: Jim Parsons <jparsons@redhat.com> 0.9.9-1.0
changelog:
  - Fixes for bz137111, 138887, 138006,138097. Also removed fstab checkbox
    and added it as a feature at 138831 for next release.


author: Jim Parsons <jparsons@redhat.com> 0.9.7-1.0
changelog:
  - Improved handling of garbage in the size string -- try catch in place
    now that traps for ValueError 
  - Improved handling of sizes/units for new LV creation
  - Now 'Unused' sections in Logical View of VGs, are unselectable. Also,
    if there are no LVs associated with a VG, the Logical view buttonpanel 
    button for "Remove selected extents" is set to not be sensitive, as 
    there is nothing to remove from this case.
  - Revamped PV removal code, so that proper checking is done before moving
    extents.
  - Added new method that checks if dm-mirror mod is loaded in kernel. If not,
    an appropriate error message is generated.
  - Fixed tree selection mechanism by preventing multiple VG selection.
  - Handle delete-event on VG creation dialog, so it is hidden.
  - Fixed bz137099, 137071, 137869, 137434, 138085


author: Jim Parsons <jparsons@redhat.com> 0.9.4-1.0
changelog:
  - Fixes for bz137190 empty vg name field validation, 
  - bz137048 removes resizable checkbox for vgcreate, 
  - bz137208 unique vg name checking fixed, 
  - bz137107 remove autobackup checkbox, 
  - bz137231 warn on extend vg when init'ing a new entity.


author: Jiri Popelka <jpopelka@redhat.com> 1.3.99.20-1
changelog:
  - fix path to network.xpm in QethHardwareDruid.glade (rhbz#523493)
  - do not remove GATEWAYDEV from /etc/sysconfig/network (rhbz#602688)
  - establishing a QETH Connection chapter added to help (rhbz#522618)
  - don't remove route-ethX on save (rhbz#501530)
  - device Alias Number was showing 0 (rhbz#701322)
  - disable the Bind to MAC address option on bond slave devices (rhbz#504824)
  - migrate from kudzu to hal (rhbz#538749)
  - Resolves: rhbz#501530, rhbz#504824, rhbz#522618, rhbz#523493,
  - Resolves: rhbz#538749, rhbz#602688, rhbz#701322


author: Harald Hoyer <harald@redhat.com> 1.3.99.13
changelog:
  - add BONDING options to command line output and parsing (rhbz#452776)
  - add MACADDR to QETH dialogs and internal structures (rhbz#484289)
  - Resolves: rhbz#452776, rhbz#484289


author: Jiri Moskovcak <jmoskovc@redhat.com> 1.3.99.11-2
changelog:
  - Fixed essid quoting 
  - Minor fixes to wireless wizard
  - Added option to set channel to Auto
  - Fixed crash when hosts file contains wrong entries
  - Fixed missing icon warning
  - Resolves: rhbz#444320


author: Harald Hoyer <harald@redhat.com> - 1.3.99.11-1
changelog:
  - added OPTIONS for qeth interfaces and bring them online 
    (rhbz#441514, rhbz#440970)
  - do not change the hostname, if already set in the profile, 
    save the hostname to the profile (rhbz#201657)
  - fixed typo in glade file (rhbz#440662)
  - do not traceback on non-int alias (rhbz#235405)
  - require xorg-x11-fonts-Type1 (which is nonsense) (rhbz#241732)
  - removed all ctc traces (rhbz#218771)
  - better static route handling (rhbz#217534)
  - fixed GUI adds trailing spaces to "options" lines in /etc/modprobe.conf
    (Jiri Moskovcak <jmoskovc@redhat.com>) (rhbz#146291)
  - added new option for setting wireless securitymode 
    when adding/deleting wireless devices 
    (Jiri Moskovcak <jmoskovc@redhat.com>) (rhbz#146291)
  - added DNS for text interface (Jiri Moskovcak <jmoskovc@redhat.com>) 
    (rhbz#306601, rhbz#434990)
  - fixed hosts parsing (Jiri Moskovcak <jmoskovc@redhat.com>) (rhbz#442460)
  - Resolves: rhbz#146291 rhbz#201657 rhbz#217534 rhbz#218771 rhbz#241732
  - Resolves: rhbz#291461 rhbz#433162 rhbz#440662 rhbz#440970 rhbz#441514 
  - Resolves: rhbz#444320, rhbz#306601, rhbz#434990, rhbz#442460


author: Harald Hoyer <harald@redhat.com> - 1.3.99.2-1
changelog:
  - added support for s390 qeth devices (rhbz#184734)
  - removed CTC and IUCV support (rhbz#219180)
  - preserve or add ::1 to /etc/hosts (rhbz#213709)
  - do not touch ifcfg-*-range config files (rhbz#221292)
  - default to static if BOOTPROTO unset and IP set (rhbz#227673)
  - Resolves: rhbz#184734, rhbz#219180, rhbz#213709, rhbz#221292, rhbz#227673


author: Harald Hoyer <harald@redhat.com> - 1.3.95
changelog:
  - translation update (bug #208886)
  - use rhpl.iwlib for wireless functions (bug #197954)
  - added perl-XML-Parser build requirement


author: Harald Hoyer <harald@redhat.com> - 1.3.90
changelog:
  - fixed:
  - [135014] MTU and MRU should be confiurable for ADSL
  - [141055] system-config-network needs to be able to set MTU
  - [149780] no GATEWAY, IPADDR and NETMASK, if BOOTPROTO=dhcp 
  - [150362] [Errno 2] No such file or directory: '/etc/hosts'
  - [157172] Wrong DNS for provider "ZEDAT_Berlin"
  - [160417] Bad: cannot make any changes to network settings
  - [169819] Trailing space in host name causes crash
  - [175078] String (country name) change request
  - [176145] Please enable Serbian translation in system-config-network
  - [177198] deprecation warning in system-config-network
  - [187563] localized option passed to ifcfg-wlan0 files
  - [188321] Creating an alias for a network interface breaks device 
             setup after reboots
  - [190242] Firefox instance running as root when used to read docs 
             for system-config-*
  - [197401] Don't write HWADDR for alias interfaces


author: Harald Hoyer <harald@redhat.com> - 1.3.27
changelog:
  - use new pam stack replacement
  - added OnParent for Alias Devices
  - added SPI and better key generation for ipsec
  - corrected column handling in main window
  - GUI liftup
  - added AVM Fritz!PCI v2.0 ISDN card to ISDN Hardwarelist (bug 134605)
  - remove /etc/sysconfig/isdncard, if no ISDN is configured


author: Harald Hoyer <harald@redhat.com> - 1.3.17
changelog:
  - better "make clean"
  - removed references to Red Hat Linux
  - added testsuite for data layer
  - added some module-info entries
  - added command line parsing to network-control
  - added IPsec to network-cmd
  - switched logging to syslog
  - do not touch bonding slaves
  - better alias handling
  - better handling of chroot 
  - read *.ko modules also
  - handle modules parameter without "="
  - create correct SPI_ identifier for manual IPsec keying
  - better hostname handling
  - better profile handling
  - fix kernel version parsing
  - unknown-flag.xpm for unknown country flags
  - fixed TokenRing glade file (bad hash at beginning of file)
  - fix the length of IPSec shared keys
  - prevent modified status after profile switching
  - save dialog, for ipsec deactivation
  - PEERDNS defaults to yes
  - routing for wireless config dialog
  - only display CIPE for kernel < 2.6


author: Harald Hoyer <harald@redhat.com> - 1.3.16
changelog:
  - be more relaxed, when parsing the kernel version (115917)
  - fixed removing of Hostname (115795)
  - fixed "DevEthernet instance has no attribute 'IPv6Init'" (116375)
  - removed save dialog, when switching profiles (107399)
  - added generic Initstrings (115768)
  - added secure.png logo
  - added "-c" parameter for activate/deactivate
  - changed hotkeys to avoid double entries
  - use new pixmap loading code (only take local paths, if debugging is active)
  - moved updateNetworkScripts() to NC_functions.py
  - fallback on /etc/sysconfig/network-scripts
  - removed /usr/lib/rhs/python from sys.path
  - added -? as a command line option
  - corrected --root= option for gui
  - activate/deactivate buttons always sensitive
  - check for ipsec-tools and dynamically display ipsec tab
  - no second dialog while activating in system-control-network
  - change hosts file on hostname change
  - PEERDNS is true, if not configured


author: Harald Hoyer <harald@redhat.de> 1.3.13
changelog:
  - fixed T-Online dialog #110911
  - default flow control to CTSRTS #110347
  - only clear login/pw on provider select, if provider has its own number
  - fixed cancel of dialup process #103421
  - default to "/" for chrooted configuration
  - default to "default" profile if none active
  - fixed "activate button not active" #110193
  - scn-tui requires newt #104213
  - fixed #107816, by recognizing /var/run/ppp-ppp<NICKNAME>.pid
  - fixed a bug in ISDN activate #100677


author: Harald Hoyer <harald@redhat.de> 1.3.12
changelog:
  - renamed redhat-config-network -> system-config-network
  - added pciutils requirement
  - added utf-8 encoding comments
  - corrected some translation strings
  - added redhat-config-network provides


author: Harald Hoyer <harald@redhat.de> 1.3.10
changelog:
  - removed restriction on t-online password entry #105970
  - failsafe changing the error image #108094
  - corrected indention #108151


author: Harald Hoyer <harald@redhat.de> 1.3.9
changelog:
  - fixed 107501, 107387, 106751, 104213
  - fallback to no logfile, if opening the logfile fails
  - test, if /etc/{hosts,resolv.conf} exists
  - removed ipsec tab


author: Harald Hoyer <harald@redhat.de> 1.3.3
changelog:
  - fixed #85365
  - fixed glade file loading
  - more ipsec stuff
  - neat can use a "chrooted" environment now (-r)
  - .rpmsave will not be loaded
  - no interrupt/io settings for PNP cards
  - HIGIfied labels
  - double click for hardware and ipsec


author: Harald Hoyer <harald@redhat.de> 1.2.12-1
changelog:
  - wlan0 handling
  - splash screen bug fixed
  - improvements in HW list handling
  - isdncard handling #91607


author: Harald Hoyer <harald@redhat.de> 1.2.3-3
changelog:
  - Bugfix release for 9
  - fixed #85011, #85703, #85653, #84956, #83640, #68169, #86476, #78043, #77763


author: Trond Eivind Glomsrød <teg@redhat.com> 1.1.17-1
changelog:
  - Make it use the gnome help system, add yelp as a dependency (#71857)
  - Traceback fix: # 72581
  - translation updates


author: Trond Eivind Glomsrød <teg@redhat.com> 1.1.13-1
changelog:
  - Fixes to the traceback dialog (fix "save to floppy" (we don't do that),
    add i18n.)
  - Fix traceback with malformed /etc/hosts (#69320)
  - Fix dependencies (#69990)
  - Some minor userhelper fixes


author: Than Ngo <than@redhat.com> 1.1.3-1
changelog:
  - get_pixbuf: if no icon was not found, looks the icons
    in standard icon directory
  - bug fixes in wireless


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Turn off wireless. It doesn't work with all modes, all cards
   and you can't edit IP settings after the initial attempt


author: Harald Hoyer <harald@redhat.com> 0.9.6-1
changelog:
  - seperated gui from data layer
  - make .pyc ghost files
  - fixed profile/alias problem
  - modem probing only once


author: Than Ngo <than@redhat.com> 0.9.3-1
changelog:
  - fix internet-druid fails (bug #54192)
  - fix dial on demand problem from some ISDN Provider in German
  - don't trace back if length of Login name is 2 (bug #54322)


author: Than Ngo <than@redhat.com> 0.8.2-1
changelog:
  - fix backtrace bug in CIPE
  - fix traceback bug if self.device.Dialup is None
  - if hardware is deleted, remove all devices used this hardware
  - de.po: fix bad translation


author: Phil Knirsch <phil@redhat.de> 0.8.0-2
changelog:
  - Fixed wrong option handling in /etc/modules.conf (#52853, #52923)
  - Fixed empty search entry in /etc/resolv.conf (#52926)
  - Fixed empty domain entry in /etc/resolv.conf (#52924)
  - Fixed ethernet hardware probing traceback (#52921)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.7.4-1
changelog:
  - More bugfixes, among them #51929, #51991, #51721, #51722,
    partial #52044, #51720. 
  - Updated translations, include more languages


author: Phil Knirsch <phil@redhat.de> 0.7-1
changelog:
  - Added a lot of documentation
  - Final changes to the Modem druid dialog and code to look just like the
    hardware add dialog for modems.


author: Phil Knirsch <phil@redhat.de> 0.6.8-3
changelog:
  - Added the modem detection for the ModemDruid.
  - Added kudzu as requirement as it is needed for modem detection.
  - For compatibility still check for symlinks, too. Otherwise older setups will
    break.


author: Phil Knirsch <phil@redhat.de> 0.6.7-2
changelog:
  - Fixed various important bugzilla bugs
  - Added and implemented the add Hardware dialog.
  - Added a working Apply button.
  - Switched to using hardlinks instead of symlinks for config files.


author: Than Ngo <than@redhat.com>
changelog:
  - fix pap/chap Login name for T-online
  - fix InitStrings
  - use gettext function in NC_functions
  - fix loading DEFROUTE/PERSIST/DEMAND/IDLETIMEOUT for Modem dialup
  - don't backtrace if 'SetVolume' and 'Dial Command' are not defined


author: Phil Knirsch <phil@redhat.de> 0.6.1-2
changelog:
  - Fixed buggous removal of ifcfg-lo (#50478)
  - Fixed problems with modem volume in hardware dialog
  - Fixed missing /dev/modem for modem setup (#50673)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Don't run autogen.sh
  - Mark files in /etc as configuration files
  - Multiple fixes to automake files
  - Add Norwegian translation to desktop files
  - install into the configuration tool desktop directory


author: Than Ngo <than@redhat.com> 0.3.1-1
changelog:
  - obsolete isdn-config internet-config
  - requires consolehelper, alchemist
  - add icon and desktop file
  - use bzip2


author: Nils Philippsen <nphilipp@redhat.com> 1.3.18
changelog:
  - don't complain when trying to edit a share (#179687)
  - handle wildcards in warning messages for duplicates


author: Nils Philippsen <nphilipp@redhat.com> 1.3.16
changelog:
  - avoid exporting a share more than once to a specific client
  - allow exporting a share with different settings for different clients
    (#178830)


author: Nils Philippsen <nphilipp@redhat.com> 1.3.15
changelog:
  - don't apply server settings (non-)changes on Cancel
  - make server settings dialog actually show all text entries


author: Nils Philippsen <nphilipp@redhat.com> 1.3.13
changelog:
  - include missing files (spotted by Bernardo Innocenti), remove unneeded test
    and sample files
  - don't remove byte-compiled files anymore


author: Nils Philippsen <nphilipp@redhat.com> 1.3.12
changelog:
  - allow user to set networking ports to be used (#151166)
  - separate code concerning the NFS server, its settings and NFS exports
  - some code cleanup


author: Nils Philippsen <nphilipp@redhat.com> 1.3.11
changelog:
  - display permissions correctly in list (#162437)
  - use symbolic names when dealing with list columns
  - edit entry when double-clicking on it


author: Nils Philippsen <nphilipp@redhat.com> 1.3.6-1
changelog:
  - fix deprecation warnings (#153048) with patch by Colin Charles
  - update the GTK+ theme icon cache on (un)install (Christopher Aillon)


author: Nils Philippsen <nphilipp@redhat.com> 1.2.7-1
changelog:
  - close properties dialog when clicking OK button
  - handle missing /etc/exports gracefully
  - byte-compile python files


author: Brent Fox <bfox@redhat.com> 1.2.0-1
changelog:
  - renamed from redhat-config-nfs to system-config-nfs
  - add Obsoletes for redhat-config-nfs
  - updated for Python2.3


author: Brent Fox <bfox@redhat.com> 0.9.9-2
changelog:
  - Fix bug when clicking Apply with empty ListStore - bug 69682
  - Fix bug 70626 so that the dialog can stretch for long strings
  - Fix bug 71107 by requiring nfs-utils
  - Convert remaining non-UTF8 po files to UTF8


author: Brent Fox <bfox@redhat.com> 0.9.4-3
changelog:
  - Fix bug 68945.  Desensitize property and delete widgets as needed
  - Fix bug 67958.  Default to 'sync' transfers


author: Brent Fox <bfox@redhat.com>
changelog:
  - Big port to Python2.2/Gtk2
  - Removed glade dep and recoded the UI by hand. (libglade2 wasn't working out for me)
  - Ready for rebuilding and testing now


author: Brent Fox <bfox@redhat.com> 1.1.0-1
changelog:
  - rename from redhat-config-rootpassword to system-config-password
  - add Obsoletes for redhat-config-rootpassword
  - make passwordDialog.py able to have a user passed into it other than root
  - rename rootpassword.py to passwordDialog.py


author: Nils Philippsen <nils@redhat.com> - 1.2.41-4
changelog:
  - dump error message in case of pdbedit errors that don't stem from the user
    not being root (part of a future fix for #460431)
  - don't remove widgets in the add/edit user dialog when editing users (#460291)
  - avoid malformed username map entries (#460271)
  - gracefully handle unknown configuration options (#460270)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.41-2
changelog:
  - rebase to 1.2.41:
    - don't access smbpasswd directly but use pdbedit to allow for tdb/ldap
      backends (#418561)
    - make samba user changes be reflected in UI (#429742)
  - fix manipulating "valid users" parameter (#364011)


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - mention that we are upstream
  - clean buildroot before installing
  - fix licensing blurb in PO files


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.38
changelog:
  - get list of configuration parameters and defaults from testparm, fix
    duplicate dict keys (#219308)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.29-1
changelog:
  - fix deprecation warnings (#153051) with patch by Colin Charles
  - update the GTK+ theme icon cache on (un)install (Christopher Aillon)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.26-1
changelog:
  - ignore case of share name when deleting share (#144504)
  - when double clicking share, open properties dialog


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - assume default is "security == user" to avoid traceback on users dialog
    (#144511)
  - update main window when changing share path (#144168)
  - include Ukrainian translation in desktop file (#143659)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.25-1
changelog:
  - use correct option menu for encrypt password
  - use lower case for security value
  - mask default values with a ";" instead of removing them altogether


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.24-1
changelog:
  - revamp BasicPreferencesWin.readFile() (#143951)
  - remove stray debugging statement
  - pick up new strings to be translated


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.23-1
changelog:
  - totally revamp how parsed smb.conf is handled internally (class
    SambaSection), among other things to not screw up smb.conf when editing share
    names (#143291)
  - don't assume all users selected == "guest ok"
  - make About/Copyright easily extensible without screwing up translations
  - admit complicity
  - remove tab indentation
  - some more code consolidation
  - pick up updated translations


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.20-1
changelog:
  - use template file if smb.conf is missing (#131323)
  - when saving smb.conf, write to new file and rename (#131323)
  - set safe umask (#131323)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.14-1
changelog:
  - make share name configurable (#110804, use patch from Philip Van Hoof, fix
    it up a bit)
  - do some more code consolidation


author: Brent Fox <bfox@redhat.com> 1.2.2-1
changelog:
  - fix glade file path problem
  - wrap smbpasswd in quotes (bug #112528)
  - don't call lower() on server string (bug #111758)


author: Brent Fox <bfox@redhat.com> 1.2.0-1
changelog:
  - rename from redhat-config-samba to system-config-samba
  - add Obsoletes for redhat-config-samba
  - update for Python2.3


author: Brent Fox <bfox@redhat.com> 1.0.13-1
changelog:
  - apply patch from Nalin to handle Samba3 changes
  - fix selection problem with security option menu for ADS


author: Brent Fox <bfox@redhat.com> 1.0.12-1
changelog:
  - sambaDefaults.py: encrypt password default is "Yes" (bug #103752)
  - basicPreferencesWin.py: Make encrypt passwd menu default to "Yes" (bug #103752)


author: Brent Fox <bfox@redhat.com> 1.0.4-1
changelog:
  - handle problems with valid/invalid users (bug #84271)
  - handle 'public' as a synonym of 'guest ok' (bug #84272)


author: Brent Fox <bfox@redhat.com> 1.0.1-6
changelog:
  - add 'authentication server' (bug #82049)
  - remove 'update encrypted'
  - force encrypted passwords with domain security (bug #82050)


author: Tammy Fox <tfox@redhat.com> 1.0.1-1
changelog:
  - make popup windows transient (bug #81402)
  - require a workgroup name
  - strip strings before comparing to empty


author: Tammy Fox <tfox@redhat.com>
changelog:
  - use stock icons for menu items
  - add about box
  - center popup windows
  - set modal to true for popup windows


author: Thomas Woerner <twoerner@redhat.com> 1.6.29.1-6
changelog:
  - fixed focus of add port dialog (rhbz#352401)
  - honour protocol of predefined services (rhbz#474100)
  - stop ip6tables properly (rhbz#526477)
    Thanks to Oliver Fourdan for the patch


author: Thomas Woerner <twoerner@redhat.com> 1.6.29.1-3
changelog:
  - fixed port range validation
    Resolves: rhbz#503588
  - fixed requirement for setenforce: libselinux-utils
    Resolves: rhbz#532947
  - added missing path for setenforce calls in lokkit
    Resolves: rhbz#532948


author: Thomas Woerner <twoerner@redhat.com> 1.6.29.1-2
changelog:
  - fixed gu_IN translation
    Resolves: rhbz#222629
  - fixed ipv6 rules to be more secure
    Resolves: rhbz#232931
  - fixed missing complain on configuration error
    Resolves: rhbz#243743
  - fixed dialog placement failure
    Resolves: rhbz#243744
  - fixed expanding list to be expanding
    Resolves: rhbz#243745
  - fixed port check to properly check the port and range
    Resolves: rhbz#247608


author: Chris Lumens <clumens@redhat.com> 1.6.29-1
changelog:
  - Update translations (#216563).
  - Remove unnecessary SELinux boolean panel.
  - GUI package should require same version of TUI package.
  - Fix IPv6 firewall to allow outbound connections and block incoming
    connections we don't need (tmraz, #217514).
  - Other ports expander should grow as the window grows (#217645).


