#include <GNECalibratorDialog.h>

Inheritance diagram for GNECalibratorDialog:

Collaboration diagram for GNECalibratorDialog:

Data Structures
class	CalibratorFlowsList
	calibrator flows list More...
class	RoutesList
	route list More...
class	VTypesList
	vTypes list More...

Public Types
basic dialog type
enum class	Buttons { OK , YES_NO , YES_NO_CANCEL , ACCEPT , ACCEPT_CANCEL , ACCEPT_CANCEL_RESET , SAVE_DONTSAVE_CANCEL , RUN_CANCEL_RESET , RUN_ADVANCED_CANCEL , RERUN_BACK_OK , OK_COPY_REPORT }
enum class	OpenType { MODAL , NON_MODAL }
	Open dialog type. More...

Public Member Functions
GNEAdditional *	getElement () const
	get edited element
	GNECalibratorDialog (GNEAdditional *calibrator)
	Constructor.
void	runInternalTest (const InternalTestStep::DialogArgument *dialogArgument)
	run internal test
	~GNECalibratorDialog ()
	destructor
FOX-callbacks
long	onCmdAccept (FXObject , FXSelector, void )
	event after press accept button
long	onCmdReset (FXObject , FXSelector, void )
	event after press reset button
FOX-callbacks
event after press accept button
long	onCmdCancel (FXObject , FXSelector, void )
	called when cancel or no button is pressed
long	onCmdAbort (FXObject , FXSelector, void )
	called when abort is called either closing dialog or pressing abort button
FOX-callbacks
virtual long	onCmdRun (FXObject , FXSelector, void )
	called when run button is pressed (must be reimplemented in children depending of Buttons)
virtual long	onCmdBack (FXObject , FXSelector, void )
	called when back button is pressed (must be reimplemented in children depending of Buttons)
virtual long	onCmdAdvanced (FXObject , FXSelector, void )
	called when advanced button is pressed (must be reimplemented in children depending of Buttons)
virtual long	onCmdCopy (FXObject , FXSelector, void )
	called when copy button is pressed (must be reimplemented in children depending of Buttons)
virtual long	onCmdReport (FXObject , FXSelector, void )
	called when report button is pressed (must be reimplemented in children depending of Buttons)
long	onKeyPress (FXObject obj, FXSelector sel, void ptr)
	called when user presses a key on the dialog
long	onKeyRelease (FXObject obj, FXSelector sel, void ptr)
	called when user releases a key on the dialog

Protected Member Functions
long	acceptElementDialog ()
	close dialog commiting changes
long	closeDialogAborting ()
	close dialog aborting the changes
long	closeDialogAccepting ()
	close dialog accepting the changes
long	closeDialogCanceling ()
	close dialog declining the changes
void	openDialog (FXWindow *focusableElement=nullptr)
	open dialog
void	resetChanges ()
	reset changes did in this dialog.
void	updateIcon (GUIIcon newIcon)
	update icon
void	updateTitle (const std::string &newTitle)
	update title

Protected Attributes
FXButton *	myAbortButton = nullptr
	abort button
FXButton *	myAcceptButton = nullptr
	accept button
FXButton *	myAdvancedButton = nullptr
	advanced button
GNEApplicationWindow *	myApplicationWindow = nullptr
	FOX needs this.
FXButton *	myBackButton = nullptr
	back button
CalibratorFlowsList *	myCalibratorFlows
	list with calibrator flows
FXButton *	myCancelButton = nullptr
	cancel button
FXVerticalFrame *	myContentFrame = nullptr
	content frame
FXButton *	myCopyButton = nullptr
	copy button
GNEAdditional *	myElement
	pointer to edited element
FXButton *	myReportButton = nullptr
	report button
FXButton *	myResetButton = nullptr
	reset button
FXWindow *	myRestoringFocusWindow = nullptr
	FXWindows that restoring focus window.
Result	myResult = Result::CANCEL
	result to indicate if this dialog was closed accepting or rejecting changes
RoutesList *	myRoutes
	list with routes
FXButton *	myRunButton = nullptr
	run button
DialogType	myType = DialogType::DEFAULT
	dialog type
VTypesList *	myVTypes
	list with vTypes

Private Member Functions
void	buildDialog (GUIIcon titleIcon, Buttons buttons)
	build dialog
	GNECalibratorDialog (const GNECalibratorDialog &)=delete
	Invalidated copy constructor.
GNECalibratorDialog &	operator= (const GNECalibratorDialog &)=delete
	Invalidated assignment operator.

