Xpetra_Parameters.hpp

Go to the documentation of this file.

// @HEADER
//
// ***********************************************************************
//
//             Xpetra: A linear algebra interface package
//                  Copyright 2012 Sandia Corporation
//
// Under the terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
// the U.S. Government retains certain rights in this software.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact
//                    Jonathan Hu       (jhu@sandia.gov)
//                    Andrey Prokopenko (aprokop@sandia.gov)
//                    Ray Tuminaro      (rstumin@sandia.gov)
//
// ***********************************************************************
//
// @HEADER
#ifndef XPETRA_PARAMETERS_HPP
#define XPETRA_PARAMETERS_HPP
 
#include <Teuchos_Describable.hpp>
#include <Teuchos_VerboseObject.hpp>
#include <Teuchos_CommandLineProcessor.hpp>
 
#include <Xpetra_Map.hpp> // for UnderlyingLib definition
#include <Xpetra_Utils.hpp> // for toString(lib_)
 
namespace Xpetra {
 
  enum Instantiation {
    DOUBLE_INT_INT,
    DOUBLE_INT_LONGINT,
    DOUBLE_INT_LONGLONGINT,
    COMPLEX_INT_INT,
    FLOAT_INT_INT
  };
 
  class Parameters
    : public Teuchos::VerboseObject<Parameters>, public Teuchos::Describable
  {
 
  public:
 
    Parameters(Teuchos::CommandLineProcessor& clp) {
      setCLP(clp);
    }
 
    void setCLP(Teuchos::CommandLineProcessor& clp) {
      int nOptions=0;                                  // Gives the number of possible option values to select
      const int maxOptions=2;                          // No more than 2 libraries are supported right now
      Xpetra::UnderlyingLib optionValues[maxOptions];  // Array that gives the numeric values for each option.
      const char*           optionNames [maxOptions];  // Array that gives the name used in the commandline for each option.
 
      std::stringstream documentation; // documentation for the option
      //documentation << "linear algebra library (Epetra, Tpetra)";
      documentation << "linear algebra library (";
 
      // Default is Tpetra if available. If not, default is Epetra
#if defined(HAVE_XPETRA_EPETRA)
      documentation << "Epetra";
      lib_ = Xpetra::UseEpetra; // set default (if Tpetra support is missing)
      optionValues[nOptions] = Xpetra::UseEpetra;
      //optionValues[nOptions] = "epetra"; //TODO: do not break compatibility right now
      optionNames[nOptions] = "Epetra";
      nOptions++;
#endif
#if defined(HAVE_XPETRA_TPETRA)
#  if defined(HAVE_XPETRA_EPETRA)
      documentation << ", ";
#  endif
      documentation << "Tpetra";
      lib_ = Xpetra::UseTpetra; // set default
      optionValues[nOptions] = Xpetra::UseTpetra;
      //optionsValues[nOptions] = "tpetra"; //TODO: do not break compatibility right now
      optionNames[nOptions] = "Tpetra";
      nOptions++;
#endif
      documentation << ")";
 
      clp.setOption<Xpetra::UnderlyingLib>("linAlgebra", &lib_, nOptions, optionValues, optionNames, documentation.str().c_str());
 
#if defined(HAVE_XPETRA_TPETRA)
      int nInstOptions=0;                                     // Gives the number of possible option values to select
      const int   maxInstOptions=5;                           // No more than 5 instantiations are supported right now
      Xpetra::Instantiation instOptionValues[maxInstOptions]; // Array that gives the numeric values for each option.
      const char *          instOptionNames [maxInstOptions]; // Array that gives the name used in the commandline for each option.
 