author: Chris Lumens <clumens@redhat.com> 1.6.28-1
changelog:
  - Write SELinux config file before setting enforcing mode (#209372).
  - Add apply button to GUI (#177836).


author: Chris Lumens <clumens@redhat.com> 1.6.21-1
changelog:
  - Correctly mark messages for translation (#195013).
  - Remove /etc/sysconfig/ip6tables when firewall is disabled (#195786).


author: Chris Lumens <clumens@redhat.com> 1.6.20-1
changelog:
  - Be more careful when determining if something is a range or service with
    a dash in it (#192933).


author: Chris Lumens <clumens@redhat.com> 1.6.17-1
changelog:
  - Be smarter about if strings are valid ports (#183964).
  - Fix typo in firstboot (#186110).
  - Disable SELinux page if there's no policy installed (#186554).


author: Chris Lumens <clumens@redhat.com> 1.6.16-1
changelog:
  - Add requirement for scriptlets (#182876, #182877).
  - Add glade UI strings to translations (#182181).
  - Reorder service checkboxes to make the screen fit for Italian (#182447).


author: Chris Lumens <clumens@redhat.com> 1.6.15-1
changelog:
  - Fix firstboot warnings.
  - Make other services box look better.
  - Force reboot if SELinux is changed from enabled to disabled in
    firstboot (#177639).


author: Chris Lumens <clumens@redhat.com> 1.6.13-1
changelog:
  - Sort trusted services by service name (#178467).
  - Use a combo box for the other services list instead of just a text entry
    (#178108).


author: Chris Lumens <clumens@redhat.com> 1.6.6-1
changelog:
  - Add explanatory text to firewall and SELinux firstboot modules (#171022).
  - Fix a grammar error in lokkit help text (#152273).
  - Mark name in .desktop file for translation (#171819).
  - Remove support for modifying tunables since policy source will be
    disappearing in the future (#160896).


author: Chris Lumens <clumens@redhat.com> 1.6.5-1
changelog:
  - Remove the SELinux policy type combo box if there's only one policy
    installed.
  - Use a new pam configuration (#170644).
  - Don't pop up relabel warning during firstboot if the user did something
    like disabled->enabled->disabled before clicking next (#170549, #170550).


author: Chris Lumens <clumens@redhat.com> 1.6.4-1
changelog:
  - Fix checking for the -f flag in lokkit (markmc, #166568).
  - Sync up order of enable/disable options between UI and what gets written
    to the file (#166390).


author: Chris Lumens <clumens@redhat.com> 1.6.1-1
changelog:
  - Fix a typo in SELinux booleans (#164889).
  - Remove trusted devices section from firewall page.
  - Simplify choices on SELinux page (#164701).
  - Split firewall and SELinux into separate firstboot pages.
  - Require reboot after firstboot is done if SELinux options were changed.


author: Chris Lumens <clumens@redhat.com> 1.5.9-1
changelog:
  - Handle ports that are not listed in /etc/services (#157620).
  - Add an option to allow Samba browsing - enables several ports, so use
    with care (#133478).
  - Mark updated menu option and comment for translation (#156800).
  - Rebuilt .pot file.


author: Chris Lumens <clumens@redhat.com> 1.5.4-1
changelog:
  - Add HTTPS as a separate option instead of implying it with HTTP.
    (#145628).
  - Have the menu option and comment mention firewalling (#124266).
  - When reading in the config, use service names instead of port numbers in
    the other ports field (#128541).
  - Rebuild .pot file for string changes.


author: Chris Lumens <clumens@redhat.com> 1.5.3-1
changelog:
  - Rebuild .pot file.
  - Return translatable strings for SELinux page (Ronny Buchmann, #152059).
  - Fix GTK deprecation warnings.


author: Dan Walsh <dwalsh@redhat.com> 1.4.1-3
changelog:
  - Fix several problems including Tunables being reported incorrectly.
  - Allow tool to reload policy if tunables change
  - Allow tool to change enforcing mode


author: Jeremy Katz <katzj@redhat.com> 1.3.6-1
changelog:
  - fix segfault in config reading if config files don't exist
  - don't flush iptables chains if run with --nostart


author: Bill Nottingham <notting@redhat.com > 1.3.5-1
changelog:
  - read in old config in the TUI (#25510)
  - have https tag along with http (#61958)
  - fix segfault (#88533)


author: Brent Fox <bfox@aspen.chinfox.net> 1.3.0-1
changelog:
  - rename to system-config-securitylevel
  - obsoletes redhat-config-securitylevel
  - convert to Python2.3


author: Bill Nottingham <notting@redhat.com> 1.2.0-1
changelog:
  - add patch for stateful firewalling (#87585, <dax@gurulabs.com>)
  - tweak tools appropriately (katzj@redhat.com), obsolete lokkit/gnome-lokkit


author: Nils Philippsen <nils@redhat.com> - 0.9.4-5
changelog:
  - correctly set current service when changing notebook pages, correct typos
    (#445185)
  - fix adding unknown and deleting services (#500424)


author: Nils Philippsen <nils@redhat.com>
changelog:
  - use correct tool name in documentation (#370461)
  - avoid tracebacks when restarting xinet services (#445185)


author: Harald Hoyer <harald@redhat.com> - 0.9.4
changelog:
  - fixed service start/stop (#218429)
  - translation update (#216558)
  - Resolves: rhbz#216558, rhbz#218429


author: Nils Philippsen <nphilipp@redhat.com> - 0.9.1
changelog:
  - don't disable Start/Stop/Restart upon reverting changes (#202722)
  - add dist tag
  - install po files (again)
  - require gettext for building
  - fix tagging for make archive
  - fix circular make dependency
  - remove duplicate message definitions


author: Florian Festi <ffesti@redhat.com>
changelog:
  - rewrote large parts of servicemethods (OO design, better handling of old/new
    settings, read headers of init scripts completely)
  - first implementation of widgets to control services (intended for tools
    configuring single services like nfs, samba, bind, ...), still missing: i18n,
    dependencies on other services (like portmap)


author: Nils Philippsen <nphilipp@redhat.com> - 0.8.26
changelog:
  - revamp getting output from external commands (#162884)
  - package /usr/bin/serviceconf symlink (#165099)


author: Nils Philippsen <nphilipp@redhat.com> 0.8.22-1
changelog:
  - fix deprecation warnings (#153052) with patch by Colin Charles
  - update the GTK+ theme icon cache on (un)install (Christopher Aillon)


author: Nils Philippsen <nphilipp@redhat.com> 0.8.21-1
changelog:
  - connect toggled signals of service/runlevel checkboxes to enable saving again
    (#151982)
  - consolidate on_optRL*_toggled
  - connect delete_event of mainWindow to ask whether things should be saved
    before quitting
  - tab -> space indentation to avoid ambiguity
  - change some typos


author: Nils Philippsen <nphilipp@redhat.com> 0.8.20-1
changelog:
  - don't read from /dev/null when restarting xinetd/services to prevent hangs
  - build toolbar in glade to avoid DeprecationWarnings (#134978)
  - dynamic, translated column titles for runlevel columns


author: Brent Fox <bfox@redhat.com> 0.8.7-1
changelog:
  - remove dependency on gnome-python2 and gnome-python2-canvas
  - try to load glade file in the cwd, if not, pull from /usr/share/
  - apply patch from bug #117277


author: Daniel J Walsh <dwalsh@redhat.com> 0.8.3-6
changelog:
  - Fix DISPLAY error handling
  - Stretch Screen size
  - Update status box after Start/Stop/Restart
  - Fix Icon error


author: Dan Walsh <dwalsh@redhat.com> 0.8.1-5
changelog:
  - Updated to use intltool and new build environment.
  - Added with pam changes for timestamp
  - New internationalization stuff


author: Bill Nottingham <notting@redhat.com>
changelog:
  - translation typos (#51774, #51776)
  - add system-config-services link
  - if we're using find_lang, don't specify the .mo files explicitly


author: Tim Powers <timp@redhat.com>
changelog:
  - gnomified
  - work around parsing languified chkconfig output so that we can get accurate information displayed


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added help doc
  - moved man page into man directory
  - added Makefile for man page
  - added man page to spec file


author: Martin Stransky <stransky@redhat.com> 2.0.0-2
changelog:
  - added pycairo to Requires
  - compacted card detection
  - fixed info and error dialog boxes
  - fixed configuration loading
  - fixed playback (added script)


author: Martin Stransky <stransky@redhat.com> 1.2.16-3
changelog:
  - fix for #183524 - scsound.log file not created after 
                      failing to configure sound card


author: Martin Stransky <stransky@redhat.com> 1.2.14
changelog:
  - fix for #170073 - Cannot configure snd-dummy
  - fix for #171545 - Please do not hard code file name into
  - fix for #156802 - Menu entry not localized


author: Martin Stransky <stransky@redhat.com> 1.2.12-4
changelog:
  - moved /usr/bin/alsaunmute and /usr/bin/alsacard to /bin
  - removed default_card (#134317)
  - added sorting for cards
  - added HW/SW config switch
  - added log file (/root/scsound.log)
  - added dialog for default audio device
  - set non-blocking mode for aplay


author: - Bastien Nocera <hadess@hadess.net> 1.2.11-1
changelog:
  - unmute the card we're about to play sound for when using ALSA
  - fix setting the volumes with amixer
  - Umute PCM-2 and "DRC Range" as well (#127863) (#146357)
  - Remove unneeded alsa-lib dep (#134319)
  - Remove use of deprecated gtk.FALSE and gtk.TRUE (#153053)
  - Scan the ISA and MacIO buses for soundcards (#146888)
  - Write an asound.conf file even when there's only one soundcard (#134339)
  - Don't crash when we can't find the default soundcard, or the description
    doesn't contain a space (#142801)
  - Use the plughw device to playback the test sample (#134335)


author: Bastien Nocera <bnocera@redhat.com>
changelog:
  - remove useless debug
  - remove use of deprecated Python functions,
  - list USB audio devices
  - don't crash if we can't get the whole maker/model
  - use aplay to play sounds on 2.6 kernels


author: Brent Fox <bfox@redhat.com> 1.1.0-1
changelog:
  - rename from redhat-config-soundcard into system-config-soundcard
  - add Obsoletes for redhat-config-soundcard
  - make changes for Python2.3


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - clarify comments, add new variables in /etc/sysconfig/system-config-users
  - use new method to choose GID when creating groups as well
  - actually set new user's GID
  - remove debugging statements


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.45
changelog:
  - revamp uid/gid number selection to honor preferences and avoid primary
    group/created group discrepancies (#198152)
  - use disttag if available


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.40
changelog:
  - initialize shadow variables only if shadow passwords are used
    (#168524, #168529, patch by Josef Whiter)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.30-1
changelog:
  - use os.lstat() to test ownership of files to be deleted
  - update the GTK+ theme icon cache on (un)install


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.27-1
changelog:
  - some sanity testing to avoid deleting system directories when deleting a user
    (#138093)
  - eventually delete mail spool (#102637) and temporary files (#126756)


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - set password and confirm password entries (in)sensitive based on whether
    account is locked or not (#131180)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.24-1
changelog:
  - use user/group names for indexing, avoid unnecessary user/group lookups
    (#135223, original patch by Miloslav Trmac)
  - remove some debugging statements
  - updated translations


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.23-1
changelog:
  - try to fix 32bit uids/gids (#134803)
  - fix gtk.main*() related DeprecationWarnings
  - byte-compile python files in "make install"
  - updated translations


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.20-1
changelog:
  - allow UTF-8 in user's full name (#133137)
  - require new libuser version so that fix for #80624 doesn't throw exception
    (#133479)
  - admit complicity


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.18-1
changelog:
  - use F1 instead of Ctrl+H as accelerator for Help/Contents (#132163)
  - use "mkdir -p" to fix make install glitch
  - use absolute paths in *.glade to fix pygtk/pyglade subtleties


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.15-1
changelog:
  - add manpage (Chris Spencer, #115316)
  - add Slovenian translation to desktop file (Roman Maurer, #131835)


author: Brent Fox <bfox@redhat.com> 1.2.7-1
changelog:
  - preserve existing group selection in userProperties.py (bug #111199)
  - handle munged config file (bug #108400)


author: Brent Fox <bfox@redhat.com> 1.2.5-1
changelog:
  - rename from redhat-config-users
  - add Obsoletes for redhat-config-users
  - make changes for Python2.3


author: Brent Fox <bfox@redhat.com> 1.1.17-1
changelog:
  - if shadow passwords are not enabled, do not show certain widgets (bug #104536)
  - don't modify password expiration data by accident (bug #88190)


author: Brent Fox <bfox@redhat.com> 1.1.16-1
changelog:
  - clarify error dialog message (bug #101607)
  - allow underscores and dashes in usernames and groupnames (bug #99115)


author: Brent Fox <bfox@redhat.com> 1.1.11-1
changelog:
  - don't create new user with an existing uid (bug #90911)
  - use the messageDialog module in groupWindow.py
  - don't create group with an existing gid (bug #90911)


author: Brent Fox <bfox@redhat.com> 1.1.9-1
changelog:
  - popup a confirmation dialog when deleting groups
  - popup a confirmation dialog when deleting users


author: Brent Fox <bfox@redhat.com> 1.1.7-1
changelog:
  - don't allow colons in username or homedir names (bug #90481)
  - check for zero length in usernames, groupnames, gecos, and homedirs


author: Brent Fox <bfox@redhat.com> 1.1.5-1
changelog:
  - don't allow root account to be locked
  - make default values for SHADOW* on user creation so we can do password aging properly later


author: Brent Fox <bfox@redhat.com> 1.1.3-3
changelog:
  - force ascii input (bug #74058)
  - make sure that groupWindow calls self.ready() after showing dialogs
  - remove sentence hacks in asciiCheck.py (bug #82015)
  - fix typo in about box (bug #82016)
  - do not create homedir if they user doesn't want to
  - only offer to delete homedirs if they actually exist  (bug #78619)
  - if the user is the only member of their group, delete the group automatically (bug #78620)


author: Brent Fox <bfox@redhat.com> 1.1.1-9
changelog:
  - handle window delete-events correctly
  - call ready() after dialog is destroyed (bug #80625)
  - if a deleted user is the only user in his primary group, offer to delete the group too (bug #78620)


author: Dan Walsh <dwalsh@redhat.com> 1.1-16
changelog:
  - Fix traceback bug, caused by unitialized variable
  - Fix traceback bug, caused by primary gid missing from /etc/group


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Attempt to minimize enumerations where possible
  - Always use defined constants for attribute names


author: Brent Fox <bfox@redhat.com>
changelog:
  - mainWindow.glade: Changed GUI per jrb's recommendations
  - mainWindow.py: added interfacing with libuser backend


author: Jonathan Blandford <jrb@redhat.com>
changelog:
  - mainWindow.glade: Cleaned up glade file a bunch.
  - mainWindow.py: modified to deal with updated glade.


author: Frank Ch. Eigler <fche@redhat.com> - 1.3-5
changelog:
  - bz607232 (patch)
  - bz646870 (bundle newer elfutils)
  - bz644350 (patch)
  - bz661424 (patch)
  - bz559599 (patch)


author: Frank Ch. Eigler <fche@redhat.com> - 1.1-2
changelog:
  - rhbz561889 = CVE-2010-0411: __get_argv overflows
  - rhbz512202: update tcp/mib tapsets
  - rhbz560890: stap -L/-l argument order preservation
  - rhbz563114: syscall.* regression w/ sys_pipe32 disappearanced
  - rhbz559643: fix testsuite bugs in labels.exp causing dejagnu hangs
  - rhbz564445: fix sdt.h probes with prelinked libraries
  - rhbz564443: harden unprivileged mode
  - pr11286: fix stap-client --server=FOO
  - rhbz556565: CVE-2009-4273 + CVE-2010-0412: more stap-server fixes
  - pr11296: fix systemtap-testsuite sdt.h tests


author: Frank Ch. Eigler <fche@redhat.com> - 0.6.1-3
changelog:
  - Add zlib-devel to buildreq; missing from crash-devel
  - Process testsuite .stp files for #!stap->#!/usr/bin/stap


author: Frank Ch. Eigler <fche@redhat.com> - 0.6.1-1
changelog:
  - Add crash-devel buildreq to build staplog.so crash(8) module.
  - Many robustness & functionality improvements:


author: Frank Ch. Eigler <fche@redhat.com> - 0.5.14-1
changelog:
  - Many robustness improvements: 1117, 1134, 1305, 1307, 1570, 1806,
    2033, 2116, 2224, 2339, 2341, 2406, 2426, 2438, 2583, 3037,
    3261, 3282, 3331, 3428 3519, 3545, 3625, 3648, 3880, 3888, 3911,
    3952, 3965, 4066, 4071, 4075, 4078, 4081, 4096, 4119, 4122, 4127,
    4146, 4171, 4179, 4183, 4221, 4224, 4254, 4281, 4319, 4323, 4326,
    4329, 4332, 4337, 4415, 4432, 4444, 4445, 4458, 4467, 4470, 4471,
    4518, 4567, 4570, 4579, 4589, 4609, 4664


author: Frank Ch. Eigler <fche@redhat.com> - 0.5.7-1
changelog:
  - PRs 2511 2453 2307 1813 1944 2497 2538 2476 2568 1341 2058 2220 2437
    1326 2014 2599 2427 2438 2465 1930 2149 2610 2293 2634 2506 2433


author: Frank Ch. Eigler <fche@redhat.com> - 0.5-1
changelog:
  - Many fixes and improvements: 1425, 1536, 1505, 1380, 1329, 1828, 1271,
    1339, 1340, 1345, 1837, 1917, 1903, 1336, 1868, 1594, 1564, 1276, 1295


author: Roland McGrath <roland@redhat.com> - 0.4.2-1
changelog:
  - Many fixes and improvements: PRs 1344, 1260, 1330, 1295, 1311, 1368,
    1182, 1131, 1332, 1366, 1456, 1271, 1338, 1482, 1477, 1194.


author: Roland McGrath <roland@redhat.com> - 0.4.1-1
changelog:
  - Many fixes and improvements since 0.2.2; relevant PRs include:
    1122, 1134, 1155, 1172, 1174, 1175, 1180, 1186, 1187, 1191, 1193, 1195,
    1197, 1205, 1206, 1209, 1213, 1244, 1257, 1258, 1260, 1265, 1268, 1270,
    1289, 1292, 1306, 1335, 1257


author: Martin Hunt <hunt@redhat.com>
changelog:
  - Set Version to use version from autoconf.
  - Fix up some of the path names.
  - Add Requires and BuildRequires.


author: Petr Lautrbach <plautrba@redhat.com> 2.86-16
changelog:
  - Fix pathname detection (#507382)
  - Check read value from /proc/pid/stat (#592956)
  - last - Add wide output names with -w (#673533)
  - fix ipv6 support in last command (#690939)


author: Bill Nottingham <notting@redhat.com> - 2.86-15
changelog:
  - Allow 'telinit u' in runlevel 0 and runlevel 6 (#348651)
  - Fix wall man page (#436469, <jnansi@redhat.com>)
  - Fix symbol collision with nss_ldap (#454675, <nalin@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 2.86-11
changelog:
  - fix warning on SELinux policy load failure (#185603)
  - don't package /dev/initctl (#174652, #199939)
  - allow some time for failed console opens to resolve themselves (#181546)
  - add documentation of -f to last(1) (#192804)


author: Bill Nottingham <notting@redhat.com> - 2.86-9
changelog:
  - preserve 'WAITING' across re-exec (#143289, others)
  - actually apply quiet patch
  - don't write garbage to utmp on x86-64 (#176494)


author: Bill Nottingham <notting@redhat.com> - 2.86-1
changelog:
  - update to upstream 2.86
  - adjust patches
  - install initreq.h (#119039)
  - allow halt/reboot to handle being called by login correctly (#104062, <worley@theworld.com>)
  - document pam_console usage for halt (#114970)


author: Bill Nottingham <notting@redhat.com> - 2.85-38
changelog:
  - pidof: use readlink instead of stat to avoid NFS hangs (#138788, <constgq@yahoo.com))
  - pidof: fix handling of scripts (#85796)
  - pidof: add -c option for only matching processes with the same root (<twoerner@redhat.com>)


author: Bill Nottingham <notting@redhat.com> - 2.85-37
changelog:
  - add patch for SELinux user configs (<dwalsh@redhat.com>)
  - disable readlink patch while it's being fixed


author: Bill Nottingham <notting@redhat.com> 2.85-22
changelog:
  - move /selinux to filesystem
  - print out warning if we're terminating because of enforcing + no policy
  - handle non-selinux kernels better (#118826)


author: Arjan van de Ven <arjanv@redhat.com>
changelog:
  - fix wait() handling wrt setting SIGCHLD to SIG_IGN in shutdown
  - fix segfault in spawn() function in shutdown


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't strip binaries
  - have wall not write to non-ttys (#65412)
  - update usage for halt/reboot (#57753)
  - allow '-t' argument to last for checking state at certain times (#56863)
  - make 'pidof /foo/bar' not match /baz/bar (#53918)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - show users with no login pid but no logout record as gone (#42550,
    <cwolf@starclass.com>)
  - fix sulogin to *always* work without a tty (#40934)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - document '-n' option to wall, make it root-only (#18672)
  - don't open files in sulogin unless they're really ttys (#21862)


author: Chris Evans <chris@ferret.lmh.ox.ac.uk>
changelog:
  - Fix a securelevel releated security hole. Go on, try and break append
    only files + securelevel now ;-)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - fixed the MD5 check in sulogin (128 hash bits encoded with base64 gives
    22 bytes, not 24...). Fix in -md5.patch


author: Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>
changelog:
  - /etc/initrunlvl gets linked to /tmp/init-root/var/run/initrunlvl which is
    just plain wrong..
  - /usr/bin/utmpdump was missing in the files section, although it was
    explicitly patched into PROGS.
  - added attr's to the files section.
  - various small fixes.