Private Attributes
std::string	myChangesDescription
	description of changes did in this element dialog
FXButton *	myFocusButton = nullptr
	focus button, used for focusing the default button when dialog is opened
OpenType	myOpenType
	open type
bool	myTesting = false
	flag to indicate if this dialog is being tested using internal test

Resize mode
Result	getResult () const
	get result to indicate if this dialog was closed accepting or rejecting changes
GNEApplicationWindow *	getApplicationWindow () const
	get pointer to the application window
FXVerticalFrame *	getContentFrame () const
	get content frame
void	setRestoringFocusWindow (FXWindow *window)
	wet FXWindows uses for restoring focus
enum class	ResizeMode { STATIC , RESIZABLE }
enum class	Result { ACCEPT , CANCEL , ABORT , ACCEPT_ALL , CANCEL_ALL }
	list of possible results when closing the dialog More...

Detailed Description

Definition at line 35 of file GNECalibratorDialog.h.

Member Enumeration Documentation

◆ Buttons

enum class GNEDialog::Buttons

stronginherited

Enumerator
OK
YES_NO
YES_NO_CANCEL
ACCEPT
ACCEPT_CANCEL
ACCEPT_CANCEL_RESET
SAVE_DONTSAVE_CANCEL
RUN_CANCEL_RESET
RUN_ADVANCED_CANCEL
RERUN_BACK_OK
OK_COPY_REPORT

Definition at line 43 of file GNEDialog.h.

◆ OpenType

enum class GNEDialog::OpenType

stronginherited

Open dialog type.

Enumerator
MODAL
NON_MODAL

Definition at line 58 of file GNEDialog.h.

◆ ResizeMode

enum class GNEDialog::ResizeMode

stronginherited

Enumerator
STATIC
RESIZABLE

Definition at line 64 of file GNEDialog.h.

◆ Result

enum class GNEDialog::Result

stronginherited

list of possible results when closing the dialog

Enumerator
ACCEPT
CANCEL
ABORT
ACCEPT_ALL
CANCEL_ALL

Definition at line 70 of file GNEDialog.h.

Constructor & Destructor Documentation

◆ GNECalibratorDialog() [1/2]

GNECalibratorDialog::GNECalibratorDialog ( GNEAdditional * calibrator )

Constructor.

Definition at line 38 of file GNECalibratorDialog.cpp.

References GNETemplateElementDialog< GNEAdditional >::GNETemplateElementDialog(), GUIDesignAuxiliarFrame, GUIDesignUniformHorizontalFrame, myCalibratorFlows, GNETemplateElementDialog< GNEAdditional >::myContentFrame, myRoutes, myVTypes, and GNETemplateElementDialog< GNEAdditional >::openDialog().

Referenced by GNECalibratorDialog::CalibratorFlowsList::CalibratorFlowsList(), GNECalibratorDialog(), operator=(), GNECalibratorDialog::RoutesList::RoutesList(), and GNECalibratorDialog::VTypesList::VTypesList().

Here is the caller graph for this function:

◆ ~GNECalibratorDialog()

GNECalibratorDialog::~GNECalibratorDialog ( )

destructor

Definition at line 55 of file GNECalibratorDialog.cpp.

◆ GNECalibratorDialog() [2/2]

GNECalibratorDialog::GNECalibratorDialog ( const GNECalibratorDialog & )

privatedelete

Invalidated copy constructor.

References GNECalibratorDialog().

Member Function Documentation

◆ acceptElementDialog()

long GNETemplateElementDialog< GNEAdditional >::acceptElementDialog ( )

inlineprotectedinherited

close dialog commiting changes

Definition at line 88 of file GNETemplateElementDialog.h.

Referenced by GNECalibratorDialog::onCmdAccept(), GNERerouterDialog::onCmdAccept(), GNERerouterIntervalDialog::onCmdAccept(), and GNEVariableSpeedSignDialog::onCmdAccept().

Here is the caller graph for this function:

◆ buildDialog()

void GNEDialog::buildDialog	(	GUIIcon	titleIcon,
		GNEDialog::Buttons	buttons )

privateinherited

build dialog

Definition at line 327 of file GNEDialog.cpp.