      // The ordering of these blocks determines the default behavior.
      // We test the first available instantiation from the bottom
      // (i.e. DOUBLE_INT_INT runs if nothing else is available).
#  if defined(HAVE_MUELU_INST_DOUBLE_INT_INT) || defined(HAVE_TPETRA_INST_DOUBLE) && defined(HAVE_TPETRA_INST_INT_INT)
      inst_ = Xpetra::DOUBLE_INT_INT;  // set default
      instOptionValues[nInstOptions] = Xpetra::DOUBLE_INT_INT;
      instOptionNames[nInstOptions] = "DOUBLE_INT_INT";
      nInstOptions++;
#  endif
#  if defined(HAVE_MUELU_INST_DOUBLE_INT_LONGINT) || defined(HAVE_TPETRA_INST_DOUBLE) && defined(HAVE_TPETRA_INST_INT_LONG)
      inst_ = Xpetra::DOUBLE_INT_LONGINT;  // set default
      instOptionValues[nInstOptions] = Xpetra::DOUBLE_INT_LONGINT;
      instOptionNames[nInstOptions] = "DOUBLE_INT_LONGINT";
      nInstOptions++;
#  endif
#  if defined(HAVE_MUELU_INST_DOUBLE_INT_LONGLONGINT) || defined(HAVE_TPETRA_INST_DOUBLE) && defined(HAVE_TPETRA_INST_INT_LONG_LONG)
      inst_ = Xpetra::DOUBLE_INT_LONGLONGINT;  // set default
      instOptionValues[nInstOptions] = Xpetra::DOUBLE_INT_LONGLONGINT;
      instOptionNames[nInstOptions] = "DOUBLE_INT_LONGLONGINT";
      nInstOptions++;
#  endif
#  if defined(HAVE_MUELU_INST_COMPLEX_INT_INT) || defined(HAVE_TPETRA_INST_COMPLEX_DOUBLE) && defined(HAVE_TPETRA_INST_INT_INT)
      inst_ = Xpetra::COMPLEX_INT_INT;  // set default
      instOptionValues[nInstOptions] = Xpetra::COMPLEX_INT_INT;
      instOptionNames[nInstOptions] = "COMPLEX_INT_INT";
      nInstOptions++;
#  endif
#  if defined(HAVE_MUELU_INST_FLOAT_INT_INT) || defined(HAVE_TPETRA_INST_FLOAT) && defined(HAVE_TPETRA_INST_INT_INT)
      inst_ = Xpetra::FLOAT_INT_INT;  // set default
      instOptionValues[nInstOptions] = Xpetra::FLOAT_INT_INT;
      instOptionNames[nInstOptions] = "FLOAT_INT_INT";
      nInstOptions++;
#  endif
      std::stringstream instDocumentation; // documentation for the option
      instDocumentation << "choice of instantiation";
 
      clp.setOption<Xpetra::Instantiation>("instantiation", &inst_, nInstOptions, instOptionValues, instOptionNames, instDocumentation.str().c_str());
#endif
 
    }
 
    void check() const {
      //TODO with ifdef...
    }
 
    Xpetra::UnderlyingLib GetLib() const {
      check();
      return lib_;
    }
 
    Xpetra::Instantiation GetInstantiation() const {
      check();
      return inst_;
    }
 
 
 
    std::string description() const {
      std::ostringstream out;
      out << Teuchos::Describable::description();
      out << "{lib = "  << toString(lib_) << "} ";
      return out.str();
    }
 
    void describe(Teuchos::FancyOStream &out, const Teuchos::EVerbosityLevel verbLevel = verbLevel_default) const {
      using std::endl;
      int vl = (verbLevel == Teuchos::VERB_DEFAULT) ? Teuchos::VERB_LOW : verbLevel;
      if (vl == Teuchos::VERB_NONE) return;
 
      if (vl == Teuchos::VERB_LOW) { out << description() << endl; } else { out << Teuchos::Describable::description() << endl; }
 
      if (vl == Teuchos::VERB_MEDIUM || vl == Teuchos::VERB_HIGH || vl == Teuchos::VERB_EXTREME) {
        Teuchos::OSTab tab1(out);
        out << "Linear algebra library: " << toString(lib_) << endl;
      }
    }
 
 
  private:
    Xpetra::UnderlyingLib lib_;
    Xpetra::Instantiation inst_;
  };
 
}
 
#endif