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.17-31
changelog:
  - Improve message with response directions to reflect new option
    for user names with dot character
    Related: #574451


author: David Cantrell <dcantrell@redhat.com> - 8.4.12-1
changelog:
  - Upgraded to tcl-8.4.12
  - Use ksh rather than bash for the configure script (known bug w/ bash-3.1)
  - Generate HTML docs from source
  - Add in the Tk source for HTML doc generation


author: Jens Petersen <petersen@redhat.com> - 8.4.11-1
changelog:
  - update to latest stable release
    - update tcl-8.4-autoconf.patch
  - buildrequire sed and use it instead of perl for editting tclConfig.sh


author: Jens Petersen <petersen@redhat.com> - 8.4.7-2
changelog:
  - improve tcl8.3.5-tclConfig-package-path-90160.patch to look in libdir in
    addition to datadir for packages, so that tclsh can load binary packages
    in lib64 (135310)


author: Jens Petersen <petersen@redhat.com> - 8.4.7-1
changelog:
  - update to 8.4.7
    - replace tcl-8.4.5-no_rpath.patch by tcl-8.4-no_rpath.patch
    - replace tcl-8.4.5-autoconf.patch by tcl-8.4-autoconf.patch
  - no longer obsolete itcl


author: Jens Petersen <petersen@redhat.com> - 8.4.5-6
changelog:
  - apply tcl-8.4.5-autoconf.patch to build with autoconf 2.5x
    (Robert Scheck, #116773)
  - use %{name} more extensively for script portability
  - run "make test" by default when building (can be disabled with
    "--without check")
  - add a backwards compatible symlink /usr/lib/tk8.4 ->
    /usr/share/tk8.4 (Michal Jaegermann, part of #90160)
  - use "mkdir -p" instead of "mkdirhier" (Robert Scheck, #116771)
  - include some doc files


author: Jens Petersen <petersen@redhat.com> - 8.4.5-2
changelog:
  - put private header files under generic and unix subdirs
  - include real generic/tclPort.h not just a symlink to tclUnixPort.h
  - add tclMath.h to /usr/include/tcl-private/generic for building tk
  - remove build remnants from tclConfig.sh


author: Jens Petersen <petersen@redhat.com> - 8.4.5-1
changelog:
  - new package split out from tcltk
  - update to tcl 8.4.5 (#88429)
    - drop tcl-8.3.3-heiierarchy.patch, tcl-8.3.3-dlopen.patch
      and tcl8.3.5-koi8-u.enc-88806.patch
  - include private include headers under /usr/include/tcl-private
  - filtered changelog for tcl
  - buildrequire autoconf213 (#110583) [mvd@mylinux.com.ua]


author: Jens Petersen <petersen@redhat.com> - 8.3.5-90
changelog:
  - split out devel files from tcl and tk into -devel subpackages (#90087)
  - fix tcl package path in tclConfig.sh to point to datadir (#90160)
    [reported by Michal Jaegermann]
  - remove gratuitous whitespace in koi8-u.enc (#88806)
    [reported with fix by Victor Cheburkin]
  - update ucs4 patch to also change regcustom.h, but disable it for now (#89098)


author: Jens Petersen <petersen@redhat.com> - 8.3.5-84
changelog:
  - link all libs with DT_SONAME using tcl.m4 patch (#81297)
  - drop synthetic lib provides
  - remove obsolete patches from srpm
  - update buildrequires
  - use buildroot instead of RPM_BUILD_ROOT
  - install all man pages under mandir, instead of moving some from /usr/man
  - install libtcl and libtk mode 755
  - introduce _genfilelist macro for clean single-sweep find filelist generation
    for each package
  - use perl to remove buildroot prefix from filelists


author: Jens Petersen <petersen@redhat.com> 8.3.5-76
changelog:
  - make it build on x86_64 (details below)
  - don't explicitly update config.{guess,sub} since %configure does it for us
  - added "--without check" rpmbuild option to disable running tests in future
  - build and install tcl and tk with script files under datadir (not libdir)
  - generate filelists from datadir and not from mandir from now on


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update to tcl-8.3.5, tk-8.3.5, tcl-html-8.3.5
  - update url for tcl, tk, tclx, itcl, tcllib
  - build without all makecfg patches for now
    - in particular use upstream versioned library name convention
  - add backward compatible lib symlinks for now
  - add unversioned symlinks for versioned bindir files
  - use make's -C option rather than jumping in and out of source dirs
    during install
  - use INSTALL_ROOT destdir-like make variable instead of makeinstall
    for all subpackages except tix and itcl


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update to tcl-8.3.4, tk-8.3.4 (#75600), tcllib-1.3, itcl-3.2.1,
    tix-8.1.3 (#59098)
  - drop obsolete tcl cruft, tcl refcount, tix perf patches
  - added tcltk html manual
  - drop the crud compat dir symlinks in libdir
  - package now builds without tcl or tk installed (partly #52606)
    - replace all relative paths by absolutes ones, using new tcltktop
    - give absolute paths to tcl and tk when configuring
    - give buildroot bindir path to tcllib make
    - export buildroot libdir in LD_LIBRARY_PATH when installing
  - replace tclvers and tkvers by tcltkvers and use it
  - replace tcl_major and tk_major by tcltk_major and use it
  - don't explicitly provide 64bit libs on ia64 and sparc64


author: Adrian Havill <havill@redhat.com>
changelog:
  * Mon Aug  8 2001 Adrian Havill <havill@redhat.com>
  - re-enable glibc string and math inlines; recent gcc is a-ok.
  - optimize at -O2 instead of -O
  - rename "soname" patches related to makefile/autoconf changes
  - added elf "needed" for tk, tclx, tix, itk


author: Adrian Havill <havill@redhat.com>
changelog:
  - used %makeinstall to brute force fix any remaining unflexible makefile dirs
  - fixed bad ref count release in tcl (bug 49406)
  - revert --enable-threads, linux is (still) not ready (yet) (bug 49251)


author: Adrian Havill <havill@redhat.com>
changelog:
  - refresh all sources to latest stable (TODO: separate expect/expectk)
  - massage out some build stuff to patches (TODO: libtoolize hacked constants)
  - remove patches already rolled into the upstream
  - removed RPATH (bugs 45569, 46085, 46086), added SONAMEs to ELFs
  - changed shared object filenames to something less gross
  - reenable threads which seem to work now
  - made compile-friendly for IA64


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - FHS packaging changes.
  - revert --enable-threads, linux is not ready (yet) (#11789).
  - tcl/tk: update to 8.3.1 (#10779).
  - abstract major tcltk version for soname expansion etc.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to (tcl,tk}-8.2.3, expect-5.31, and itcl-3.1.0, URL's as well.
  - use perl to drill out pre-pended RPM_BUILD_ROOT.
  - configure with --enable-threads (experimental).
  - correct hierarchy spelling (#7082).


author: Otto Hammersmith <otto@redhat.com>
changelog:
  - added patch to remove libieee test in configure.in for tcl and tk.
    Shouldn't be needed anymore for glibc systems, but this isn't the "proper" 
    solution for all systems
  - fixed src urls


author: David Cantrell <dcantrell@redhat.com> - 8.4.0-1
changelog:
  - Upgraded to tclx-8.4.0
  - Removed patches that applied to the old build method for tclx
  - Removed Tcl and Tk doc archives


author: Jens Petersen <petersen@redhat.com> - 8.3.5-6
changelog:
  - add unversioned symlinks to the static libs (Dave Botsch, 149734)
  - rebuild with gcc 4
    - add tclx-8.3.5-clock_t-gcc4.patch to skip clock_t test in configure
    - buildrequire autoconf213


author: Jens Petersen <petersen@redhat.com> - 8.3.5-1
changelog:
  - new package split out from tcltk
  - update to 8.3.5 release
  - update source url
  - no longer need tclx-8.3-argv.patch and tclx-8.3-helpdir.patch
  - new devel and doc subpackages
  - set TCLX_INST_LIB for configure
  - add symlink for libtkx.so too
  - clean build remnants from tclxConfig.sh and tkxConfig.sh
  - rename memory.n to Memory.n, since tcl provides memory.n
  - move help and manpages to -doc subpackage
  - filtered out non-tclx changelog entries
  - define tcltk_ver and use it
  - include copy of tcl and tk manpages for buildhelp and
    apply tclx-8.3.5-tcltk-man-help.patch to point at them


author: Jens Petersen <petersen@redhat.com> - 8.3.5-84
changelog:
  - link all libs with DT_SONAME using tcl.m4 patch (#81297)
  - drop synthetic lib provides
  - remove obsolete patches from srpm
  - update buildrequires
  - use buildroot instead of RPM_BUILD_ROOT
  - install all man pages under mandir, instead of moving some from /usr/man
  - introduce _genfilelist macro for clean single-sweep find filelist generation
    for each package
  - use perl to remove buildroot prefix from filelists


author: Jens Petersen <petersen@redhat.com> 8.3.5-77
changelog:
  - build and install tclx with _libdir (not libdir!)
  - fix summary-not-capitalized for tclx, tcllib, tcl-html


author: Jens Petersen <petersen@redhat.com> 8.3.5-76
changelog:
  - make it build on x86_64 (details below)
  - don't explicitly update config.{guess,sub} since %configure does it for us
  - build and install tclx and tkx with INST_RUNTIME files under datadir, and
    EXEC_RUNTIME file under libdir
  - generate filelists from datadir and not from mandir from now on


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update url for tcl, tk, tclx, itcl, tcllib
  - build without all makecfg patches for now
    - in particular use upstream versioned library name convention
  - add backward compatible lib symlinks for now
  - use make's -C option rather than jumping in and out of source dirs
    during install
  - use INSTALL_ROOT destdir-like make variable instead of makeinstall
    for all subpackages except tix and itcl


author: Adrian Havill <havill@redhat.com>
changelog:
  - re-enable glibc string and math inlines; recent gcc is a-ok.
  - optimize at -O2 instead of -O
  - rename "soname" patches related to makefile/autoconf changes
  - added elf "needed" for tk, tclx, tix, itk
  - removed warnings from tclX


author: Adrian Havill <havill@redhat.com>
changelog:
  - updated tclX to the latest version
  - fixed tclX 8.3's busted help install
  - eliminated make TK_LIB kludge for multiple math libs for tclX
  - used %makeinstall to brute force fix any remaining unflexible makefile dirs


author: Adrian Havill <havill@redhat.com>
changelog:
  - refresh all sources to latest stable (TODO: separate expect/expectk)
  - massage out some build stuff to patches (TODO: libtoolize hacked constants)
  - remove patches already rolled into the upstream
  - removed RPATH (bugs 45569, 46085, 46086), added SONAMEs to ELFs
  - changed shared object filenames to something less gross
  - fixed tclX shell's argv parsing (bug 47710)


author: Tomas Janousek <tjanouse@redhat.com> - 7.6-40.4
changelog:
  - replaced the hostname resolving patch (#220015):
  - resolve the address given to hosts_ctl to hostname, if hostname not given
    (#220015)
  - compare localhost and localhost.localdomain as the same (#196326, #246216)


author: Tomas Janousek <tjanouse@redhat.com> - 7.6-40.3
changelog:
  - resolve hostnames in hosts.{allow,deny}, fixes #220015, #196326
  - unblock and catch SIGCHLD from spawned shell commands,
    fixes #112975 (#241357)
  - don't discard exits from other child processes than the spawned one, fixes


author: Nalin Dahyabhai <nalin@redhat.com> 7.6-32
changelog:
  - link libwrap.so against libnsl, on which it depends
  - add default (weak) versions of allow_severity and deny_severity to the shared
    library so that configure tests can find it correctly


author: Harald Hoyer <harald@redhat.de> 7.6-29
changelog:
  - shared library generated and added #75494
  - added security patch tcp_wrappers-7.6-sig.patch
  - compile and link with -fPIC -DPIC


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - permit hosts.{allow,deny} to be assembled from included components (#17795).
  - permit '*' and '?' wildcard matches on hostnames (#17847).


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.14-17.2
changelog:
  - Fix tcsh obeys printexitvalue for back-ticks
    Resolves: #640252
  - Remove extra fork when tcsh processes backquotes
    Resolves: #640251


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.14-17
changelog:
  - Revert "selector out of range" patch
    Resolves: #495642
  - Fix printing of multi-byte character
    Resolves: #502474
  - Fix tcsh %j prompt formatting sequence overrides all other formatting
    Resolves: #461836
  - Fix various globbing problems
    Resolves: #529425, #529703


author: Vitezslav Crhonek <vcrhonek@rehat.com> - 6.14-14
changelog:
  - Fix $name[selector] doesn't fail when selector is out of range
    Resolves: #435398
  - Fix description of builtin command 'set' in tcsh manpage
    Resolves: #430459
  - Fix strings which begin with '0' are not recognized as octal numbers
    Resolves: #438109
  - Fix tcsh scripts with multiple case statement with end keywords
    break with error
    Resolves: #436956
  - Fix calculation order of operators description in tcsh manpage
    Resolves: #442536
  - Fix memoryuse description in tcsh manpage
    Resolves: #437095
  - Change config_f.h to use system malloc()
    Resolves: #443643


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.14-13
changelog:
  - Fix UTF-8 Japanese character is garbled in tcsh script in
    a certain situation
    Resolves: #453785


author: Miloslav Trmac <mitr@redhat.com> - 6.14-7
changelog:
  - Fix a crash when reading scripts with multibyte characters (#183267)
  - Block SIGINT while waiting for children (#177366)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-12
changelog:
  - Don't ship the HTML documentation (generated from the man page, contains
    also a copy of the man page)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-7
changelog:
  - Define $HOSTTYPE and $MACHTYPE for ppc64 and s390 (#115531),
    I hope that finally covers all architectures.


author: Miloslav Trmac <mitr@redhat.com> - 6.13-6
changelog:
  - Define $HOSTTYPE and $MACHTYPE also on IA-64 and s390x (#115531)
  - Don't close sockets to avoid file descriptor conflits with nss_ldap (#112453)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-5
changelog:
  - Fix HTML documentation generation, second attempt (#60664)
  - Set dspmbyte using nl_langinfo(CODESET) if possible, should cover all
    cases where lang.csh was correctly setting dspmbyte (#89549)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-2
changelog:
  - Make comparisons for ranges in bracket expressions symmetric (#59493)
  - Run perl2html with LC_ALL=C to workaround what seems to be a perl bug
    (#60664)
  - Define $HOSTTYPE and $MACHTYPE on x86_64 (#115531)
  - Fix setting of O_LARGEFILE (#122558)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-1
changelog:
  - Update to tcsh-6.13.00
  - Fix charset headers in some of the translations
  - Convert translated messages to LC_CTYPE locale
  - Fix automatic dspmbyte setting


author: Adrian Havill <havill@redhat.com>
changelog:
  - use <time.h> instead of <sys/time.h> for pickier lib (#25935)
  - allow arguments for login shells (#19926)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - patch for using PATH_MAX instead of some silly internal #defines for
    variables that handle filenames.


author: Jason Vas Dias <jvdias@redhat.com> - 1:0.17-31
changelog:
  - bug 143929 / 145004 : fix race condition in telnetd on wtmp lock 
  - when cleanup() is entered from main process and in signal
  - handler


author: Harald Hoyer <harald@redhat.de>
changelog:
  - fixed security issues (#50335)
  - patched the patches to fit the 5x version
  - one world -> one spec file for all versions ;)


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - update to 0.17
  - apply latest changes from CVS to telnet client, enable IPv6
  - BuildPreReq ncurses-devel


author: Antti Andreimann <Antti.Andreimann@mail.ee>
changelog:
  - fixed the problem with escape character (it could not be disabled)
  - changed the spec file to use %setup macro for unpacking telnet-client


author: Nalin Dahyabhai <nalin@redhat.com> 1:5.4-2
changelog:
  - mingetty sets $TERM to 'linux', so switching between monochrome and color by
    playing with the 'console' alias gets us nowhere; back to noarch for now
    (Bill Nottingham)


author: Nalin Dahyabhai <nalin@redhat.com> 1:5.4-1
changelog:
  - update to current upstream termcap, building to match the most current
    ncurses available (#116330)
  - termcap used to be noarch, but that is impossible with per-arch patches (this
    could come back to haunt us in multilib environments if care is not taken),
    so make it arch-specific again
  - make 'console' an alias for either 'linux' or 'linux-m' depending on whether
    or not the usual console supports color -- this means 'linux' for most
    arches, and 'linux-m' for sparc*
  - add a definition for 'bterm' (bogl-bterm installs its own terminfo file)
  - use terminfo source instead of termcap source for 'kon2' (kon2 installs its
    own terminfo file)
  - approximate ncurses's --with-xterm-new as a local %{which_xterm} define


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - Patches to /etc/termcap have not been properly applied. Disabled
    Patch2:kterm (already applied) and Patch3:rxvt (not needed anymore)
  - Why are patches only applied to /etc/termcap and not the terminfo/termcap
    source file??


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add patch form Hans de Goede <hans@highrise.nl> to get the termcap
    descriptions in sync with the terminfo (ncurses) ones
  - make it a noarch package


author: Jindrich Novy <jnovy@redhat.com> 1.76-2
changelog:
  - replace 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=i686-redhat-linux-gnu --host=i686-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info with ./configure to prevent definition of
    target, build and host for noarch package


author: Jindrich Novy <jnovy@redhat.com> 1.76-1
changelog:
  - we have separate texi2html package now (#121889)
  - fix Source0
  - BuildArchitectures -> BuildArch
  - create backups for patches


author: Elliot Lee <sopwith@redhat.com> 0.17-15
changelog:
  - Add patch4: netkit-tftp-0.17-defaultport.patch for bug #57562
  - Update to tftp-hpa-0.28 (bug #56131)
  - Remove include/arpa/tftp.h to fix #57259
  - Add resource limits in tftp-xinetd (#56722)


author: Helge Deller <hdeller@redhat.de> (0.17-13)
changelog:
  - updated tftp-hpa source to tftp-hpa-0.17
  - tweaked specfile with different defines for tftp-netkit and tftp-hpa version
  - use hpa's tftpd.8 man page instead of the netkits one


author: Helge Deller <hdeller@redhat.de>
changelog:
  - changed "wait" in xinetd file to "yes" (hpa-tftpd forks and exits) (#26467)
  - fixed hpa-tftpd to handle files greater than 32MB (#23725)
  - added "-l" flag to hpa-tftpd for file-logging (#26467)
  - added description for "-l" to the man-page


author: Helge Deller <hdeller@redhat.de>
changelog:
  - updated tftp client to 0.17 stable (#19640),
  - drop dependency on xinetd for tftp client (#25051),


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - fix to permit tftp put's (#18128).
  - startup as root with chroot to /tftpboot with early reversion to nobody
    is preferable to starting as nobody w/o ability to chroot.
  - %post is needed by server, not client. Add %postun for erasure as well.