References ACCEPT, ACCEPT_CANCEL, ACCEPT_CANCEL_RESET, BACK, GUIDesigns::buildFXButton(), CANCEL, COPY, GUIIconSubSys::getIcon(), GITHUB, GUIDesignAuxiliarFrame, GUIDesignAuxiliarHorizontalFrame, GUIDesignButtonDialog, GUIDesignDialogButtonsHorizontalFrame, GUIDesignDialogContentFrame, GUIDesignHorizontalSeparator, MID_GNE_ABORT, MID_GNE_BUTTON_ACCEPT, MID_GNE_BUTTON_ADVANCED, MID_GNE_BUTTON_BACK, MID_GNE_BUTTON_CANCEL, MID_GNE_BUTTON_COPY, MID_GNE_BUTTON_REPORT, MID_GNE_BUTTON_RESET, MID_GNE_BUTTON_RUN, myAbortButton, myAcceptButton, myAdvancedButton, myBackButton, myCancelButton, myContentFrame, myCopyButton, myFocusButton, myReportButton, myResetButton, myRunButton, NO, OK, OK_COPY_REPORT, OPTIONS, RERUN_BACK_OK, RESET, RUN_ADVANCED_CANCEL, RUN_CANCEL_RESET, SAVE, SAVE_DONTSAVE_CANCEL, START, TL, YES, YES_NO, and YES_NO_CANCEL.

◆ closeDialogAborting()

long GNEDialog::closeDialogAborting ( )

protectedinherited

close dialog aborting the changes

Definition at line 295 of file GNEDialog.cpp.

References ABORT, MODAL, myApplicationWindow, myOpenType, myRestoringFocusWindow, myResult, and myTesting.

Referenced by onCmdAbort(), GNEOverwriteElement::onCmdAbort(), GNETemplateElementDialog< T >::onCmdAbort(), and onKeyPress().

Here is the caller graph for this function:

◆ closeDialogAccepting()

long GNEDialog::closeDialogAccepting ( )

protectedinherited

close dialog accepting the changes

Definition at line 255 of file GNEDialog.cpp.

References ACCEPT, MODAL, myApplicationWindow, myOpenType, myRestoringFocusWindow, myResult, and myTesting.

Referenced by GNETemplateElementDialog< T >::acceptElementDialog(), onCmdAccept(), GNEDistributionRefDialog::onCmdAccept(), GNEFileDialog::onCmdAccept(), GNEFixElementsDialog< T >::onCmdAccept(), GNEOverwriteElement::onCmdAccept(), GNEParametersDialog::onCmdAccept(), GNESaveDialog::onCmdAccept(), GNEVClassesDialog::onCmdAccept(), and GNEPythonToolDialog::onCmdRun().

Here is the caller graph for this function:

◆ closeDialogCanceling()

long GNEDialog::closeDialogCanceling ( )

protectedinherited

close dialog declining the changes

Definition at line 275 of file GNEDialog.cpp.

References CANCEL, MODAL, myApplicationWindow, myOpenType, myRestoringFocusWindow, myResult, and myTesting.

Referenced by GNERunDialog::onCmdAbort(), GNEDistributionRefDialog::onCmdAccept(), GNEFixElementsDialog< T >::onCmdAccept(), GNERunNetgenerateDialog::onCmdAccept(), GNERunPythonToolDialog::onCmdAccept(), GNEVClassesDialog::onCmdAccept(), GNENetgenerateDialog::onCmdAdvanced(), GNERunNetgenerateDialog::onCmdBack(), onCmdCancel(), GNEFilePathDialog::onCmdCancel(), GNENeteditOptionsDialog::onCmdCancel(), GNENetgenerateOptionsDialog::onCmdCancel(), GNEOverwriteElement::onCmdCancel(), GNESaveDialog::onCmdCancel(), GNESumoOptionsDialog::onCmdCancel(), GNETemplateElementDialog< T >::onCmdCancel(), GNEVClassesDialog::onCmdCancel(), GNENetgenerateDialog::onCmdRun(), and GNENetgenerateOptionsDialog::onCmdRun().

Here is the caller graph for this function:

◆ getApplicationWindow()

GNEApplicationWindow * GNEDialog::getApplicationWindow ( ) const

inherited

get pointer to the application window

Definition at line 102 of file GNEDialog.cpp.

References myApplicationWindow.

Referenced by GNEPythonToolDialog::buildArguments().

Here is the caller graph for this function:

◆ getContentFrame()

FXVerticalFrame * GNEDialog::getContentFrame ( ) const

inherited

get content frame

Definition at line 108 of file GNEDialog.cpp.

References myContentFrame.

Referenced by GNEColorDialog::GNEColorDialog(), and GNEVClassesDialog::GNEVClassesDialog().

Here is the caller graph for this function:

◆ getElement()

GNEAdditional * GNETemplateElementDialog< GNEAdditional >::getElement ( ) const

inlineinherited

get edited element

Definition at line 50 of file GNETemplateElementDialog.h.

◆ getResult()

GNEDialog::Result GNEDialog::getResult ( ) const

inherited

get result to indicate if this dialog was closed accepting or rejecting changes

Definition at line 96 of file GNEDialog.cpp.

References myResult.

Referenced by GNEDataHandler::checkDuplicatedDataSet(), GNEMeanDataHandler::checkDuplicatedMeanDataElement(), GNEAdditionalHandler::checkElement(), GNERouteHandler::checkElement(), and GNEDistributionFrame::DistributionValuesEditor::onCmdAddRow().

Here is the caller graph for this function:

◆ onCmdAbort()

long GNETemplateElementDialog< GNEAdditional >::onCmdAbort	(	FXObject *	,
		FXSelector	,
		void *	)

inlinevirtualinherited

called when abort is called either closing dialog or pressing abort button

Reimplemented from GNEDialog.

Definition at line 72 of file GNETemplateElementDialog.h.

◆ onCmdAccept()

long GNECalibratorDialog::onCmdAccept	(	FXObject *	,
		FXSelector	,
		void *	)

virtual

event after press accept button

Implements GNETemplateElementDialog< GNEAdditional >.

Definition at line 65 of file GNECalibratorDialog.cpp.

References GNETemplateElementDialog< GNEAdditional >::acceptElementDialog(), GNE_TAG_CALIBRATOR_FLOW, myCalibratorFlows, GNETemplateElementDialog< GNEAdditional >::myElement, myRoutes, myVTypes, SUMO_TAG_ROUTE, SUMO_TAG_VTYPE, TLF, and toString().

◆ onCmdAdvanced()

long GNEDialog::onCmdAdvanced	(	FXObject *	,
		FXSelector	,
		void *	)

virtualinherited

called when advanced button is pressed (must be reimplemented in children depending of Buttons)

Reimplemented in GNENetgenerateDialog.

Definition at line 156 of file GNEDialog.cpp.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ onCmdBack()

long GNEDialog::onCmdBack	(	FXObject *	,
		FXSelector	,
		void *	)

virtualinherited

called when back button is pressed (must be reimplemented in children depending of Buttons)

Reimplemented in GNERunDialog, GNERunNetgenerateDialog, GNERunNetgenerateDialog, GNERunPythonToolDialog, and GNERunPythonToolDialog.

Definition at line 150 of file GNEDialog.cpp.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ onCmdCancel()

long GNETemplateElementDialog< GNEAdditional >::onCmdCancel	(	FXObject *	,
		FXSelector	,
		void *	)

inlinevirtualinherited

called when cancel or no button is pressed

Reimplemented from GNEDialog.

Definition at line 66 of file GNETemplateElementDialog.h.

◆ onCmdCopy()

long GNEDialog::onCmdCopy	(	FXObject *	,
		FXSelector	,
		void *	)

virtualinherited

called when copy button is pressed (must be reimplemented in children depending of Buttons)

Reimplemented in GNECrashDialog.

Definition at line 162 of file GNEDialog.cpp.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ onCmdReport()

long GNEDialog::onCmdReport	(	FXObject *	,
		FXSelector	,
		void *	)

virtualinherited

called when report button is pressed (must be reimplemented in children depending of Buttons)

Reimplemented in GNECrashDialog.

Definition at line 168 of file GNEDialog.cpp.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ onCmdReset()

long GNECalibratorDialog::onCmdReset	(	FXObject *	,
		FXSelector	,
		void *	)

virtual

event after press reset button

Implements GNETemplateElementDialog< GNEAdditional >.

Definition at line 91 of file GNECalibratorDialog.cpp.