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Remove HAVE_WAIT3 hack, tried to replace it with a requirement for an 
  autoconf with the fixed test, didn't work, put in another less-bad hack 
  instead.


author: Jens Petersen <petersen@redhat.com> - 1:8.1.4-95
changelog:
  - new package split out from tcltk
  - build with installed tcl and tk
  - build without itcl for now
  - add a tixwish symlink
  - clean build remnants from tixConfig.sh
  - move devel files to devel subpackage
  - move doc files to doc subpackage
  - filter out non-tix changelog entries


author: Jens Petersen <petersen@redhat.com> - 8.3.5-90
changelog:
  - make sure expect and itcl are linked against buildroot not installroot libs
    - add itcl3.2-tclstubs-cfg.patch so that itcl can find tclstubs in buildroot


author: Jens Petersen <petersen@redhat.com> - 8.3.5-89
changelog:
  - install tix pkgIndex under libdir and let it use datadir for WmDefault
    (#83662 and partly #45570)


author: Jens Petersen <petersen@redhat.com> - 8.3.5-85
changelog:
  - install tix library files under datadir
  - fix dangling iwidgets symlink in libdir
  - build all except tclx with _smp_mflags
  - add some requires


author: Jens Petersen <petersen@redhat.com> - 8.3.5-84
changelog:
  - link all libs with DT_SONAME using tcl.m4 patch (#81297)
  - drop synthetic lib provides
  - update tix to 8.1.4
  - include tix docs (part of #72497), except the pdf files
  - revert to itcl3.2 due to 3.2.1 config problems
  - fix iwidget libdir symlink
  - install iwidget scripts under datadir
  - remove obsolete patches from srpm
  - update buildrequires
  - use buildroot instead of RPM_BUILD_ROOT
  - install all man pages under mandir, instead of moving some from /usr/man
  - introduce _genfilelist macro for clean single-sweep find filelist generation
    for each package
  - use perl to remove buildroot prefix from filelists


author: Jens Petersen <petersen@redhat.com> 8.3.5-76
changelog:
  - make it build on x86_64 (details below)
  - add itcl_major and use it
  - patch tix so it can find itcl-3.2.1 config files
  - don't explicitly update config.{guess,sub} since %configure does it for us
  - added "--without check" rpmbuild option to disable running tests in future
  - build and install itcl with library files under datadir
  - build tix after itcl, and actually config, build and install tix itcl library
  - generate filelists from datadir and not from mandir from now on
  - install tix binary libraries in libdir


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update to tcl-8.3.5, tk-8.3.5, tcl-html-8.3.5
  - update url for tcl, tk, tclx, itcl, tcllib
  - build without all makecfg patches for now
    - in particular use upstream versioned library name convention
  - add backward compatible lib symlinks for now
  - add unversioned symlinks for versioned bindir files
  - don't apply obsolete tix dirtree patch any more (#45570)
  - set tix to epoch 1, since 8.1.3 < 8.2.0b1
  - build shared tix libs
  - use make's -C option rather than jumping in and out of source dirs
    during install
  - don't need to move itcl and tcllib man pages downunder datadir
  - include all tix files in manifest (#72497)


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update to tcl-8.3.4, tk-8.3.4 (#75600), tcllib-1.3, itcl-3.2.1,
    tix-8.1.3 (#59098)
  - drop obsolete tcl cruft, tcl refcount, tix perf patches
  - drop the crud compat dir symlinks in libdir
  - replace tclvers and tkvers by tcltkvers and use it
  - replace tcl_major and tk_major by tcltk_major and use it
  - don't explicitly provide 64bit libs on ia64 and sparc64
  - drop obsolete tix perf patch (#59098)
  - update tix build steps for 8.1.3


author: Adrian Havill <havill@redhat.com>
changelog:
  - fixed itkwish/itclsh lib problem (bug 52608)
  - make itcl install not need tclsh/wish during config/make (bug 52606)


author: Adrian Havill <havill@redhat.com>
changelog:
  - added execute bit mode for itclsh and itksh compat shells
  - re-enable glibc string and math inlines; recent gcc is a-ok.
  - optimize at -O2 instead of -O
  - rename "soname" patches related to makefile/autoconf changes
  - added elf "needed" for tk, tclx, tix, itk


author: Adrian Havill <havill@redhat.com>
changelog:
  - added itclsh/itkwish for backwards compatibility, fixed rpath (bug 46086)
  - fixed 64 bit RPM provides for dependencies


author: Adrian Havill <havill@redhat.com>
changelog:
  - refresh all sources to latest stable (TODO: separate expect/expectk)
  - massage out some build stuff to patches (TODO: libtoolize hacked constants)
  - remove patches already rolled into the upstream
  - removed RPATH (bugs 45569, 46085, 46086), added SONAMEs to ELFs
  - added all necessary header files for itcl (bug 41374)
  - made compile-friendly for IA64


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - merge "best known" patches from searching, stubs were broken.
  - tix needs -fwritable-strings (#14352).
  - create tixwish symlink.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - make sure that tix shared libraries are installed.
  - don't mess with %{_libdir}, it's gonna be a FHS pita.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to (tcl,tk}-8.2.3, expect-5.31, and itcl-3.1.0, URL's as well.
  - use perl to drill out pre-pended RPM_BUILD_ROOT.
  - configure with --enable-threads (experimental).


author: Otto Hammersmith <otto@redhat.com>
changelog:
  - fixed filelist for tix... replacing path to the expect binary in scripts
    was leaving junk files around.


author: Jens Petersen <petersen@redhat.com> - 8.4.9-3
changelog:
  - tk-devel requires tcl-devel and xorg-x11-devel instead of XFree86-devel
  - use sed instead of perl for fixing tkConfig.sh
    - buildrequire sed instead of perl
  - buildrequire xorg-x11-devel instead of XFree86-devel
  - rebuild with gcc 4


author: Jens Petersen <petersen@redhat.com> - 8.4.7-2
changelog:
  - move pkgIndex.tcl back into /usr/lib/tk8.4 so that multilib
    parallel installs works (135310)
    - drop tk-8.4.5-pkgIndex-loc.patch
    - remove any compat symlink present before installing
    - do not generate compat symlink after installing


author: Jens Petersen <petersen@redhat.com> - 8.4.7-1
changelog:
  - update to 8.4.7
    - replace tk-8.4.5-no_rpath.patch with tk-8.4-no_rpath.patch
    - replace tk-8.4.5-autoconf.patch with tk-8.4-autoconf.patch


author: Mike A. Harris <mharris@redhat.com> - 8.4.5-7
changelog:
  - Removed Requires: XFree86-libs and replaced with Buildrequires: XFree86-devel
    so that the package is X11 implementation agnostic for the inclusion of
    xorg-x11 (#118482)
  - Added Requires(post,postun): /sbin/ldconfig
  - Added BuildRequires: perl, as perl is used during %install


author: Jens Petersen <petersen@redhat.com> - 8.4.5-5
changelog:
  - add tk-8.4.5-autoconf.patch and build with autoconf 2.5x
    (Robert Scheck, #116776)
  - add tk-8.4.5-pkgIndex-loc.patch to install pkgIndex.tcl in the script dir
  - use %{name} throughout for greater portability
  - add a "--with check" rpmbuild option
  - use "mkdir -p" instead of "mkdirhier" (Robert Scheck, #116774)
  - /usr/lib/tk8.4 is now a compat symlink to /usr/share/tk8.4
  - include all the private header files under /usr/include/tk-private
  - add doc files


author: Jens Petersen <petersen@redhat.com> - 8.4.5-1
changelog:
  - new package split out from tcltk
  - update to tk 8.4.5 (#88429)
  - filtered changelog for tk
  - buildrequire autoconf213 (#110583) [mvd@mylinux.com.ua]
  - remove build remnants from tkConfig.sh


author: Jens Petersen <petersen@redhat.com>
changelog:
  - update to tcl-8.3.4, tk-8.3.4 (#75600), tcllib-1.3, itcl-3.2.1,
    tix-8.1.3 (#59098)
  - drop the crud compat dir symlinks in libdir
  - package now builds without tcl or tk installed (partly #52606)
    - replace all relative paths by absolutes ones, using new tcltktop
    - give absolute paths to tcl and tk when configuring
    - give buildroot bindir path to tcllib make
    - export buildroot libdir in LD_LIBRARY_PATH when installing
  - replace tclvers and tkvers by tcltkvers and use it
  - replace tcl_major and tk_major by tcltk_major and use it
  - don't explicitly provide 64bit libs on ia64 and sparc64


author: Adrian Havill <havill@redhat.com>
changelog:
  - used %makeinstall to brute force fix any remaining unflexible makefile dirs
  - revert --enable-threads, linux is (still) not ready (yet) (bug 49251)


author: Jan Safranek <jsafrane@redhat.com> 1.0.15-1.4
changelog:
  - fix few security issues
  - Resolves: CVE -2011-0024 CVE-2011-0538 CVE-2011-1139 CVE-2011-1140
    CVE-2011-1141 CVE-2011-1143 #612240


author: Jan Safranek <jsafrane@redhat.com> 1.0.15-1
changelog:
  - upgrade to 1.0.15
  - http://www.wireshark.org/docs/relnotes/wireshark-1.0.15.html
  - fixes CVE-2010-2287 CVE-2010-2284
  - Related: #612239


author: Jan Safranek <jsafrane@redhat.com> 1.0.14-1
changelog:
  - upgrade to 1.0.14
  - http://www.wireshark.org/docs/relnotes/wireshark-1.0.14.html
  - fixes CVE-2010-1455 CVE-2010-2283 CVE-2010-2284 CVE-2010-2286 CVE-2010-2287
  - Resolves: #612239


author: Radek Vokál <rvokal@redhat.com> 0.99.7-1
changelog:
  - upgrade to 0.99.7
  - switch to libsmi from net-snmp
  - disable ADNS due to its lack of Ipv6 support
  - Resolves: #397411


author: Radek Vokál <rvokal@redhat.com> 0.99.6-1
changelog:
  - upgrade to 0.99.6
  - Wireshark could crash when dissecting an HTTP chunked response
  - Wireshark could crash while reading iSeries capture files
  - Wireshark could exhaust system memory while reading a
    malformed DCP ETSI packet
  - Wireshark could loop excessively while reading a malformed SSL packet
  - Resolves: #247623


author: Radek Vokál <rvokal@redhat.com> 0.99.5-1
changelog:
  - multiple security issues fixed (#225781)
  - CVE-2007-0459 - The TCP dissector could hang or crash while reassembling HTTP packets
  - CVE-2007-0459 - The HTTP dissector could crash.
  - CVE-2007-0457 - On some systems, the IEEE 802.11 dissector could crash.
  - CVE-2007-0456 - On some systems, the LLT dissector could crash.


author: Radek Vokál <rvokal@redhat.com> 0.99.4-1
changelog:
  - upgrade to 0.99.4, fixes multiple security issues (#211993)
  - use dist tag
  - CVE-2006-5468 - The HTTP dissector could dereference a null pointer.
  - CVE-2006-5469 - The WBXML dissector could crash.
  - CVE-2006-5470 - The LDAP dissector (and possibly others) could crash.
  - CVE-2006-4805 - Basic DoS, The XOT dissector could attempt to allocate a large amount of memory and crash.
  - CVE-2006-4574 - Single byte \0 overflow written onto the heap


author: Radek Vokál <rvokal@redhat.com> 0.99.3-1
changelog:
  - upgrade to 0.99.3
  - Wireshark 0.99.3 fixes the following vulnerabilities:
  - the SCSI dissector could crash. Versions affected: CVE-2006-4330
  - the IPsec ESP preference parser was susceptible to off-by-one errors. CVE-2006-4331
  - a malformed packet could make the Q.2931 dissector use up available memory. CVE-2006-4333


author: Miloslav Trmač <mitr@redhat.com> - 2.9.7-1.1.el5.4
changelog:
  - Add --exclude-pattern, and use it to avoid deleting /tmp/hsperfdata_*
    Resolves: #527425
  - Fix fuser invocation for names starting with '-'
    Resolves: #548932


author: Miloslav Trmač <mitr@redhat.com> - 2.9.7-1.1.el5.2
changelog:
  - Use the maximum of atime, mtime and ctime when checking whether a file is
    obsolete
    Resolves: #373301


author: Miloslav Trmac <mitr@redhat.com> - 2.9.7-1.1.el5.1
changelog:
  - Fix some format string mismatches (backport from 2.9.8)
  - Automatically exclude aquota.{group,user} files in filesystem root
    directories (backport from 2.9.10)
    Resolves: #213654


author: Miloslav Trmac <mitr@redhat.com> - 2.9.6-1
changelog:
  - Add --exclude-user (original patch by Brett Pemberton)
  - Fix too long line in /etc/cron.daily/tmpwatch


author: Miloslav Trmac <mitr@redhat.com> - 2.9.3-1
changelog:
  - Silently ignore ENOENT if somebody removes files faster than us (#154960)
  - Handle failures to exec fuser
  - Fix check for negative grace periods


author: Miloslav Trmac <mitr@redhat.com> - 2.9.1-1
changelog:
  - Add --exclude, use it to preserve X socket directories (#107069)
  - Allow multiple directory arguments with relative paths (#91097)
  - Don't manually strip the binary


author: Mike A. Harris <mharris@redhat.com> 2.9.0-1
changelog:
  - Added Solaris/HPUX support to tmpwatch via patch from Paul Gear (#71288)
  - Rebuild in rawhide as 2.9.0-1


author: Mike A. Harris <mharris@redhat.com> 2.8.3-1
changelog:
  - Added support for large files with 64bit offsets by adding to CFLAGS
    -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 bug (#56961)


author: Preston Brown <pbrown@redhat.com> 2.8-1
changelog:
  - added a "nodirs" option which inhibits removal of empty directories.
  - Integrated race condition fixes from Martin Macok (#50148)
  - do not try to remove ext3 journal files (#50522)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - Patch from enrico.scholz@informatik.tu-chemnitz.de allows concurrent 
    usage of mtime, ctime, and atime checking (#19550).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use execle() instead of system() to get the correct return code, fixes from
    Jeremy Katz <katzj@linuxpower.org>


author: Preston Brown <pbrown@redhat.com>
changelog:
  - support for CTIME from jik@kamens.brookline.ma.us
  - fixes for fuser checks from Ian Burrell <iburrell@digital-integrity.com>.
  - remove directories when empty without --all flag, to be consistent w/docs.


author: Paul Gear <paulgear@bigfoot.com>
changelog:
  - HP-UX port (including doco update)
  - Tweaked Makefile to allow installation into different base directory
  - Got rid of GETOPT_... defines which didn't do anything, so that short
    equivalents for all long options could be defined.
  - Fixed bug in message() where 'where' file handle was set but unused
  - Changed most fprintf() calls to message()


author: Preston Brown <pbrown@redhat.com>
changelog:
  - I am the new maintainer
  - fixed cleanup of directories
  - added --quiet flag
  - freshen manpage
  - nice patch from Kevin Vajk <kvajk@ricochet.net> integrated


author: Erik Troan <ewt@redhat.com>
changelog:
  - added man page to package
  - uses a buildroot and %attr
  - fixed error message generation for directories
  - fixed flag propagation


author: Karsten Hopp <karsten@redhat.de> 0.17.3-3
changelog:
  - don't check for sizeof(long), the result isn't used anywhere and
    causes problems with multilib installs


author: Karsten Hopp <karsten@redhat.de> 0.16.5-1
changelog:
  - update to 0.16.5
  - run libtoolize to fix config.sub
  - fix _libdir
  - fix Group:
  - fix URLs
  - remove obsolete patch


author: Guy Streeter <streeter@redhat.com>
changelog:
  - unset the TERMINFO env var before running tic in %post, so
    it puts the compiled files in the right place.
  - require ncurses and dialog


author: Henri Gomez <hgomez@slib.fr>
changelog:
  - 0.16.1 RPM release 2 
  - Dave McKenzie's cursor positioning fixes
  - Scott Klement fixes to lp5250d, auto-enter field handling, 
    field plus & field minus key handling , FER state key handling


author: Henri Gomez <hgomez@slib.fr>
changelog:
  - 0.16.0
  - many fixes, take a look at ChangeLog
  - compiled on Redhat 6.1 box plus updates with rpm-3.0.5


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.7
  - Removed config.guess and config.sub from CVS since they should be
    provided by autogen.sh.
  - Added --enable-old-keys switch to configure to compile in the old
    keyboard handler (preparation for 0.15.7).
  - Fixed bugs with handling response code for printer sessions.
  - Added a response code/error message lookup table so that we can get
    the error message in Plain English (tm).
  - Apply patch from Mike Madore regarding IBMTRANSFORM set incorrectly
    (for printer sessions).
  - Documented `-P cmd' option in usage message, removed `-p' option to
    indicate print session as `-P cmd' is required for a working session
    anyway.
  - Fixed typo in new key-parsing code preventing PgDn from working.
  - Added code to handle Esc+Del = Ins vt100 key mapping.
  - Added stuff to XTerm resources to turn on real underlining and turn
    off silly color-instead-of-underline mode.
  - Throw away weird keys we get from ncurses4 after before first
    keypress.
  - Implemented FER (Field-Exit Required) state (not tested).
  - Use 'TERM' to determine if terminal is an xterm or xterm-5250, as it
    *works* :) (Thanks to Frank Richter for pointing out bug).
  - Apply Frank Richter's cursor-position-on-status-line patch.
  - Implement rest of keys for #defined USE_OWN_KEY_PARSING.
  - Finally object-orientized translation map stuff, but will have to be
    modified later to handle wide characters/DBCS characters/Unicode -
    however we intend to support different character sets better.
  - In Field Exit handling for signed numeric fields, don't NUL-out the last
    (sign) position of the field - this is what Field- and Field+ are for.
  - Home key when already in home position should send the Home aid code,
    even when we have a pending insert.  Also, home key should move to the
    beginning of the *first non-bypass field* not the *current field* when
    there is no pending insert (IC address).
  - Clear pending insert flag on Clear Unit or Clear Unit Alternate command.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.6
  - Reported by Phil Gregory - display is not inhibited and cursor is not in
    proper place after Write Error Code.
  - Implemented Read Immediate Alternate and Read MDT Fields Alternate commands,
    modified tn5250_session_query_reply to indicate that we now support them to
    the host.
  - Implemented TD (Transparent Data) order.  There is apparently nowhere to
    indicate this to the host. (This may have been the cause of earlier binary
    data issues).
  - Implemented MC (Move Cursor) order.  This is now indicated to the host.
  - Move remaining keyboard handling from session.c to display.c, make
    tn5250_display_waitevent NOT return keyboard events. (Might we want to
    pass along ones we don't understand?  Nah...)
  - Save/restore message line when Write Error Code is used by the host to
    inhibit display.  Also, use the correct message line (according to the
    format table header).
  - Added refresh() call to cursesterm.c.  Hopefully, this will resolve the
    80 -> 132 column switch refresh issues reported by some users.
  - Wrote a quick hack of a Perl script to insert Robodoc comment headers
    for all the functions (and manually did all the structures).  Yeah, it's
    ugly, but no-one produces a tool as good as Javadoc which works on C.
  - tn5250_dbuffer_send_data_for_fields(): A *SET* bit inhibits the transmission
    of field data, not a clear one.  Also, fine point of spec, all three aid key
    bytes must be present before the 5294 controller will obey any of them.
  - Carey Evans' suggestions for new xt5250 script portability, security
    incorporated.
  - xt5250: Now changes window title to name of host.
  - cursesterm.c: Now obeys the information returned from ENQ about what
    type of terminal, and only uses xterm resize escape when on an xterm
    again.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.5
  - Extensively modified xt5250 script to prompt for hostname if not given,
    automagically use xrdb to load the keyboard mappings.  Inspired by Henri
    (Thanks!)
  - Renamed Xdefaults to xt5250.keys, installs in $pkgdatadir, also
    installs Linux keyboard maps there.
  - Removed smacs, rmacs, and acsc from 5250.terminfo - we don't use them and
    they don't seem to work under an xterm.  Makes 'dialog' draw all sorts of
    funny looking characters.
  - If installing on Linux system, automatically 'tic 5250.terminfo' if
    tic command is found (and user is root).
  - Fixed bit-ordering issue causing beeps/screen flashes all the time
    (hopefully).
  - Happy Y2K!
  - Changed handling of Field+ and Field- in regards to number-only-type
    fields.
  - No longer ignores the function key bits in the format table header.  This
    means that we won't transmit the field data for a function key unless the
    AS/400 has requested it.
  - Rolled Tn5250Table functionality into Tn5250DBuffer, removed
    formattable.[ch] and resulting duplicate functionality in display.c
  - Apparently, the AS/400 and S/36 differ in how they send the client the
    Restore Screen data.  The AS/400 just sends the data raw, while the
    System/36 prefixes it with a X'04' X'12' (Restore Screen) opcode.  This
    is now ignored.
  - Removed portsnoop. It doesn't belong here and there's better stuff out
    there (check freshmeat.net).  nc seems to work well, and is installed on
    most distributions by default.
    formattable.[ch] and resulting duplicate functionality in display.c
  - Apparently, the AS/400 and S/36 differ in how they send the client the
    Restore Screen data.  The AS/400 just sends the data raw, while the
    System/36 prefixes it with a X'04' X'12' (Restore Screen) opcode.  This
    is now ignored.
  - Removed portsnoop. It doesn't belong here and there's better stuff out
    there (check freshmeat.net).  nc seems to work well, and is installed on
    most distributions by default.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.4
  - Rewrite of screen/format table save/restore code to generate Write to Display
    commands and orders.  This should even allow you to resume a session with
    a different emulator and have the restore screen feature still work.  This
    results in a noticable slowdown in situations where the save screen command
    is used.
  - Fixes for End key behavior.
  - Fixes for Del key behavior, other keys which weren't setting the field's
    modified flag.
  - Buffered keystrokes will now cause the display to update.
  - Some 'binary' characters now accepted as data characters.
  - CC1/CC2 bytes in Read MDT Fields/Read INput Fields commands were not being
    handled.
  - Partial work on restructuring... Auto Enter fields now work again.
  - Updates to documentation and NEWS, including information about the FAQ and
    mailing list archives.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.3
    When using --with-slang configure option, no longer cores after signon
    screen.
    When using debug:tracefile syntax, no longer cores after signon screen.
    Fixed assertion found by Sean Porterfield regarding 132-column display.
    Slight work to reduce number of screen updates, although this isn't
    finished.
    Some work on solidifying the lib API.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.2
   Field Exit and Field + are now seperate functions. '+' in numeric field
    maps to Field +.  Field + changes the sign of the number like it should.
  - Re-implemented transmitting signed fields to host.
  - Re-implemented Field -.
  - Numeric Only and Signed Number field types are handled according to spec
    now, even though the spec is really weird about how they are handled
    (The last digit's zone is changed on Numeric Only on Field -/+, but the
    sign position is changed from ' ' to '-' with Field -/+, and the zone
    shift for that one takes place at transmit.)
  - Now ignore garbage keys again.  Why are we getting two decimal 410s when
    we type the first character?  This doesn't make sense unless it's related
    to how we detect the xterm.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.15.1
  - 3/4ths of the restructuring to make it feasible to use lib5250 for display
    services for applications has been done.
  - Lots of cleanup - no longer has duplicate field value data, nor does it have
    many different componenets having a different perception of what the current
    field is.
  - Implemented terminal bells.  Whistles yet to come.
  - Some minor stuff.  Field Exit Required fields now require field exit, for
    example.