References myCalibratorFlows, myRoutes, myVTypes, and GNETemplateElementDialog< GNEAdditional >::resetChanges().

◆ onCmdRun()

long GNEDialog::onCmdRun	(	FXObject *	,
		FXSelector	,
		void *	)

virtualinherited

called when run button is pressed (must be reimplemented in children depending of Buttons)

Reimplemented in GNENetgenerateDialog, GNENetgenerateOptionsDialog, GNEPythonToolDialog, and GNERunDialog.

Definition at line 144 of file GNEDialog.cpp.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ onKeyPress()

long GNEDialog::onKeyPress	(	FXObject *	obj,
		FXSelector	sel,
		void *	ptr )

inherited

called when user presses a key on the dialog

Definition at line 174 of file GNEDialog.cpp.

References closeDialogAborting(), myApplicationWindow, and myTesting.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ onKeyRelease()

long GNEDialog::onKeyRelease	(	FXObject *	obj,
		FXSelector	sel,
		void *	ptr )

inherited

called when user releases a key on the dialog

Definition at line 190 of file GNEDialog.cpp.

Referenced by FXDEFMAP().

Here is the caller graph for this function:

◆ openDialog()

void GNEDialog::openDialog ( FXWindow * focusableElement = nullptr )

protectedinherited

open dialog

Definition at line 200 of file GNEDialog.cpp.

Referenced by GNEAboutDialog::GNEAboutDialog(), GNEBasicDialog::GNEBasicDialog(), GNEColorDialog::GNEColorDialog(), GNECrashDialog::GNECrashDialog(), GNEDistributionRefDialog::GNEDistributionRefDialog(), GNEFileDialog::GNEFileDialog(), GNEFilePathDialog::GNEFilePathDialog(), GNEHelpAttributesDialog::GNEHelpAttributesDialog(), GNENeteditOptionsDialog::GNENeteditOptionsDialog(), GNENetgenerateDialog::GNENetgenerateDialog(), GNENetgenerateOptionsDialog::GNENetgenerateOptionsDialog(), GNEOverwriteElement::GNEOverwriteElement(), GNEParametersDialog::GNEParametersDialog(), GNEPythonToolDialog::GNEPythonToolDialog(), GNERunNetgenerateDialog::GNERunNetgenerateDialog(), GNERunPythonToolDialog::GNERunPythonToolDialog(), GNESaveDialog::GNESaveDialog(), GNESumoOptionsDialog::GNESumoOptionsDialog(), GNEUndoListDialog::GNEUndoListDialog(), and GNEVClassesDialog::GNEVClassesDialog().

Here is the caller graph for this function:

◆ operator=()

GNECalibratorDialog & GNECalibratorDialog::operator= ( const GNECalibratorDialog & )

privatedelete

Invalidated assignment operator.

References GNECalibratorDialog().

◆ resetChanges()

void GNETemplateElementDialog< GNEAdditional >::resetChanges ( )

inlineprotectedinherited

reset changes did in this dialog.

Definition at line 94 of file GNETemplateElementDialog.h.

Referenced by GNECalibratorDialog::onCmdReset(), GNERerouterDialog::onCmdReset(), GNERerouterIntervalDialog::onCmdReset(), and GNEVariableSpeedSignDialog::onCmdReset().

Here is the caller graph for this function:

◆ runInternalTest()

void GNECalibratorDialog::runInternalTest ( const InternalTestStep::DialogArgument * dialogArgument )

virtual

run internal test

Implements GNETemplateElementDialog< GNEAdditional >.

Definition at line 59 of file GNECalibratorDialog.cpp.

◆ setRestoringFocusWindow()

void GNEDialog::setRestoringFocusWindow ( FXWindow * window )

inherited

wet FXWindows uses for restoring focus

Definition at line 114 of file GNEDialog.cpp.

References myRestoringFocusWindow.

Referenced by GNEFileDialog::GNEFileDialog().

Here is the caller graph for this function:

◆ updateIcon()

void GNEDialog::updateIcon ( GUIIcon newIcon )

protectedinherited

update icon

Definition at line 321 of file GNEDialog.cpp.

References GUIIconSubSys::getIcon().

Referenced by GNEFileDialog::GNEFileDialog().