author: Henri Gomez <gomez@slib.fr>
changelog:
  - 0.14
  - Full FreeBSD support, see the README and other files in the freebsd/
    directory.  Special thanks to Scott Klement for this (I've put his name all
    over the ChangeLog for this -- this way, it's not _my_ fault <g>).
  - Linux-specific files moved to linux/ subdir.
  - README files updated - now more clear on how to set up X Windows support.
  - Field Minus sequence (Esc+M) added.
  - Dup key support added.
  - Small field exit bug fixed.
  - Help key/aid code implemented.
  - Fix per Carey Evans for handling right-blank fields.
  - Reset key now works even when keyboard is locked.  Possible but unlikely bug
    where reset key could cause the next keystroke to be ignored is fixed.
  - C programs which use stdin/stdout will now clear the input line properly.
  - A small fix to format table handling code with the Repeat to Address order.
    This problem may never have been observed, but hey...


author: Miloslav Trmac <mitr@redhat.com> - 1.88-3.el5.1
changelog:
  - Preserve application exit code
    Resolves: #210893
  - Don't use PAM data after it was freed
    Resolves: #211188


author: Martin Bacovsky <mbacovsky@redhat.com> 1.86-1
changelog:
  - fix userpasswd - Query window pops up three times if cancelling passwd (#202924)
  - Serbian latin script translation added (#203003)


author: Jindrich Novy <jnovy@redhat.com> 1.85-1
changelog:
  - fix userpasswd - don't crash if pam produces multi-line output (#175735)
    Thanks to toddp@bestweb.net
  - added Serbian translation (#176152)


author: Jindrich Novy <jnovy@redhat.com> 1.83-1
changelog:
  - accept gecos information on commandline for userinfo,
    patch by mclasen@redhat.com (#173232)
  - update translations


author: Jindrich Novy <jnovy@redhat.com> 1.82-1
changelog:
  - don't use pam_stack.so
  - introduce userformat to better handle device formatting
    and removing usermount from menus (#132559)


author: Jindrich Novy <jnovy@redhat.com> 1.80-1
changelog:
  - fix "Unknown error" when password is mistyped in userpasswd (#135500)
  - add icons to windows for usermode-gtk applications (#155867)
  - add missing checks for some PAM error codes
  - fix ungettextized error message
  - update translations


author: Jindrich Novy <jnovy@redhat.com> 1.78-1
changelog:
  - pam-panel-icon has popup menu to choose to forget/keep
    authentization by right clicking as usual for other panel applets (#75845)
  - fix race condition (#142254)


author: Jindrich Novy <jnovy@redhat.com> 1.77-1
changelog:
  - preserve LANGUAGE environment variable in userhelper (#82300)
  - use badge instead of keyring icon for pam-panel-icon (#122487)
  - icon is not showed in the panel when logged as root (#75234)
  - use new environment variable USERHELPER_UID to identify
    an user who executed an application via userhelper  (#116186)


author: Jindrich Novy <jnovy@redhat.com> 1.76-1
changelog:
  - fix dependencies to Perl-XML-Parser #124170
  - use pamconsole instead of user in /etc/fstab to let
    usermount work with hal #139820


author: Jindrich Novy <jnovy@redhat.com> 1.75-1
changelog:
  - make pam-panel-icon using localized strings (#138609)
  - update translations
  - fix usermount to use "-I" option only for vfat and msdos fs
  - fix Makefile.am to not to use "Release" from spec to name dist tarballs


author: Jindrich Novy <jnovy@redhat.com> 1.74-1
changelog:
  - add patch from Mathew Miller (mattdm@mattdm.org) to use
    own user's password instead of root's in authentization
    (the user must be a member of specific group to enable it)


author: Jindrich Novy <jnovy@redhat.com> 1.73-1
changelog:
  - add support to configure.in for more languages
  - update translations from upstream
  - generate build scripts by autogen.sh


author: Rik van Riel <riel@redhat.com> 1.72-2
changelog:
  - add dependency on passwd (bz #125010)
  - make sure the Release: isn't part of the path name and tarball name


author: Ray Strode <rstrode@redhat.com> 1.72-1
changelog:
  - remove X-Red-Hat-Base category from userinfo.desktop
  - fix `make distcheck'
  - use proper value types for Terminal keys in desktop entries
  - remove upstreamed mkfs patch


author: Jindrich Novy <jnovy@redhat.com> 1.71-3
changelog:
  - installation to Preferences/More Preferences as a request
    of Ray Strode (rstrode@redhat.com) and #131605


author: Dan Walsh <dwalsh@redhat.com> 1.70-7
changelog:
  - More fixes for SELinux.  roll back to only use root for auth.
  - Add getenforce checks
  - Add root_passwd check


author: Nalin Dahyabhai <nalin@redhat.com> 1.70-1
changelog:
  - fix accidental mixup of role and type setting up new selinux context
  - log the new selinux context if we're running an app in a new selinux context


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't disable use of deprecated GLib and GTK+ APIs, reported by the
    mysterious Pierre-with-no-last-name


author: Nalin Dahyabhai <nalin@redhat.com> 1.69-1
changelog:
  - all around: cleanups
  - consolehelper: coalesce multiple messages from PAM again
  - usermount: handle user-not-allowed-to-control-mounts error correctly (#100457)
  - userhelper: trim off terminating commas when changing chfn info


author: Nalin Dahyabhai <nalin@redhat.com> 1.67-1
changelog:
  - work around GTK+ clearing DESKTOP_STARTUP_ID at gtk_init() time, so that
    startup notification actually works (#84684)


author: Nalin Dahyabhai <nalin@redhat.com> 1.66-1
changelog:
  - consolehelper-gtk: complete startup notification at startup
  - userhelper: pass startup notification data to consolehelper-gtk
  - consolehelper-gtk: setup startup notification for children if userhelper
    requests it


author: Nalin Dahyabhai <nalin@redhat.com> 1.63-2
changelog:
  - remove directory names from PAM config files, allowing the same config
    files to work for both arches on multilib boxes
  - translation updates


author: Nalin Dahyabhai <nalin@redhat.com> 1.63-1
changelog:
  - userhelper: swallow the exec'd program's exit status, which would be
    misinterpreted by consolehelper anyway


author: Nalin Dahyabhai <nalin@redhat.com> 1.62-1
changelog:
  - consolehelper: suppress dialog on successful execution
  - userhelper: return 0 on success, not 1 (what was I *thinking*?)


author: Nalin Dahyabhai <nalin@redhat.com> 1.61-1
changelog:
  - userinfo: exit properly on escape. handle site_info field properly. go
    insensitive while running child process.
  - userpasswd: exit properly on cancel.
  - all of the above: reap the child instead of checking for pipe close -- this
    way is more robust (#68578,72684).
  - usermount: run mount/umount synchronously. capture stderr and display in a
    dialog. desensitize action buttons when no filesystems are selected.
  - consolehelper: display errors if we're attempting to run bogus programs
    (#72127)
  - translation updates (#70278)


author: Nalin Dahyabhai <nalin@redhat.com> 1.60-1
changelog:
  - reconnect the "cancel" and "ok" buttons in userinfo
  - heed the cancel button when prompting for passwords in userinfo (#68578)
  - translation update


author: Nalin Dahyabhai <nalin@redhat.com> 1.59-2
changelog:
  - change "forget password" to "forget authorization", because we don't actually
    remember the password (that would be scary, #71476)
  - translation update


author: Nalin Dahyabhai <nalin@redhat.com> 1.59-1
changelog:
  - pam-panel-icon: overhaul, change the 'locked' icon to keyring-small, nix the
    'unlocked' icon
  - consolehelper-gtk: properly set up the dialog buttons (should be 'cancel/ok'
    when we're asking questions, was always 'close')
  - disappear pam_timestamp_init


author: Nalin Dahyabhai <nalin@redhat.com> 1.56-1
changelog:
  - userinfo: prevent users from selecting "nologin" as a shell (#68579)
  - don't strip binaries by default; leave that to the buildroot policy
  - use desktop-file-install


author: Nalin Dahyabhai <nalin@redhat.com> 1.54-1
changelog:
  - suppress even error messages from Xlib when consolehelper calls
    gtk_init_check() to see if the display is available


author: Nalin Dahyabhai <nalin@redhat.com> 1.52-1
changelog:
  - attempt to make prompts at the console more meaningful
  - when falling back, reset the entire environment to the user's


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - stop giving the user chances to enter the right password if we get a
    conversation error reading a response (appears to be masked by libpam)
    (#62195)
  - always center consolehelper dialog windows


author: Nalin Dahyabhai <nalin@redhat.com> 1.50-1
changelog:
  - fix userpasswd dialog message being incorrect for password changes
  - use a dumb conversation function when text mode is invoked without a tty -- if
    the service's configuration doesn't call for prompts, then it'll still work
  - port from pwdb to libuser
  - catch child-exit errors correctly again
  - fix keyboard-grabbing


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - the grand libglade/gtk2 overhaul
  - allow disabling display of GUI windows by setting "GUI=false" in the
    console.apps configuration file (default: TRUE)
  - allow disabling display of GUI windows by recognizing a magic option
    on the command-line of the program being wrapped (NOXOPTION, no default)


author: Nalin Dahyabhai <nalin@redhat.com> 1.44-1
changelog:
  - only try to call gtk_main_quit() if we've got a loop to get out of (#54109)
  - obey RPM_OPT_FLAGS, obey


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - set XAUTHORITY if we fall back to regular behavior (#26343)
  - make the suid helper 04711 instead of 04755


author: Yukihiro Nakai <ynakai@redhat.com>
changelog:
  - Some fix for Japanese environment.
  - Use gtk_set_locale() instead of setlocale()
  - Copyright update.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix the /usr/bin/shutdown wrapper so that root can call shutdown
  - only include the /usr/bin/shutdown wrapper on 6.x
  - also sanitize LC_MESSAGES
  - tweak sanitizing checks (from mkj)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix incorrect user name
  - add a shell wrapper version of /usr/bin/shutdown
  - build for 6.x errata
  - bump revision to upgrade the errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix stdin/stdout redirection shenanigans (#11706)
  - fix authentication and execution as users other than root
  - make sure the right descriptors are terminals before dup2()ing them
  - cut out an extra-large CPU waster that breaks GUI apps


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - install translations
  - fixup a messy text string
  - make "Mount"/"Unmount" translatable
  - stop prompting for passwords to shut down -- we can hit ctrl-alt-del anyway,
    and gdm users can just shut down without logging in


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - strip all binaries by default
  - add the name of the program being run to the userhelper dialog
  - add a graphic to the userhelper-wrap package
  - add a button to jump straight to nonprivileged operation when supported


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - The root exploit fix created a bug that only showed up in certain
    circumstances.  Unfortunately, we didn't test in those circumstances...


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fixed old complex broken gecos parsing, replaced with simple working parsing
  - can now blank fields (was broken by previous fix for something else...)


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - FALLBACK/RETRY in consolehelper/userhelper
  - session management fixed for consolehelper/userhelper SESSION=true
  - fix memory leak and failure to close in error condition (#3614)
  - fix various bugs where not all elements in userinfo got set


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - better check for X availability
  - center windows to make authentication easier (improve later with
    transients and embedded windows where possible)
  - applink -> applnk
  - added a little padding, especially important when running without
    a window manager, as happens when running from session manager at
    logout time


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - updated userhelper.8 man page for consolehelper capabilities
  - moved from wmconfig to desktop entries


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - strip binaries
  - use defattr
  - fix spec file ( rm -rf $(RPM_BUILD_ROOT) is a stupid thing to do ! )


author: Otto Hammersmith <otto@redhat.com>
changelog:
  - Updated the packages... now includes userpasswd for changing passwords
    and newer versions of usermount and userinfo.  No known bugs or
    misfeatures. 
  - Fixed the file list...


author: David Knox <dknox@redhat.com> 0:5.5.23-0jpp.22
changelog:
  - Resolves: CVE-2011-0013 rhbz 675931
  - Resolves: CVE-2010-3718 rhbz 675931
  - Resolves: CVE-2011-1184 rhbz 744983
  - Resolves: CVE-2011-2204 rhbz 719181


author: David Knox <dknox@redhat.com> 0:5.5.23-0jpp.15
changelog:
  - Resolves: rhbz#217630, 217141 naming-factory-dbcp.jar missing causes
  - JNDI errors. Change made to tomcat5.conf, added javax.sql.DataSource.
  - Factory to JAVA_OPTS


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.23-0jpp.9
changelog:
  - Merge fixes from Z-Streams to incorporate fixes for:
    Resolves: rhbz#427780 rhbz#504759 rhbz#503981 rhbz#504163
    Resolves: rhbz#457727 rhbz#449917 rhbz#458635 rhbz#456216


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.23-0jpp.7.2
changelog:
  From  David Knox <dknox@redhat.com>:
  - add patch for CVE-2007-5333
    Resolves: rhbz#427780
  - add patch for CVE-2008-5515
    Resolves: rhbz#504759
  - add patch for CVE-2009-0033
  - add patch for CVE-2009-0580
    Resolves: rhbz#503981
  - add patch for CVE-2009-0783
    Resolves: rhbz#504163


author: David Knox <dknox@redhat.com> - 0:5.5.23-0jpp.8
changelog:
  - First attempt to merge in:
    Resolves: rhbz#427780 rhbz#504759 rhbz#503981 rhbz#504163
    Resolves: rhbz#457727 rhbz#449917 rhbz#458635 rhbz#456216


author: David Walluck <dwalluck@redhat.com> 0:5.5.23-0jpp.7.1
changelog:
  - add patch for CVE-2008-1232
    Resolves: rhbz#457727
  - add patch for CVE-2008-1947
    Resolves: rhbz#449917
  - add patch for CVE-2008-2370
    Resolves: rhbz#458635
  - add patch for CVE-2008-2938
    Resolves: rhbz#456216


author: Fernando Nasser <fnasser@redhat.com> - 0:5.5.23-0jpp.5
changelog:
  From jean-frederic clere <jclere@redhat.com>:
  - Patch for CVE-2007-3382 and CVE-2007-3385
    Resolves: rhbz#254156


author: Vivek Lakshmanan <vivekl@redhat.com> - 0:5.5.23-0jpp.3
changelog:
  - Remove erroneous rebuild-gcj-db for javadoc subpackage
  - Add fixes for CVE-2007-2449 and CVE-2007-2450
  - Resolves: bug 244846, bug 244817


author: Vivek Lakshmanan <vivekl@redhat.com> - 0:5.5.23-0jpp.2
changelog:
  - Rebuild
  - Add catalina.out to the rpm and set explicit permissions; tomcat ownership
  - Resolves: bug 237088


author: Vivek Lakshmanan <vivekl@redhat.com> - 0:5.5.23-0jpp.1
changelog:
  - Resolves: bug 237088 
  - Merge 0:5.5.17-8jpp.2 with sources/patches from 5.5.23
  - Build against jakarta-commons-modeler 1.1 with MODELER-15 patch


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.17-3jpp_2fc
changelog:
  - Re-enable ppc64 and s390x
  - Disable JSP pre-compilation on ppc64 and x390x (FIXME)
  - Bootstrap mode (with apisonly) build


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.17-3jpp_1fc
changelog:
  - Full build
  - Do not build on ppc64 and s390x
  - Fix servlet-api.jar path
  - Add version to catalina .so
  From Ralph Apel <rapel@redhat.com>:
  - Re-add patch to add rt.jar
  - Add mx4j JMX API and struts to classpath


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.17-3jpp_0fc
changelog:
  - Upgrade
  - Use any JTA for now
  - Try and remove exclude for sample.war
  - Bootstrap build with apisonly


author: Ralph Apel <r.apel@r-apel.de> 0:5.5.17-3jpp
changelog:
  - Create option --with apisonly to build just tomcat5-servlet-2.4-api,
    tomcat5-jsp-2.0-api and its -javadoc subpackages
  - Create option --without ecj to build even when eclipse-ecj not available
  - Drop several unnecessary export CLASSPATH=


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.17-2jpp
changelog:
  - Requires on post things that are linked to at post
    Merge changes from downstream:
  - Fix line breaks in the tomcat5 init script
  - Split preun section among main package and the two new subpackages
  - Move catalina-ant*.jar to the server-lib subpackage to avoid circular
    dependency with the main package
  - Remove leading zero from alternative priorities
  - Rebuild with new classpath-mail as javamail alternative
  - Update versions of dependencies and move them to library subpackages
  - Use only jta from geronimo-specs


author: Ralph Apel <r.apel@r-apel.de> 0:5.5.16-3jpp
changelog:
  - Drop jdtCompilerAdapter from build-jar-repository
  - Use ant-trax in static webapp build
  - Duplicate admin-webapps jars in _javadir and make them world readable
  - Direct install of common-lib and server-lib to _javadir and symlink for TC5


author: Thomas Fitzsimmons <fitzsim@redhat.com> - 0:5.5.15-1jpp_5fc
changelog:
  - Require java-gcj-compat for post and postun sections of
    servlet-2.4-api, jsp-2.0-api-javadoc and
    server-lib sub-packages, since these three packages call
    /usr/bin/rebuild-gcj-db in their post and/or postun sections.


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.12-1jpp
changelog:
  - Place jsp in its own subpackage
  - Fix alternative links to jsp and servlet
  - Fix alternative priorities to jsp and servlet
  - Create library subpackages: common-lib and server-lib
    From Vadim Nasardinov <vadimn@redhat.com> 0:5.5.12-1jpp
  - Upgrade to 5.5.12
    From Deepak Bhole <dbhole@redhat.com>
  - Fix init script so it works with SELinux


author: Fernando Nasser <fnasser@redhat.com> 0:5.5.9-1jpp
changelog:
  - Merge for upgrade
  - Change the user to tomcat from tomcat4
  - Relax permissions on appdir directory so jonas package can build
  - Remove spurious links to log4j.jar from common and server/lib
  - Remove spurious dependency on tyrex (only needed for tomcat4)
  - Make sure the main package installs first so user tomcat is created
  - Reinstate ssl code changes so that tomcat can be built with other SDKs
    and not only with Sun's or BEA's.


author: Jason Corley 0:5.5.4-12jpp
changelog:
  - Update the servletapi and servletapi-javadoc subpackages to the way proposed
    by Gary Benson (based on work by Ralph Apel) in the 5.0.30 RPMs


author: Jason Corley 0:5.5.4-10jpp
changelog:
  - Incorporate Fernando Nasser's javaxssl patch from the tomcat 5.0.28 RPM
  - Replace find ... -exec's with find | xargs


author: Jason Corley 0:5.5.4-9jpp
changelog:
  - First attempt at the whole servletapi issue
  - Replace jmxri references with mx4j
  - Build with JDK 1.4 and require a 1.4 JDK to run
  - Remove cruft
  - Clearly lost track of some stuff between changelog entries ;-)


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.27-2jpp
changelog:
  - Oops, don't require mx4j 2.0.1. 1.1.1 or later should be enough.
    jmxri won't work anymore since tc5 needs mx4j-tools.


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.27-1jpp
changelog:
  - Update to 5.0.27 (stable)
  - Don't remove tomcat4 user/group on uninstall see the mailing list
    for discussion
  - build w/ xml-apis.jar instead of xmlParserAPIs.jar (release notes 5.0.27)
  - Require junit 3.8.1 or newer (release notes 5.0.26)
  - Require jakarta-commons-dbcp 1.2.1 or newer (release notes 5.0.27)
  - Require jakarta-commons-logging 1.0.4 or newer (release notes 5.0.27)
  - Require jakarta-commons-pool 1.1 or newer (release notes 5.0.27)


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.24-1jpp
changelog:
  - Update to 5.0.24
  - Require xerces-j2 2.6.2 (release notes 5.0.21), also require ant < 1.6
    as tomcat5 doesn't seem to build cleanly with 1.6 yet.


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.19-2jpp
changelog:
  - Set JAVA_ENDORSED_DIRS by default in tomcat5.conf, it is otherwise empty
    Suggestion from Aleksander Adamowski <aleksander.adamowski@altkom.pl>


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.18-1jpp
changelog:
  - Update to 5.0.18
  - Build catalina before connectors
  - Hack connectors build
  - Require xerces-j2 2.6.0 (release notes 5.0.17)


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.16-4jpp
changelog:
  - Create TC4 user and group separately, lets TC5 work out of the box
    on Trustix (Patch from Iain Arnell)


author: Kaj J. Niemi <kajtzu@fi.basen.net> - 0:5.0.16-3jpp
changelog:
  - servletapi5 is required
  - move confdir/Catalina from admin-webapps to main package
    (otherwise we end up requiring tomcat5-admin-webapps for struts-webapps)


author: Kaj J. Niemi <kajtzu@fi.basen.net> - 0:5.0.16-2jpp
changelog:
  - Fix conflict with tomcat4 catalina-ant.jar in %_javadir by renaming it
    catalina-ant5.jar for now.


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.16-0.9.1
changelog:
  - Struts should be 1.1 or later according to the release notes
  - The /admin webapp works now as well
  - manager.xml needs to be group writeable, otherwise tomcat complains


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.16-0.6
changelog:
  - Require xerces-j2 instead of just jaxp_parser_impl
  - Require jpackage commons-logging instead of internal version


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.16-0.beta.4
changelog:
  - Place jspapi, jmxri, commons-el in common/lib as mentioned in the
    upstream RELEASE-NOTES.txt. This makes jsps actually work.


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.16-0.beta.3
changelog:
  - Separated jakarta-commons-el from tomcat
  - Require servletapi5 and jakata-commons-el
  - Added Patch #4 (tomcat5-5.0.16-cluster-pathelement.patch) which fixes
    build failure when servlet-api is renamed something else than the default
  - Added Patch #5 (tomcat5-5.0.16-skip-build-on-install.patch) which corrects
    servletapi/jspapi related build snafu on install. They're already built so
    it's OK to skip.


author: Kaj J. Niemi <kajtzu@fi.basen.net> 0:5.0.16-0.beta.1
changelog:
  - 5.0.16
  - jakarta-commons-el included here instead of somewhere else for now,
    packaging unfinished
  - Patch #3 removes dependency to jsvc.tar.gz which doesn't seem to be anywhere


author: Christopher Curran ccurran@redhat.com 5.2-11
changelog:
  - New or rewritten sections for installation, troubleshooting, networking and installation
  - Various updates for spelling, grammar and language
  - Formatting and layout issues resolved
  - Updated terminology and word usage to enhance usability and readability


author: Christopher Curran ccurran@redhat.com 5.2-7
changelog:
  - Resolves: #322761
  - Many spelling and grammar errors corrected.
  - Chapter on Remote Management added


author: - Bastien Nocera <bnocera@redhat.com> - 2.16.7-2
changelog:
  - Don't register handlers for rtsp or pnm by default, as RealPlayer
    is better suited to handle those
  Related: rhbz #318701


author: John (J5) Palmieri <johnp@redhat.com> - 1.1.4-1
changelog:
  - Update to upstream version 1.1.4 and rebuild
  - Don't build with nautilus-cd-burner on s390 platforms


author: Colin Walters <walters@redhat.com> - 0.100-2
changelog:
  - Grab patch totem-0.100-desktopfile.patch from CVS to fix
    missing menu entry (144088)
  - Remove workaround for desktop file being misinstalled, fixed
    by above patch


author: Jiri Skala <jskala@redhat.com> - 4:2.0.1-6
changelog:
  - Resolves: #461278 - max TTL value cannot be between 1 and 5
  - Resolves: #644297 - setsockopt IPV6_FLOWLABEL_MGR: Operation not permitted


author: Jiri Skala <jskala@redhat.com> - 4:2.0.1-4
changelog:
  - Resolves: #445381: traceroute gets unaligned access warnings on ia64
  - Resolves: #445571: traceroute-debuginfo package is empty


author: Robert Scheck <redhat@linuxnetz.de> 1.0.3-3
changelog:
  - enable working IPv6 support in traceroute
  - removed old compatibility links, nothing has SUID/SGID
  - added some documentation files
  - don't expand rpm macros in %changelog


author: Xose Vazquez Perez <xose.vazquez@gmail.com> 1.0.3-2
changelog:
  - license is GPL
  - remove S_ISUID from /bin/traceroute
  - description of this implementation
  - s/$RPM_BUILD_ROOT/%{buildroot}
  - man page needs 0644
  - link it agains relative paths, it works over NFS


author: Phil Knirsch <pknirsch@redhat.com> 1.4a12-20
changelog:
  - Added patch from Jesper Skriver supplied by Kaj J. Niemi to support
    draft-ietf-mpls-icmp-02.txt.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - bugfix for segfault with source routing (#13466)
  - fix bug tracerouting thru aliased ethernet addresses (#9351)


author: Than Ngo <than@redhat.com> 3.2.4-14
changelog:
  - fix #191825, buildrequire on imake
  - fix #173748, fig2dev still refers to /usr/X11R6/lib/X11/rgb.txt


author: Miloslav Trmac <mitr@redhat.com> - 1:3.2.4-8
changelog:
  - Fix at least a few obvious instances of C abuse (partly #74594 with patch by
    Sysoltsev Slawa)
  - Drop -Dcfree=free fix, not needed with current version


author: Lingning Zhang <lizhang@redhat.com> - 3.0.9-20.4
changelog:
  - modify "%post" and add "Requires(post)" in ttmkfdir.spec for fixing bug173591, bug207279, bug208122


author: Lingning Zhang <lizhang@redhat.com> - 3.0.9-20.1
changelog:
  - remove the modifying part of ttmkfdir-3.0.9/Makefile, recover the old Makefile
  - modify ttmkfdir-3.0.9-encoding-dir.patch about Makefile


author: Lingning Zhang <lizhang@redhat.com> - 3.0.9-20
changelog:
  - add ttmkfdir-3.0.9-encoding-dir.patch to fix bug #173705
  - modify ttmkfdir-3.0.9/Makefile to delete the compiling flag of "ggdb"


author: Jens Petersen <petersen@redhat.com> - 3.0.9-17
changelog:
  - replace ttmkfdir-3.0.9-defautl_enc_size.patch and
    ttmkfdir-3.0.9-crashplus.patch with ttmkfdir-3.0.9-fix-crash.patch
    to fix missing native encodings of fonts
    (Akira Tagoh, #143941)
  - buildrequire flex
  - add ttmkfdir-3.0.9-warnings.patch to silence most of compiler warnings


author: Elliot Lee <sopwith@redhat.com> 3.0.9-13
changelog:
  - Follow-on fix for the issue detailed in #118713
  - Improve performance when checking if a font has a mapping present
  - Base font file selection on the magic at the start of the file, rather than the filename


author: Yu Shao <yshao@redhat.com> 3.0.9-8
changelog:
  - patch for building package against freetype-2.1.7
  - from kanagawa jigorou (jigorou3@mail.goo.ne.jp) #114682


author: Yu Shao <yshao@redhat.com> 3.0.5-1
changelog:
  - encoding.l fix and ttc support patch 
  - default read system encodings.dir instead of the one
  - in current directory


author: Mike A. Harris <mharris@devel.capslock.lan> 3.0.2-1
changelog:
  - Changed the nonstandard RPM Group from System/Utilities to Applications/System
  - Added a new Makefile install target, and changed specfile to use makeinstall


author: Mike A. Harris <mharris@devel.capslock.lan> 3.0.1-1
changelog:
  - Imported ttmkfdir into CVS on cvs.devel and applied all patches to CVS
  - Removed patches from spec file
  - Rewrote Makefile, now uses freetype-config to autodetect CFLAGS and libs,
    allowing a lot of spec file cleanups.  Added new targets for tagging CVS,
    making tarball, and making srpm.


author: Mike A. Harris <mharris@devel.capslock.lan> 3.0.0-1
changelog:
  - Initial build.  Basically just renamed our existing ttmkfdir to version
    3.0.0 to differentiate it.  It's the same old thing as before, but is
    likely going to move to CVS for easier development.


author: Michael K. Johnson <johnsonm@redhat.com> x.2.14-1
changelog:
  - explicitly check for tux syscall not implemented (#102740)
  - explicitly express tux syscall # for s390x as well as s390 (#102740)


author: Matt Wilson <msw@redhat.com> x.2.13-1
changelog:
  - fix syscall number for ppc, ppc64 which is now 225, not 224 (#86366)
    from Julie DeWandle
  - fix buildreq for glib to be glib2


author: Michael K. Johnson <johnsonm@redhat.com> x.2.11-1
changelog:
  - Added support for 32-bit userland with 64-bit kernel
     o Requires new protocol version 3
     o major version of package matches protocol version
     o Package can be built to support protocol versions 2 and 3.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Preparing for new release:
    o  New, faster date routine
    o  Better command-line option handling
    o  Removed counttux now that tux2w3c has the -c option
    o  Fixed docroot/modulepath handling
    o  More info in tux2w3c


author: Miloslav Trmac <mitr@redhat.com> 2.2-24
changelog:
  - Don't just delete the original file when destination and current directory
    are on different filesystems


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-14
changelog:
  - Fix up the mkstemp patch, don't segfault with lacking write permissions
    (#57700)
  - Fix up man page (part 2 of #57700)
  - Fix compiler warnings


author: Tim Powers <timp@redhat.com>
changelog:
  - minor spec file cleanups
  - built for 7.1
  - use predefined RPM macros whenever possible
  - use RPM_OPT_FLAGS when building


author: Arkadiusz Mikkkkkkiewicz <misiek@misiek.eu.org>
changelog:
  - Recompiled under RedHat Linux 5.1 
  - Small changes in %build
  LANG=C
  export LANG
  unset DISPLAY
   and %files 
  - Added "Vendor:" 
  - Added Polish "Summary:" and "%description"


author: Ivana Varekova <varekova@redhat.com> - 5.52-3
changelog:
  - Resolves: #227225
    unzip fails on an NFS-mounted partition
  - Resolves: #249525
    extract on NFS out of space doesn't return errors


author: Ivana Varekova <varekova@redhat.com> 5.52-2
changelog:
  - fix bug 180078 - unzip -l causing error
  - fix CVE-2005-4667 - unzip long file name buffer overflow


author: Lon Hohberger <lhh@redhat.com> 5.50-30
changelog:
  - SECURITY Round 3: Fix up original patch (from 5.50-9) to fix
  ^V/ exploit, but still allow '-:', which the other patch (5.50-18)
  does not allow.  Never allow explicit writing to the root
  directory; force users to change there and extract it manually.


author: Lon Hohberger <lhh@redhat.com> 5.50-18
changelog:
  - SECURITY: Incorporate far cleaner patch from Ben Laurie
  <ben@algroup.co.uk> which also fixes ^V/ (quote-slash).
  Patch checks post-decode as opposed to inline as previous
  patch does.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 5.42
  - Don't strip binaries explicitly
  - build without assembly, it doesn't seem to increase performance 
  - make it respect RPM_OPT_FLAGS, define _GNU_SOURCE
  - use %{_tmppath}
  - "License:" replaces "Copyright:"
  - Update URL
  - include zipgrep
  - COPYING doesn't exist anymore, include LICENSE instead


author: Than Ngo <than@redhat.com> 2.3-5
changelog:
  - fix the mkfontdir issue for modular X
  - remove unneeded -e option from mkfontdir
  - add Prereq on mkfontdir


author: Than Ngo <than@redhat.com> 2.2-1
changelog:
  - Upgrade to upstream version 1.0.7pre26, bug #122500
  - drop NimbusRomNo9L-Medi* fonts that are included in pre26


author: Owen Taylor <otaylor@redhat.com> 2.1-1
changelog:
  - Upgrade to upstream version 1.0.7pre22
  - Massive cleanups to fonts.dir/fonts.scale handling (use mkfontscale
    instead of fonts.scale from the package, etc.)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Newer upstream version
  - Fix accidental revert of urw-fontspecific => adobe-fontspecific change
  - Tweak hints in "Nimbus Sans Regular L" a bit.


author: Than Ngo <than@redhat.com> 2.0-19
changelog:
  - update urw fonts
  - add missing ZapfDingbats font (bug #65101, #65523)
  - fixed metric troubles (bug #65522)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - use adobe-fontspecific instead of urw-fontspecific encoding name for 
    symbol font.  Fixes some java issues.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - added missing fonts.dir, fonts.scale, %post, %postun using chkfontpath
  - changed foundary from Adobe (which was a lie) to URW.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - eliminated section that adds to XF86Config
  - changed fonts to reside in /usr/share/fonts/default/URW, so they can be
    shared between X and Ghostscript (and other, future programs/applications)


author: Karel Zak <kzak@redhat.com> 2.13-0.57
changelog:
  - fix #646300 - login doesn't update /var/run/utmp properly
  - fix #726572 - import missing fsfreeze into util-linux 
  - fix #678430 - fdisk should not report error on 1gB LUNs
  - fix #699639 - mount man page is missing support for ext4/xfs
  - fix #650937 - blockdev man page missing information
  - fix #678407 - ipcs and ipcrm in wrong man section


author: Karel Zak <kzak@redhat.com> 2.13-0.55
changelog:
  - fix #245578 - "remote" PAM configuration inits the keyring at an inconvenient time
  - fix #612423 - /etc/udev/rules.d/60-raw.rules gets trashed by util-linux on update
  - fix #559302 - spurious mount warning when /bin/mount not setuid root


author: Karel Zak <kzak@redhat.com> 2.13-0.54
changelog:
  - fix #448919 - fdisk -l shows wrong partition name on device-mapper-multipath devices
  - fix #465911 - ipcs returns 0 when some errors occured. 
  - fix #470497 - blockdev man page missing information
  - fix #475509 - when executing 'mount -a', a filesystem is mounted duplicative
  - fix #488192 - login: access("/nfs-home/.hushlogin", R_OK) = -1 EACCES
  - fix #490693 - Add utempter support to "script"
  - fix #495192 - login command does not allow for switching users
  - fix #502639 - SR#1919756-remove sleep() from fdisk
  - fix #565946 - sfdisk does not ensure writes make it to disk
  - fix #513369 - flock segfaults when file name is not given
  - fix #515149 - man mount(8) doesn't describe all vfat options for non-UTF8 locale
  - fix #568194 - remount of bind mounts is not properly documented
  - fix #458055 - "cal -3" generates improperly formatted output


author: Karel Zak <kzak@redhat.com> 2.13-0.50
changelog:
  - re-fix #240131 - mkfs:bug in mkfs man page (fix typo)
  - re-fix #427183 - in repair mode, mount gives false information
  - re-fix #446648 - obsolete info in fdisk(8) man page (fix typo)


author: Karel Zak <kzak@redhat.com> 2.13-0.48
changelog:
  - fix #203869 - RHEL5: login segfaults on EOF
  - fix #456378 - RHEL5: audit log injection attack via login
  - fix #449777 - /usr/bin/logger cannot be used when /usr non-root partition
  - fix #249438 - man fstab refers to fstab-sync
  - fix #240131 - mkfs:bug in mkfs man page
  - fix #446648 - obsolete info in fdisk(8) man page
  - fix #447265 - VMware fdisk partitions
  - fix #354791 - blockdev command calls the blkpg ioctl with a wrong data structure
  - fix #444650 - mkswap defaults to v0 format on ppc64
  - fix #458437 - "swapon -a" does not complain about missing devices
  - fix #449143 - fdisk fails to warn on large disks
  - fix #446971 - sfdisk issue on large hard drives
  - fix #239721 - script: result of 'COMMAND' cannot be logged in the file typescript
  - fix #427183 - in repair mode, mount gives false information


author: Karel Zak <kzak@redhat.com> 2.13-0.46
changelog:
  - fix #324471 - CVE-2007-5191 util-linux (u)mount doesn't drop privileges
                 properly when calling helpers


author: Karel Zak <kzak@redhat.com> 2.13-0.45
changelog:
  - fix #237659 - add -r option to losetup to create a read-only loop
  - fix #235495 - mount -f does not work with NFS-mounted file system
  - fix #234303 - src.rpm does't build
  - fix #228731 - sfdisk doesn't support DM-MP device (add default heads and sectors)
  - fix #231192 - ipcs is not printing correct values on pLinux
  - fix #245533 - translation files exist, but are not being used


author: Karel Zak <kzak@redhat.com> 2.13-0.43.3
changelog:
  - fix #219569 - smbfs -> cifs (upgrade from -pre6 to -pre7 upstream version)
  - fix #218915 - fdisk -b 4K
  - remove unused patches


author: Karel Zak <kzak@redhat.com> 2.13-0.43.1
changelog:
  - fix #211827 - Can't mount with additional contexts
  - fix #213127 - mount --make-unbindable does not work
  - fix #216489 - SCHED_BATCH option missing in chrt
  - fix #216712 - issues with raw device support
    (disable raw0 usage, move the raw command to /bin, update man page)
  - fix #216664 - we need to the raw script and configuration file


author: Karel Zak <kzak@redhat.com> 2.13-0.43
changelog:
  - fix #209911 - losetup.8 updated (use dm-crypt rather than deprecated cryptoloop)
  - fix #210338 - spurious error from '/bin/login -h $PHONENUMBER' (bug in IPv6 patch)
  - fix #208634 - mkswap "works" without warning on a mounted device


author: Karel Zak <kzak@redhat.com> 2.13-0.42
changelog:
  - remove obsolete NFS code and patches (we use /sbin/mount.nfs
    and /sbin/umount.nfs from nfs-utils now)
  - move nfs.5 to nfs-utils


author: Karel Zak <kzak@redhat.com> 2.13-0.41
changelog:
  - fix #205038 - mount not allowing sloppy option (exports "-s"
    to external /sbin/mount.nfs(4) calls) 
  - fix minor bug in util-linux-2.13-mount-twiceloop.patch
  - fix #188193- util-linux should provide plugin infrastructure for HAL


author: Karel Zak <kzak@redhat.com> 2.13-0.40
changelog:
  - fix Makefile.am in util-linux-2.13-mount-context.patch
  - fix #201343 - pam_securetty requires known user to work
                  (split PAM login configuration to two files)
  - fix #203358 - change location of taskset binary to allow for early affinity work


author: Karel Zak <kzak@redhat.com> 2.13-0.32
changelog:
  - add IPv6 support to the login command (patch by Milan Zazrivec)
  - fix #198626 - add keyinit instructions to the login PAM script 
    (patch by David Howells)


author: Karel Zak <kzak@redhat.com> 2.13-0.25
changelog:
  - fix #187014 - umount segfaults for normal user
  - fix #183446 - cal not UTF-8-aware
  - fix #186915 - mount does not translate SELIinux context options though libselinux
  - fix #185500 - Need man page entry for -o context= mount option
  - fix #152579 - missing info about /etc/mtab and /proc/mounts mismatch
  - fix #183890 - missing info about possible ioctl() and fcntl() problems on NFS filesystem
  - fix #191230 - using mount --move results in wrong data in /etc/mtab
  - added mount subtrees support
  - fdisk: wrong number of sectors for large disks (suse#160822)
  - merge fdisk-xvd (#182553) with new fdisk-isfull (#188981) patch 
  - fix #181549 - raw(8) manpage has old information about dd
  - remove asm/page.h usage


author: Dan Walsh <dwalsh@RedHat.com> 2.13-0.24
changelog:
  - Remove requirement on restorecon, since we can do the same thing
  - with chcon/matchpathcon, and not add requirement on policycoreutils


author: Steve Dickson <steved@redhat.com> 2.13-0.21
changelog:
  - fix #183713 - foreground mounts are not retrying as advertised
  - fix #151549 - Added 'noacl' mount flag
  - fix #169042 - Changed nfsmount to try udp before using tcp when rpc-ing
                  the remote rpc.mountd (iff -o tcp is not specified).
                  This drastically increases the total number of tcp mounts
                  that can happen at once (ala autofs).


author: Jesse Keating <jkeating@redhat.com> 2.13-0.20
changelog:
  - Better calling of restorecon as suggested by Bill Nottingham
  - prereq restorecon to avoid ordering issues


author: Karel Zak <kzak@redhat.com> 2.13-0.16
changelog:
  - fix #181782 - mkswap should automatically add selinux label to swapfile
  - fix #180730 - col is exiting with 1 (fix util-linux-2.12p-col-EILSEQ.patch)
  - fix #181896 - broken example in schedutils man pages
  - fix #177331 - login omits pam_acct_mgmt & pam_chauthtok when authentication is skipped.
  - fix #177523 - umount -a should not unmount sysfs
  - fix #182553 - fdisk -l inside xen guest shows no disks


author: Steve Dickson <steved@redhat.com> 2.13-0.14
changelog:
  - Updated the gssd_check() and idmapd_check(), used with
    nfsv4 mounts, to looked for the correct file in /var/lock/subsys
    which stops bogus warnings.