Here is the caller graph for this function:

◆ updateTitle()

void GNEDialog::updateTitle ( const std::string & newTitle )

protectedinherited

update title

Definition at line 315 of file GNEDialog.cpp.

Referenced by GNEFileDialog::GNEFileDialog().

Here is the caller graph for this function:

Field Documentation

◆ myAbortButton

FXButton* GNEDialog::myAbortButton = nullptr

protectedinherited

abort button

Definition at line 161 of file GNEDialog.h.

Referenced by buildDialog().

◆ myAcceptButton

FXButton* GNEDialog::myAcceptButton = nullptr

protectedinherited

accept button

Definition at line 155 of file GNEDialog.h.

Referenced by buildDialog(), GNEFileDialog::GNEFileDialog(), GNEDistributionRefDialog::onCmdSetProbability(), GNEDistributionRefDialog::onCmdSetReference(), and GNERunDialog::updateDialogButtons().

◆ myAdvancedButton

FXButton* GNEDialog::myAdvancedButton = nullptr

protectedinherited

advanced button

Definition at line 173 of file GNEDialog.h.

Referenced by buildDialog(), and GNENetgenerateDialog::updateRunButtons().

◆ myApplicationWindow

GNEApplicationWindow* GNEDialog::myApplicationWindow = nullptr

protectedinherited

FOX needs this.

pointer to the main window

Definition at line 146 of file GNEDialog.h.

◆ myBackButton

FXButton* GNEDialog::myBackButton = nullptr

protectedinherited

back button

Definition at line 170 of file GNEDialog.h.

Referenced by buildDialog(), and GNERunDialog::updateDialogButtons().

◆ myCalibratorFlows

CalibratorFlowsList* GNECalibratorDialog::myCalibratorFlows

protected

list with calibrator flows

Definition at line 137 of file GNECalibratorDialog.h.

Referenced by GNECalibratorDialog(), onCmdAccept(), and onCmdReset().

◆ myCancelButton

FXButton* GNEDialog::myCancelButton = nullptr

protectedinherited

cancel button

Definition at line 158 of file GNEDialog.h.

Referenced by buildDialog().

◆ myChangesDescription

std::string GNETemplateElementDialog< GNEAdditional >::myChangesDescription

privateinherited

description of changes did in this element dialog

Definition at line 102 of file GNETemplateElementDialog.h.

◆ myContentFrame

FXVerticalFrame* GNEDialog::myContentFrame = nullptr

protectedinherited

content frame

Definition at line 152 of file GNEDialog.h.

Referenced by buildDialog(), getContentFrame(), GNEAboutDialog::GNEAboutDialog(), GNEBasicDialog::GNEBasicDialog(), GNECrashDialog::GNECrashDialog(), GNEDistributionRefDialog::GNEDistributionRefDialog(), GNEFilePathDialog::GNEFilePathDialog(), GNEFixElementsDialog< T >::GNEFixElementsDialog(), GNEHelpAttributesDialog::GNEHelpAttributesDialog(), GNENetgenerateDialog::GNENetgenerateDialog(), GNEOverwriteElement::GNEOverwriteElement(), GNEParametersDialog::GNEParametersDialog(), GNEPythonToolDialog::GNEPythonToolDialog(), GNERunDialog::GNERunDialog(), GNESaveDialog::GNESaveDialog(), and GNEUndoListDialog::GNEUndoListDialog().

◆ myCopyButton

FXButton* GNEDialog::myCopyButton = nullptr

protectedinherited

copy button

Definition at line 176 of file GNEDialog.h.

Referenced by buildDialog(), and GNECrashDialog::GNECrashDialog().

◆ myElement

GNEAdditional* GNETemplateElementDialog< GNEAdditional >::myElement

protectedinherited

pointer to edited element

Definition at line 85 of file GNETemplateElementDialog.h.

Referenced by GNECalibratorDialog::onCmdAccept(), GNERerouterDialog::onCmdAccept(), GNERerouterIntervalDialog::onCmdAccept(), and GNEVariableSpeedSignDialog::onCmdAccept().

◆ myFocusButton

FXButton* GNEDialog::myFocusButton = nullptr

privateinherited

focus button, used for focusing the default button when dialog is opened

Definition at line 207 of file GNEDialog.h.

Referenced by buildDialog().

◆ myOpenType

OpenType GNEDialog::myOpenType

privateinherited

open type

Definition at line 210 of file GNEDialog.h.

Referenced by closeDialogAborting(), closeDialogAccepting(), closeDialogCanceling(), GNEDialog(), and GNEDialog().

◆ myReportButton

FXButton* GNEDialog::myReportButton = nullptr

protectedinherited

report button

Definition at line 179 of file GNEDialog.h.

Referenced by buildDialog().

◆ myResetButton

FXButton* GNEDialog::myResetButton = nullptr

protectedinherited

reset button

Definition at line 164 of file GNEDialog.h.

Referenced by buildDialog().

◆ myRestoringFocusWindow

FXWindow* GNEDialog::myRestoringFocusWindow = nullptr

protectedinherited

FXWindows that restoring focus window.

Definition at line 149 of file GNEDialog.h.

Referenced by closeDialogAborting(), closeDialogAccepting(), closeDialogCanceling(), and setRestoringFocusWindow().

◆ myResult

Result GNEDialog::myResult = Result::CANCEL

protectedinherited

result to indicate if this dialog was closed accepting or rejecting changes

Definition at line 185 of file GNEDialog.h.

Referenced by closeDialogAborting(), closeDialogAccepting(), closeDialogCanceling(), getResult(), GNESaveDialog::onCmdAccept(), and GNESaveDialog::onCmdCancel().

◆ myRoutes

RoutesList* GNECalibratorDialog::myRoutes

protected

list with routes

Definition at line 131 of file GNECalibratorDialog.h.

Referenced by GNECalibratorDialog(), onCmdAccept(), and onCmdReset().

◆ myRunButton

FXButton* GNEDialog::myRunButton = nullptr

protectedinherited

run button

Definition at line 167 of file GNEDialog.h.

Referenced by buildDialog(), GNERunDialog::updateDialogButtons(), and GNENetgenerateDialog::updateRunButtons().

◆ myTesting

bool GNEDialog::myTesting = false

privateinherited

flag to indicate if this dialog is being tested using internal test

Definition at line 213 of file GNEDialog.h.

Referenced by closeDialogAborting(), closeDialogAccepting(), closeDialogCanceling(), and onKeyPress().

◆ myType

DialogType GNEDialog::myType = DialogType::DEFAULT

protectedinherited

dialog type

Definition at line 182 of file GNEDialog.h.

Referenced by GNEDialog(), and GNEDialog().

◆ myVTypes

VTypesList* GNECalibratorDialog::myVTypes

protected

list with vTypes

Definition at line 134 of file GNECalibratorDialog.h.

Referenced by GNECalibratorDialog(), onCmdAccept(), and onCmdReset().

The documentation for this class was generated from the following files:

Data Structures

Public Types

Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Resize mode

Detailed Description

Member Enumeration Documentation

◆ Buttons

◆ OpenType

◆ ResizeMode

◆ Result

Constructor & Destructor Documentation

◆ GNECalibratorDialog() [1/2]

◆ ~GNECalibratorDialog()

◆ GNECalibratorDialog() [2/2]

Member Function Documentation

◆ acceptElementDialog()

◆ buildDialog()

◆ closeDialogAborting()

◆ closeDialogAccepting()

◆ closeDialogCanceling()

◆ getApplicationWindow()

◆ getContentFrame()

◆ getElement()

◆ getResult()

◆ onCmdAbort()

◆ onCmdAccept()

◆ onCmdAdvanced()

◆ onCmdBack()

◆ onCmdCancel()

◆ onCmdCopy()

◆ onCmdReport()

◆ onCmdReset()

◆ onCmdRun()

◆ onKeyPress()

◆ onKeyRelease()

◆ openDialog()

◆ operator=()

◆ resetChanges()

◆ runInternalTest()

◆ setRestoringFocusWindow()

◆ updateIcon()

◆ updateTitle()

Field Documentation

◆ myAbortButton

◆ myAcceptButton

◆ myAdvancedButton

◆ myApplicationWindow

◆ myBackButton

◆ myCalibratorFlows

◆ myCancelButton

◆ myChangesDescription

◆ myContentFrame

◆ myCopyButton

◆ myElement

◆ myFocusButton

◆ myOpenType

◆ myReportButton

◆ myResetButton

◆ myRestoringFocusWindow

◆ myResult

◆ myRoutes

◆ myRunButton

◆ myTesting

◆ myType

◆ myVTypes