author: Karel Zak <kzak@redhat.com> 2.13-0.13
changelog:
  - fix #174676 - hwclock audit return code mismatch
  - fix #176441: col truncates data
  - fix #174111 - mount allows loopback devices to be mounted more than once to the same mount point
  - better wide chars usage in the cal command (based on the old 'moremisc' patch)


author: Karel Zak <kzak@redhat.com> 2.13-0.11.pre6
changelog:
  - update to upstream version 2.13-pre6
  - fix #172203 - mount man page in RHEL4 lacks any info on cifs mount options


author: Karel Zak <kzak@redhat.com> 2.13-0.6.pre5
changelog:
  - update to upstream 2.13pre5
  - remove separated cramfs1.1 (already in upstream package)
  - remove odd symlink /usr/bin/mkcramfs -> ../../sbin/mkfs.cramfs
  - fix #170171 - ipcs -lm always report "max total shared memory (kbytes) = 0"


author: Karel Zak <kzak@redhat.com> 2.13-0.4.pre4
changelog:
  - fix #169628 - /usr/bin/floppy doesn't work with /dev/fd0
  - fix #168436 - login will attempt to run if it has no read/write access to its terminal
  - fix #168434 - login's timeout can fail - needs to call siginterrupt(SIGALRM,1)
  - fix #165253 - losetup missing option -a [new feature]
  - update PAM files (replace pam_stack with new "include" PAM directive)
  - remove kbdrate from src.rpm
  - update to 2.13pre4


author: Steve Dickson <steved@redhat.com> 2.13-0.3.pre3
changelog:
  - fix #170110 - Documentation for 'rsize' and 'wsize' NFS mount options
                  is misleading


author: Karel Zak <kzak@redhat.com> 2.13-0.3.pre2
changelog:
  - fix #166923 - hwclock will not run on a non audit-enabled kernel
  - fix #159410 - mkswap(8) claims max swap area size is 2 GB
  - fix #165863 - swsusp swaps should be reinitialized
  - change /var/log/lastlog perms to 0644


author: Karel Zak <kzak@redhat.com> 2.13-0.2.pre2
changelog:
  - /usr/share/misc/getopt/* -move-> /usr/share/doc/util-linux-2.13/getopt-*
  - the arch command marked as deprecated
  - removed: elvtune, rescuept and setfdprm
  - removed: man8/sln.8 (moved to man-pages, see #10601)
  - removed REDAME.pg and README.reset
  - .spec file cleanup
  - added schedutils (commands: chrt, ionice and taskset)


author: Karel Zak <kzak@redhat.com> 2.12p-9.7
changelog:
  - fix #159339 - util-linux updates for new audit system
  - fix #158737 - sfdisk warning for large partitions, gpt
  - fix #150912 - Add ocfs2 support
  - NULL is better than zero at end of execl()


author: Karel Zak <kzak@redhat.com> 2.12p-9.5
changelog:
  - fix #157656 - CRM 546998: Possible bug in vipw, changes permissions of /etc/shadow and /etc/gshadow
  - fix #159339 - util-linux updates for new audit system (pam_loginuid.so added to util-linux-selinux.pamd)
  - fix #159418 - sfdisk unusable - crashes immediately on invocation
  - fix #157674 - sync option on VFAT mount destroys flash drives
  - fix .spec file /usr/sbin/{hwclock,clock} symlinks


author: Karel Zak <kzak@redhat.com> 2.12p-8
changelog:
  - fix #154498 - util-linux login & pam session
  - fix #155293 - man 5 nfs should include vers as a mount option
  - fix #76467 - At boot time, fsck chokes on LVs listed by label in fstab
  - new Source URL
  - added note about ATAPI IDE floppy to fdformat.8
  - fix #145355 - Man pages for fstab and fstab-sync in conflict


author: Karel Zak <kzak@redhat.com> 2.12p-4
changelog:
  - added /var/log/lastlog to util-linux (#151635)
  - disabled 'newgrp' in util-linux (enabled in shadow-utils) (#149997, #151613)
  - improved mtab lock (#143118)
  - fixed ipcs typo (#151156)
  - implemented mount workaround for duplicated labels (#116300)


author: Elliot Lee <sopwith@redhat.com> 2.12p-1
changelog:
  - Update to util-linux-2.12p. This changes swap header format
    from - you may need to rerun mkswap if you did a clean install of
    FC3.


author: Steve Dickson <SteveD@RedHat.com> 2.12a-18
changelog:
  - Made NFS mounts adhere to the IP protocol if specified on
    command line as well as made NFS umounts adhere to the
    current IP protocol. Fix #140016


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Updated the NFS and NFS4 code to the latest CITI patch set
    (in which they incorporate a number of our local patches).


author: Elliot Lee <sopwith@redhat.com> 2.12a-6
changelog:
  - Fix #16415, #70616 with rdevman.patch
  - Fix #102566 with loginman.patch
  - Fix #104321 with rescuept.patch (just use plain lseek - we're in _FILE_OFFSET_BITS=64 land now)
  - Fix #130016 - remove raw.
  - Re-add agetty (replacing it with mgetty is too much pain, and mgetty is much larger)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Made the NFS security checks more explicit to avoid confusion
    (an upstream fix)
  - Also removed a compilation warning


author: Alasdair Kergon <agk@redhat.com>
changelog:
  - Add device-mapper mount-by-label support
  - Fix segfault in mount-by-label when a device without a label is present.


author: <SteveD@RedHat.com>
changelog:
  - Updated the nfs-mount.patch to correctly 
    handle the mounthost option and to ignore 
    servers that do not set auth flavors


author: <SteveD@RedHat.com>
changelog:
  - Make RPC error messages displayed with -v argument
  - Added two checks to the nfs4 path what will print warnings
    when rpc.idmapd and rpc.gssd are not running
  - Ping NFS v4 servers before diving into kernel
  - Make v4 mount interruptible which also make the intr option on by default


author: <SteveD@RedHat.com>
changelog:
  - Reworked how the rpc.idmapd and rpc.gssd checks were
    done due to review comments from upstream.
  - Added rpc_strerror() so the '-v' flag will show RPC errors.


author: <SteveD@RedHat.com>
changelog:
  - Added two checks to the nfs4 path what will print warnings
    when rpc.idmapd and rpc.gssd are not running.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added pesudo flavors for nfsv4 mounts.
  - Added BuildRequires: libselinux-devel and Requires: libselinux
    when WITH_SELINUX is set.


author: Elliot Lee <sopwith@redhat.com> 2.11y-31
changelog:
  - Add patch140 (alldevs) to fix #101772. Printing the total size of
    all devices was deemed a lower priority than having all devices
    (e.g. /dev/ida/c0d9) displayed.


author: Elliot Lee <sopwith@redhat.com> 2.11y-1
changelog:
  - Update to 2.11y
  - Fix #80953
  - Update patch0, patch107, patch117, patch120 for 2.11y
  - Remove patch60, patch61, patch207, patch211, patch212, patch119, patch121
  - Remove patch122, patch200


author: Elliot Lee <sopwith@redhat.com> 2.11w-2
changelog:
  - Remove some crack/unnecessary patches while submitting stuff upstream.
  - Build with -D_FILE_OFFSET_BITS=64


author: Elliot Lee <sopwith@redhat.com> 2.11n-19
changelog:
  - Make a note here that this package was the source of the single change 
  contained in util-linux-2.11f-18 (in 7.2/Alpha), and also contains the 
  rawman patch from util-linux-2.11f-17.1 (in 2.1AS).
  - Package has no runtime deps on slang, so remove the BuildRequires: 
  slang-devel.


author: Elliot Lee <sopwith@redhat.com> 2.11n-17
changelog:
  - Fix teg's swapondetect patch to not print out the usage message when 
  'swapon -a -e' is run. (#66690) (edit existing patch)
  - Apply hjl's utmp handling patch (#66950) (patch116)
  - Fix fdisk man page notes on IDE disk partition limit (#64013) (patch117)
  - Fix mount.8 man page notes on vfat shortname option (#65628) (patch117)
  - Fix possible cal overflow with widechars (#67090) (patch117)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - adjust mainframe patches to apply to current rpm
  - do not include fdisk until it is fixed to work on mainframe


author: Elliot Lee <sopwith@redhat.com> 2.11n-10
changelog:
  - Finish fixing #60675 (ipcrm man page), updated the patch.
  - Fix #61203 (patch114 - dumboctal.patch).


author: Elliot Lee <sopwith@redhat.com> 2.11n-7
changelog:
  Fix various bugs:
  - Add patch110 (skipraid) to properly skip devices that are part of a RAID array.
  - Add patch111 (mkfsman) to update the mkfs man page's "SEE ALSO" section.
  - remove README.cfdisk
  - Include partx
  - Fix 54741 and related bugs for good(hah!) with patch113 (ctty3)


author: Elliot Lee <sopwith@redhat.com> 2.11n-3
changelog:
  - Add util-linux-2.11n-ownerumount.patch (#56593)
  - Add patch102 (util-linux-2.11n-colrm.patch) to fix #51887
  - Fix #53452 nits.
  - Fix #56953 (remove tunelp on s390)
  - Fix #56459, and in addition switch to using sed instead of perl.
  - Fix #58471
  - Fix #57300
  - Fix #37436
  - Fix #32132


author: Elliot Lee <sopwith@redhat.com> 2.11f-17
changelog:
  - Add patch38 (util-linux-2.11f-ctty2.patch) to ignore SIGINT/SIGTERM/SIGQUIT in the parent, so that ^\ won't break things.


author: Elliot Lee <sopwith@redhat.com> 2.11f-16
changelog:
  - Merge patches 36, 75, 76, and 77 into patch #37, to attempt resolve all the remaining issues with #54741.


author: Elliot Lee <sopwith@redhat.com> 2.11f-13
changelog:
  - Patch/idea #76 from HJL, fixes bug #54741 (race condition in login 
  acquisition of controlling terminal).


author: Bill Nottingham <notting@redhat.com>
changelog:
  - revert the patch that calls setsid() in login that we had reverted
    locally but got integrated upstream (#46223)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.11b-1
changelog:
  - Fix up login for real (a console session should be the controlling tty)
    by reverting to 2.10s code (#36839, #36840, #39237)
  - Add man page for agetty (#39287)
  - 2.11b, while at it


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.11a-3
changelog:
  - Fix up login - exiting immediately even if the password is correct
    is not exactly a nice feature.
  - Make definite plans to kill people who update login without checking
    if the new version works ;)


author: Erik Troan <ewt@redhat.com>
changelog:
  - upgraded to 2.11a (kbdrate moved to kbd, among other things)
  - turned off ALLOW_VCS_USE
  - modified mkcramfs to not use a large number of file descriptors
  - include mkfs.bfs


author: Matt Wilson <msw@redhat.com>
changelog:
  - changed Requires: kernel >= 2.2.12-7 to Conflicts: kernel < 2.2.12-7
    (fixes a initscripts -> util-linux -> kernel -> initscripts prereq loop)


author: Matt Wilson <msw@redhat.com>
changelog:
  - patched mkcramfs to use the PAGE_SIZE from asm/page.h instead of hard
    coding 4096 (fixes mkcramfs on alpha...)


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed bug #29131, where ipc.info didn't have an info dir entry,
    added the dir entry to ipc.texi (Patch58)


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated kill man page
  - added patch to fix vipw race
  - updated vipw to edit /etc/shadow and /etc/gshadow, if appropriate
  - added patch to disassociate login from tty, session, and pgrp


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed problem w/ empty extended partitions
  - added patch to fix the date in the more man page
  - set OPT to pass optimization flags to make rather then RPM_OPT_FLAG
  - fixed fdisk -l /Proc/partitions parsing
  - updated to 2.10s


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.10o
  -  fdformat: fixed to work with kernel 2.4.0test6 (Marek Wojtowicz)
  -  login: not installed suid
  -  getopt: by default install aux files in /usr/share/misc
  - update to 2.10n:
  -  added blockdev.8
  -  change to elvtune (andrea)
  -  fixed overrun in agetty (vii@penguinpowered.com)
  -  shutdown: prefer umounting by mount point (rgooch)
  -  fdisk: added plan9
  -  fdisk: remove empty links in chain of extended partitions
  -  hwclock: handle both /dev/rtc and /dev/efirtc (Bill Nottingham)
  -  script: added -f (flush) option (Ivan Schreter)
  -  script: added -q (quiet) option (Per Andreas Buer)
  -  getopt: updated to version 1.1.0 (Frodo Looijaard)
  -  Czech messages (Jiri Pavlovsky)
  - login.1 man page had not /var/spool/mail path (#16998).
  - sln.8 man page (but not executable) included (#10601).
  - teach fdisk 0xde(Dell), 0xee(EFI GPT), 0xef(EFI FAT) partitions (#17610).


author: Matt Wilson <msw@redhat.com>
changelog:
  - use snprintf - not sprintf - when doing
    sprintf ("%s\n", _("Some string")) to avoid overflows and
    segfaults.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - raw control file was /dev/raw, now /dev/rawctl.
  - raw access files were /dev/raw*, now /dev/raw/raw*.


author: Matt Wilson <msw@redhat.com>
changelog:
  - updated to util-linux 2.10c
  - deprecated IMAP login mail notification patch17
  - deprecated raw patch22
  - depricated readprofile patch24


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - hostid is now in sh-utils. On sparc, install hostid as sunhostid (#4581).
  - update to 2.9w:
  -  Updated mount.8 (Yann Droneaud)
  -  Improved makefiles
  -  Fixed flaw in fdisk


author: Christian 'Dr. Disk' Hechelmann <drdisk@tc-gruppe.de>
changelog:
  - added locale message catalogs to %file
  - added patch for non-root build
  - vigr.8 and /usr/lib/getopt  man-page was missing from file list
  - /etc/fdprm really is a config file


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9v:
  -   cfdisk no longer believes the kernel's HDGETGEO
      (and may be able to partition a 2 TB disk)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9u:
  -   Czech more.help and messages (Jiri Pavlovsky)
  -   Japanese messages (Daisuke Yamashita)
  -   fdisk fix (Klaus G. Wagner)
  -   mount fix (Hirokazu Takahashi)
  -   agetty: enable hardware flow control (Thorsten Kranzkowski)
  -   minor cfdisk improvements
  -   fdisk no longer accepts a default device
  -   Makefile fix


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9t:
  -   national language support for hwclock
  -   Japanese messages (both by Daisuke Yamashita)
  -   German messages and some misc i18n fixes (Elrond)
  -   Czech messages (Jiri Pavlovsky)
  -   wall fixed for /dev/pts/xx ttys
  -   make last and wall use getutent() (Sascha Schumann)
      [Maybe this is bad: last reading all of wtmp may be too slow.
       Revert in case people complain.]
  -   documented UUID= and LABEL= in fstab.5
  -   added some partition types
  -   swapon: warn only if verbose


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - include sfdisk (#1164)
  - fix write (#1784)
  - use positive logic in spec file (%ifarch rather than %ifnarch).
  - (re)-use 1st matching utmp slot if search by mypid not found.
  - update to 2.9o
  - lastb wants bad logins in wtmp clone /var/run/btmp (#884)


author: Jakub Jelinek <jj@ultra.linux.cz>
changelog:
  - if hwclock is to be compiled on sparc,
    it must actually work. Also, it should obsolete
    clock, otherwise it clashes.
  - limit the swap size in mkswap for 2.2.1+ kernels
    by the actual maximum size kernel can handle.
  - fix kbdrate on sparc, patch by J. S. Connell
    <ankh@canuck.gen.nz>


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - .perms patch to login to make it retain root in parent process
    for pam_close_session to work correctly


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - patch top build on the arm without PAM and related utilities, for now.
  - build hwclock only on intel


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated MCONFIG to automatically determine the architecture
  - added glibc header hacks to fdisk code
  - rdev is only available on the intel


author: Erik Troan <ewt@redhat.com>
changelog:
  - Merged Red Hat changes into main util-linux source, updated package to
    development util-linux (nearly 2.7).


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - pam.patch differentiated between different kinds of bad logins.
    In particular, "user does not exist" and "bad password" were treated
    differently.  This was a minor security hole.


author: Peter Vrabec <pvrabec@redhat.com> 1.07-10
changelog:
  - revert fix from 1.07-9
  - fix truncation of values on 32b platforms where statvfs64
    is being called on a large file system (#153259)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - build against lockdev-1.0.0-14, with
  -   swap egid and gid for lockdev's access(2) device check (#52029).
  - add (noreplace) to all config files.


author: Jeff Johnson <jbj@redhta.com>
changelog:
  - move per-system lock to 755 uucp.uucp /var/lock/uucp directory.
  - use baudboy.h to create per-device lock(s) in /var/lock.
  - comment out compress/strip, rely on rpm brp-* scripts.
  - check uuxqt arguments more carefully.


author: Florian La Roche <Florian.LaRoche@redhat.com>
changelog:
  - change perms to be root:root for the config files and
    0640,root:uucp for config files containing passwords
  - add patch from #6151 (division by zero, SIGFPE)
  - make %post work also for simple sh-versions


author: Erik Troan <ewt@redhat.com>
changelog:
  - Brian Candler fixed /usr/lib/uucp/uucico symlink
  - Added "create" entries to log file rotation configuration
  - Touch log files on install if they don't already exist to allow proper
    rotation


author: Erik Troan <ewt@redhat.com>
changelog:
  - symlinked /usr/sbin//uucico into /usr/lib/uucp
  - (all of these changes are from Brian Candler <B.Candler@pobox.com>)
  - sgid bit added on uucico so it can create lock files
  - log files moved to /var/log/uucp/ owned by uucp (so uucico can create them)
  - log rotation added
  - uses /etc/uucp/oldconfig instead of /usr/lib/uucp for old config files
  - package creates /etc/uucp and /etc/uucp/oldconfig directories
  - man pages reference the correct locations for spool and config files


author: Dodji Seketeli <dodji@redhat.com> - 1:3.5.0-3
changelog:
  - Add the following patches:
    - valgrind-3.5.0-ifunc.patch
      Supports STT_GNU_IFUNC support
    - valgrind-3.5.0-dynbss.patch
      handle prelink created split of .bss into .dynbss and .bss
      and similarly for .sbss and .sdynbss (#539874)
    - valgrind-3.5.0-DW_OP_mod.patch,
      DW_OP_mod is unsigned modulus instead of signed
    - valgrind-3.5.0-pkgconfig.patch
      fix up valgrind.pc (#551277)
    - valgrind-3.5.0-stat_h.patch
      fix build against latest glibc headers
    - valgrind-3.5.0-i686-nops.patch
      handle i686 nopw insns with more than one data16 prefix (#574889)
    - valgrind-3.5.0-dwarf4.patch
      Add some DWARF4 support
    - valgrind-3.5.0-capget.patch
      allow NULL second argument to capget (#450976)
    - valgrind-3.5.0-strcasecmp.patch
      provide a replacement for str{,n}casecmp{,_l} (#626470)


author: Dodji Seketeli <dodji@redhat.com> - 3.5.0-1
changelog:
  - Resolves: #522330
  - Rebase to upstream 3.5.0
  - Drop patches: valgrind-3.2.0-makefile.patch,
    valgrind-3.2.1-cfa-set-loc.patch, valgrind-3.2.1-glibc25.patch,
    valgrind-3.2.1-ppc-pagesize.patch, valgrind-3.2.1-intel-cache-sizes.patch,
    valgrind-3.2.1-pkg-config.patch.
  - Add a devel package (Jakub Jelinek)
  - Use ar to create fake libgcc_s*.a instead of touch (Jakub Jelinek)
  - Explicitely specify the path to GDB on the command line (Jakub Jelinek)
  - Don't force a specific set a default suppression but the upstream one
  - don't strip .debug_loc etc. from valgrind binaries (Jakub Jelinek)
  - don't run pth_cancel2 test as it hangs on x86_64 (Jakub Jelinek)
  - Overhaul handling of binaries which names are arch dependant (Jakub Jelinek)
  - Don't package *.supp.in files (Jakub Jelinek)
  - There is no more ACKNOWLEDGEMENTS file in the package (Jakub Jelinek)
  - add handling of some sbb/adc insn forms on x86_64 (Jakub Jelinek, KDE#211410)
  - add emulation of 0x67 prefixed loop* insns on x86_64 (Jakub Jelinek, #530165)
  - handle reading of .debug_frame in addition to .eh_frame (Jakub Jelinek)
  - ignore unknown DWARF3 expressions in evaluate_trivial_GX (Jakub Jelinek)
  - suppress helgrind race errors in helgrind's mythread_wrapper (Jakub Jelinek)
  - fix compilation of x86 tests on x86_64 and ppc tests (Jakub Jelinek)
  - handle many more DW_OP_* ops that GCC now uses (Jakub Jelinek)
  - handle the more compact form of DW_AT_data_member_location (Jakub Jelinek)
  - fix mmap/mprotect handling in memcheck (Jakub Jelinek, KDE#210268)


author: Jakub Jelinek <jakub@redhat.com> 3.2.1-1
changelog:
  - update to 3.2.1 bugfix release
    - SSE3 emulation fixes, reduce memcheck false positive rate,
      4 dozens of bugfixes


author: Jakub Jelinek <jakub@redhat.com> 3.1.1-3
changelog:
  - handle [sg]et_robust_list syscalls on i?86/x86_64
  - handle *at syscalls on ppc
  - ensure on x86_64 both 32-bit and 64-bit glibc{,-devel} are
    installed in the buildroot (#191820)


author: Jakub Jelinek <jakub@redhat.com> 3.1.0-2
changelog:
  - add support for DW_CFA_val_offset{,_sf}, DW_CFA_def_cfa_sf
    and skip over DW_CFA_val_expression quietly
  - adjust libc/ld.so filenames in glibc-2.4.supp for glibc 2.4
    release


author: Jakub Jelinek <jakub@redhat.com> 3.0.0-3
changelog:
  - fix amd64 handling of cwtd instruction
  - fix amd64 handling of e.g. sarb $0x4,val(%rip)
  - speedup amd64 insn decoding


author: Jakub Jelinek <jakub@redhat.com> 3.0.0-2
changelog:
  - lower x86_64 stage2 base from 112TB down to 450GB, so that
    valgrind works even on 2.4.x kernels.  Still way better than
    1.75GB that stock valgrind allows


author: Jakub Jelinek <jakub@redhat.com> 3.0.0-1
changelog:
  - upgrade to 3.0.0
    - x86_64 support
  - temporarily obsolete valgrind-callgrind, as it has not been
    ported yet


author: Jakub Jelinek <jakub@redhat.com> 2.4.0-3
changelog:
  - build some insn tests with -mmmx, -msse or -msse2 (#161572)
  - handle glibc-2.3.90 the same way as 2.3.[0-5]


author: Jakub Jelinek <jakub@redhat.com> 2.4.0-2
changelog:
  - resurrect the non-upstreamed part of valgrind_h patch
  - remove 2.1.2-4G patch, seems to be upstreamed
  - resurrect passing -fno-builtin in memcheck tests


author: Colin Walters <walters@redhat.com> 2.4.0-1
changelog:
  - New upstream version 
  - Update valgrind-2.2.0-regtest.patch to 2.4.0; required minor
    massaging
  - Disable valgrind-2.1.2-4G.patch for now; Not going to touch this,
    and Fedora does not ship 4G kernel by default anymore
  - Remove upstreamed valgrind-2.2.0.ioctls.patch
  - Remove obsolete valgrind-2.2.0-warnings.patch; Code is no longer
    present
  - Remove upstreamed valgrind-2.2.0-valgrind_h.patch
  - Remove obsolete valgrind-2.2.0-unnest.patch and
    valgrind-2.0.0-pthread-stacksize.patch; valgrind no longer
    includes its own pthread library


author: Jakub Jelinek <jakub@redhat.com> 2.2.0-6
changelog:
  - act as if NVALGRIND is defined when using <valgrind.h>
    in non-m32/i386 programs (#138923)
  - remove weak from VALGRIND_PRINTF*, make it static and
    add unused attribute


author: Jakub Jelinek <jakub@redhat.com> 2.1.2-1
changelog:
  - update to 2.1.2
  - run make regtest as part of package build
  - use glibc-2.3 suppressions instead of glibc-2.2 suppressions


author: Jeff Johnson <jbj@redhat.com> 1.9.4-0.20030228
changelog:
  - update to 1.9.4 from CVS.
  - dwarf patch from Graydon Hoare.
  - sysinfo patch from Graydon Hoare, take 1.


author: Graydon Hoare <graydon@redhat.com> 1.9.3-5.20030207
changelog:
  - add handling for separate debug info (+fix).
  - handle blocking readv/writev correctly.
  - comment out 4 overly zealous pthread checks.


author: Jeff Johnson <jbj@redhat.com> 1.9.3-4.20030207
changelog:
  - move _pthread_desc to vg_include.h.
  - implement pthread_mutex_timedlock().
  - implement pthread_barrier_wait().


author: Vivek Lakshmanan <vivekl@redhat.com> - 0:1.4-5jpp_1fc
changelog:
  - Merge with latest from JPP.
  - Remove fileversion and my_version macros.
  - Remove notexentests patch and replace with a patch to disable
  - failure on tests.


author: Gary Benson <gbenson@redhat.com>
changelog:
  - Build with servletapi5.
  - Add NOTICE file as per Apache License version 2.0.
  - Skip some failing tests.


author: Ralph Apel <r.apel at r-apel.de> 0:1.4-3jpp
changelog:
  - Adapt to jdom-1.0-1 replacing org.jdom.input.DefaultJDOMFactory
    by org.jdom.DefaultJDOMFactory in AnakiaJDOMFactory.java
    as well as using org.jdom.output.Format in AnakiaTask.java
  - Therefore require jdom >= 0:1.0-1


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.3.1-2jpp
changelog:
  - Add Epochs to dependencies.
  - Add explicit defattrs.
  - Add non-versioned javadoc symlinks.
  - Use sed instead of bash 2 extension when symlinking jars during build.
  - Use full URL in Source.
  - Fix -javadoc Group tag.
  - Drop patch in favour of ant options.
  - BuildRequire jpackage-utils and antlr (latter needed for Anakia tests).


author: Richard Bullington-McGuire <rbulling@pkrinternet.com> 1.3-1jpp
changelog:
  - 1.3 stable release
  - Updated for JPackage 1.5
  - Run JUnit regression tests as part of the build process
  - Added patch file to fix test case classpath for JUnit standard locations


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.3-0.rc1.1jpp
changelog:
  - 1.3.0rc1
  - dropped patch
  - versioned dir for javadoc
  - no dependencies for manual and javadoc packages
  - stricter dependency for demo package


author: Mark McLoughlin <markmc@redhat.com> 2.12.0-2
changelog:
  - Add patch from Alexandre Oliva <oliva@lsd.ic.unicamp.br> to fix
    more keyboard brokeness (#158713)


author: Mark McLoughlin <markmc@redhat.com> 2.10.0-4
changelog:
  - Fix various keyboarding handling issues:
     + bug #142974: caps lock not working
     + bug #140515: shift not working with some keys
     + bug #134451: over-eager key repeating


author: Mark McLoughlin <markmc@redhat.com> 2.8.0.1-1.1
changelog:
  - Don't hang with metacity's "reduced resources" mode (#134240) 
  - Improve the key repeat rate situation a good deal (#134451)


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-81
changelog:
  - 455664 adoptions of crontab orphans, forgot add buffer for list of
    orphans
  - Related: rhbz#455664


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-80
changelog:
  - 654961 crond process ignores the changes of user's home directory needs
    bigger changes of code. The fix wasn't applied, detail in comment#11.
  - Related: rhbz#249512


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-79
changelog:
  - CVE-2010-0424 vixie-cron, cronie: Race condition by setting timestamp 
    of user's crontab file, when editing the file
  - Resolves: rhbz#741534


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-78
changelog:
  - 455664 adoptions of crontab orphans
  - 249512 crontab should verify a user's access to PAM cron service
  - Resolves: rhbz#455664, rhbz#249512


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-78
changelog:
  - 699621 and 699620 man page fix
  - 529632 service crond status return correct status
  - 480930 set correct pie options in CFLAGS and LDFLAGS
  - 476972 crontab error with @reboot entry
  - Resolves: rhbz#699621, rhbz#699620, rhbz#529632, rhbz#480930, rhbz#476972


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-77
changelog:
  - fix setting of pam configuration in vixie-cron-4.1-loginuid.patch
  - move building environment between opening session and setting
  parameters of session
  - Resolves: rhbz#541189


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-76
changelog:
  - 222464 crond failed "Days of week" after a few hours on 1st/Jan
  - 241877 Cron does not handle home directories with group deny permissions
  - 455379 cron jobs for users without home doesn't work
  - Resolves: rhbz#241877, rhbz#222464, rhbz#455379


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-71
changelog:
  - added back patches removed for previous errata - 222461, 223532, 223894
  - Resolves: rhbz#222461, rhbz#223532, rhbz#223894


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-70
changelog:
  - removed last patches, added only CVE 235880. Removed 222461, 223532, 223894.
  - Resolves: rhbz#235880


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-64
changelog:
  - include system-auth for session in crond.pam, it now avoids
    using pam_unix if the process is crond


author: Jason Vas Dias <jvdias@redhat.com> - 4:4.1-58
changelog:
  - fix bug 199294: support for LSPP multiple per-job SELinux contexts
  - fix bug 198019: make database.c correct if crontab mtime changes 
                    while spool dir mtime does not.


author: Jason Vas Dias<jvdias@redhat.com> - 4.1-50.FC5
changelog:
  - fix bug 178436: prevent per-minute jobs being delayed into next minute
  - fix bug 178931: remove pam_unix and pam_krb5 from pam session stack


author: Jason Vas Dias<jvdias@redhat.com>
changelog:
  - fix bug 177476: make minder/mailer process run as job user 
    with user context; re-organize PAM and SELinux code


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-41.FC5
changelog:
  - patches for IBM LSPP testing:
  - Steve Grubb's patch to emit audit log message on crontab denial
  - Use of sendmail unacceptable for LSPP: provide -m <mail command> option


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-40.FC5
changelog:
  - *** NOTE : please do not modify vixie-cron without contacting ***
    *** the package maintainer (me at the moment).                ***
    *** Or at least test it first!                                ***
  - fix bug 170830: it was not the pam_stack change - the setuid
    mode of crontab was dropped for some reason.
  - apply Dan's new getseuserbyname patch
  - somehow build_env() invocation was dropped - use pam_env settings.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-39-FC5
changelog:
  - fix bug 170830: the last PAM change disabled all cron jobs.
    backing out the new PAM configuration file until I've had a
    chance to test it with replacement of pam_stack.so.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-36.FC4
changelog:
  - fix bug 162887: allow multiple /etc/cron.d crontabs for *system* user
  - further fix for bug 154920 / CAN-2005-1038 ( crontab -e ):
       invoke editor and copy operation as non-root user


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-FC4.34
changelog:
  - fix bug 160811: FC3 version compared >= FC4 version
  - fix bug 159216: add pam_loginuid support for new audit system


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-33_FC4
changelog:
  - fix bug 154922 / CAN-2005-1038: check that new crontab is 
        regular file after editor session ends.
  - fix bug 154575: use PATH_MAX (4096) as max filename length; also make 
        limits on command line and env.var. lengths sensible (131072).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-30_FC4
changelog:
  - fix bug 154065: crontab's job control broken: by 
  -     xpid = waitpid(pid,&waiter,WUNTRACED);... 
  -     if( WIFSTOPPED(waiter) )... kill(getpid(),WSTOPSIG(waiter));
  - crontab should not kill itself with SIGSTOP if its child
  - gets SIGSTOP; hence it does not need the waitpid WUNTRACED flag.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-28_FC4
changelog:
  - Required for EAL Audit certification: 
  - If pam_setcred should fail, the pam_session could fail to be
  - closed, leaving autofs user directories still mounted.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-26_FC4
changelog:
  - fix bug 151145: segfault if cronjob runs without any SELinux user 
  - security context (eg. in a broken chroot environment)


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-24_FC4
changelog:
  - Add an /etc/sysconfig/crond file for containing CRONDARGS and
  - settings like CRON_VALIDATE_MAILRCPTS .


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-24_FC4
changelog:
  - Fix bug 147636 - disable silly mail recipient name checking 
  - (do_command.c's safe_p()) by default . Can be enabled by 
  - presence of CRON_VALIDATE_MAILRCPTS variable in crond's 
  - environment - also '_'s in MAILTOs are allowed.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-22
changelog:
  - Fix bug 146073 - allow the 'pam_access' module to be used with
  - cron - set 'PAM_TTY' item to 'cron' .


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-21
changelog:
  - fix bug 142953 : allow read-only crontabs + provide -p 
  - 'permit all crontabs' option to disable mode checking.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-19
changelog:
  - crontab -e should only strip NHEADER_LINES comments 
  - (NHEADER_LINES==0), not at least one header comment line.
  - (bug 135845)


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-17
changelog:
  - Users not allowed to use 'crontab mycrontab', while
  - 'crontab < mycrontab' allowed; this is because misc.c's
  - swap_uids_back() was not using save_euid / save_egid .
  - Thanks to Mads Martin Joergensen <mmj@suse.de> for pointing this out.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-16
changelog:
  - Just found out in testing that if neither /etc/cron.{deny,allow}
  - exist, root is unable to use crontab - I'm sure root could before,
  - but is in any case meant to be able to. Allowing root to use crontab.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-14
changelog:
  - Fix for bug 130102 got dropped somehow from latest CVS.
  - This is now restored - in %post, if neither /etc/cron.{deny,allow}
  - exist, touch /etc/cron.deny, to allow all users to use crontab,
  - as was previous default vixie-cron behaviour.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-12
changelog:
  - Merged Dan's patch with vixie-cron-4.1-11 which was not 
  - latest version according to new CVS ?!?!


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-11
changelog:
  - Fixed SIGSEGV in free_user when !is_selinux_enabled() and crontab
  - has no valid jobs (bug 131390).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.10
changelog:
  - Fixed bug 130102: Restored default behaviour if neither 
  - /etc/cron.deny nor /etc/cron.allow exist - 'touch /etc/cron.deny'
  - in %post


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.8
changelog:
  - Allowed editors such as 'gedit' which do not modify original
  - file, but which rename(2) a temp file to original, to be used
  - by crontab -e (bug 129170).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.8
changelog:
  - Added documentation for '@' nicknames to crontab.5
  - (bugs 107542, 89899). Also removed 'second when' (bug 59802).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.6
changelog:
  - Added PAM 'auth sufficient pam_rootok.so' to /etc/pam.d/crond
  - (fixes bug 128843) - on dwalsh's advice.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-1
changelog:
  - Changed post-install to change mode of existing crontabs to
  - 0600 to allow run by new ISC cron 4.1


author: Jens Petersen <petersen@redhat.com> - 3.0.1-94
changelog:
  - add vixie-cron-3.0.1-cron-descriptors-125110.patch to close std descriptors
    when forking (Bernd Schmidt, 121280)
  - add vixie-cron-3.0.1-no-crontab-header-89809.patch to not prepend header to
    crontab files (Damian Menscher, 103899)
  - fix use of RETVAL in init.d script (Enrico Scholz, 97784)
  - add safer malloc call to vixie-cron-3.0.1-sprintf.patch 
  - add cron-3.0.1-crontab-syntax-error-114386.patch to fix looping on crontab
    syntax error (Miloslav Trmac, 89937)


author: Jens Petersen <petersen@redhat.com> - 3.0.1-82
changelog:
  - add vixie-cron-3.0.1-pie.patch to build crond as pie (#108414)
    [Ulrich Drepper]
  - require libselinux and buildrequire libselinux-devel


author: Jens Petersen <petersen@redhat.com> - 3.0.1-80
changelog:
  - add vixie-cron-3.0.1-vfork-105616.patch to use fork instead of vfork
    (#105616) [report and patch from ian@caliban.org]
  - update vixie-cron-3.0.1-redhat.patch not to change DESTMAN redundantly
    (it is overrriden in the spec file anyway)


author: Jens Petersen <petersen@redhat.com> - 3.0.1-75
changelog:
  - add vixie-cron-3.0.1-root_-u-85879.patch from Valdis Kletnieks to allow
    root to run "crontab -u <user>" even for users that aren't allowed to


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.1-72
changelog:
  - adjust cron.d patch so that it ignores file with names that begin with '#'
    or end with '~', '.rpmorig', '.rpmsave', or '.rpmnew'
  - merge hunk of buffer overflow patch into the cron.d patch


author: Bill Nottingham <notting@redhat.com>
changelog:
  - log as 'crond', not 'CROND' (#19410)
  - account for shifts in system clock (#23230, patch from <pererik@onedial.se>)
  - i18n-ize initscript


author: Than Ngo <than@redhat.com>
changelog:
  - add /sbin/service to Prereq
  - call /sbin/service instead service
  - fix startup position (Bug #13353)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix crond logging patch (dan@doom.cmc.msu.ru)
  - log via syslog (suggestion from jos@xos.nl)
  - put system crontab location in crontab(5) (#14842)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added a patch to get rid of the dangerous sprintf() calls
  - added BuildRoot and Prereq: /sbin/chkconfig


author: Karel Zak <kzak@redhat.com> 1.3-20
changelog:
  - #164950 - call account management and credential reinitialization functions
    (patch by Nalin Dahyabhai)


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Moved to new pam conventions.
  - Use pam according to spec, rather than abusing it as before.
  - Updated to version 1.1.
  - BuildRoot


author: Adam Tkac <atkac redhat com> 4.1.2-14.el5_5.3
changelog:
  - vncserver script: accept <+optname> option when specified as the first one
    (#494750)
  - libvnc.so: wake up from DPMS sleep state when receive mouse/keyboard event
    (#581478)


author: Adam Tkac <atkac redhat com> 4.1.2-10.1
changelog:
  - vncserver prints error when Xvnc fails to start
  - enabled RENDER on all archs
  - initialize visuals correctly
  - remove wrong vnc-render-sigfault.patch


author: Adam Tkac <atkac redhat com> 4.1.2-10
changelog:
  - build cleanup
    - vnc-maint.patch
  - removed unused patches
    - vnc-def.patch
    - vnc-s390.patch
    - vnc-fontpath.patch
    - vnc-ppc64.patch
    - vnc-build.patch


author: Adam Tkac <atkac redhat com> 4.1.2-7.el5
changelog:
  - added xorg-x11-fonts-base + xorg-x11-xauth dependencies
  - only ppc+ppc64 has enabled render extension by default


author: Jitka Kudrnacova <jkudrnac@redhat.com> - 4.1.2-3
changelog:
  - vncviewer now supports NewFBSize pseudoencoding (#180939)
  - do not BuildRequire libdrm-devel on s390, s390x, ppc64 it is not available there


author: Jitka Kudrnacova <jkudrnac@redhat.com> 4.1.1-38
changelog:
  - fixed crash of Xnvc caused by a NULL pointer in interfaces (bug #187607)
  - This also fixes crash of Xvnc when vpnc is running (bug #187069)
  - don't build on ppc64 due to intermittent build problems


author: Jitka Kudrnacova <jkudrnac@redhat.com> 4.1.1-36
changelog:
  - with default cofiguration, /etc/init.d/vncserver start will say 
    "no displays configured" (bug #182161)


author: Jitka Kudrnacova <jkudrnac@redhat.com> 4.1.1-35
changelog:
  - Add a test for existence of index.theme before calling
    gtk-update-icon-cache in post-(un)installation script,
    bug #179704


author: Tim Waugh <twaugh@redhat.com> 4.1.1-33
changelog:
  - Use VNC-provided Xregion (bug #176435).
  - Prevent restorecon error message when not present (bug #176654).


author: Tim Waugh <twaugh@redhat.com> 4.1.1-27
changelog:
  - Fix 64-bit server (bug #174702).
  - Build requires freetype-devel.
  - Build requires libXext-devel, libXtst-devel, automake, libtool, pkgconfig,
    libfontenc-devel, xorg-x11-util-macros.


author: Tim Waugh <twaugh@redhat.com> 4.1.1-26
changelog:
  - Apply patch to allow vncviewer window reparenting (bug #174640).
  - Build again on s390/s390x (bug #174569).


author: Tim Waugh <twaugh@redhat.com> 4.1.1-24
changelog:
  - Build X extension module again.
  - Install X extension module into modules/ directory.
  - Remove xscreensaver patch, since it causes badness.


author: Tim Waugh <twaugh@redhat.com> 4.1.1-23
changelog:
  - ExcludeArch s390 s390x (see bug #174569).
  - Re-base on modular xorg-x11 (bug #173323).
  - Build requires modular X things.


author: Tim Waugh <twaugh@redhat.com> 4.1.1-16
changelog:
  - Added -nohttpd option to vncserver, based on patch from bug #161288.
  - Included -nohttpd, -nolisten tcp, and -localhost options in example
    sysconfig file (bug #165334).


author: Tim Waugh <twaugh@redhat.com> 4.1.1-15
changelog:
  - Fixed xorg-x11 build (__SSP__ gets set by -fstack-protector).
  - Fixed desktop file again (bug #63689).


author: Tim Waugh <twaugh@redhat.com> 4.1-0.1
changelog:
  - 4.1 (but still 4.0 Java viewer for the moment).
  - Removed sparc patch.
  - Fixed VNC module link line (from upstream).


author: Tim Waugh <twaugh@redhat.com> 4.0-9
changelog:
  - Don't build hw/xfree86/etc.
  - Prevent xorg-x11 build failure in rman.
  - Build requires autoconf, flex, bison.
  - Use correct PATH setting when started from initscript (bug #84167).


author: Tim Waugh <twaugh@redhat.com> 4.0-1.beta5.1
changelog:
  - 4.0beta5.
  - Removed compat, f8 and crash patches.
  - Fixed via patch now that NULL is not a valid parameter default.
  - Updated gcc34 patch.


author: Tim Waugh <twaugh@redhat.com> 4.0-0.beta4.2
changelog:
  - 4.0beta4.
  - No longer need compile, dotvnc, norender patches.
  - Don't be so picky about which architectures to build on any more.
  - Build requires XFree86-devel.


author: Tim Waugh <twaugh@redhat.com> 4.0-0.beta3.7
changelog:
  - Ship vncconfig(1) front-end.
  - In default xstartup, exec /etc/vnc/xstartup if it exists.
  - Track XFree86 package.
  - Fix compilation (bug #102547).
  - Fix vncpasswd (bug #102435).


author: Tim Waugh <twaugh@redhat.com> 4.0-0.beta3.5
changelog:
  - Make default xclients file include instructions for 'normal' desktop.
  - Server subpackage doesn't require XFree86.
  - desktop file: add StartupWMClass tag
  - init script: set USER (bug #101674).
  - init script: pause when restarting to give the server a chance to stop
    (bug #84817).
  - vncpasswd: create ~/.vnc if it doesn't already exist.


author: Tim Waugh <twaugh@redhat.com> 4.0-0.beta3.4
changelog:
  - Allow old -dontdisconnect option, and behave a bit more like Xvnc used to
    if it is given (default to no password, use RFB3.3 protocol).
  - Fixed DisconnectClients bug.


author: Jiri Skala <jskala@redhat.com> - 2.0.5-24
changelog:
  - Resolves: #759364 - vsftpd child terminates when listing files with UID/GID larger than signed int


